[Wed Oct 19 02:20:47 2011] Detection parameters:
  Position = (119.3, 643.0) = 17 55 27.52 66 34 8.2
  Extent = 0.5" x 0.5", rotation angle = 49 degrees
  Source counts = 10.8 +/- 3.3
  Background counts = 0.2
  Rate = 0.0008 +/- 0.0002

[Wed Oct 19 02:20:47 2011] Off-axis axis estimate = 3.26'
[Wed Oct 19 02:21:23 2011] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 02:21:23 2011] Initial guess for spatial extent in simple fitting = 0.64"
[Wed Oct 19 02:21:23 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.935
[Wed Oct 19 02:21:23 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.64"
[Wed Oct 19 02:21:25 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass0_src6.ximg exists
[Wed Oct 19 02:21:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12931_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 02:21:25 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Oct 19 02:21:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12931_pi14-548_cl_pass0_src6.csv
[Wed Oct 19 02:21:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12931_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12931_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 02:21:25 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Oct 19 02:21:25 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Oct 19 02:21:25 2011] Fit fullrun_ccd3_acisf12931_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Oct 19 02:21:31 2011] Spatial fit model total counts = 10.419800, observed total counts = 11.000000
[Wed Oct 19 02:21:31 2011] Offset between fit and detection position for source 1 = 0.705342 pixels
[Wed Oct 19 02:21:31 2011] 10.419800 total counts/ 0.000000 bgd. counts: snr = 69287569301914.421875
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.705342 pixels
  Position = (119.9, 643.4) = 17 55 27.52 66 34 8.1
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 10.4 +/- 3.2
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Wed Oct 19 02:21:31 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 02:21:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 02:21:31 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 02:21:31 2011] Source does appear to be extended
[Wed Oct 19 02:21:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 02:21:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 02:21:47 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Wed Oct 19 02:21:47 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.920
[Wed Oct 19 02:21:47 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.52"
[Wed Oct 19 02:21:48 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass1_src6.ximg exists
[Wed Oct 19 02:21:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12931_pi14-548_cl_pass1_src6.csv
[Wed Oct 19 02:21:48 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Oct 19 02:21:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12931_pi14-548_cl_pass1_src6.csv
[Wed Oct 19 02:21:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12931_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12931_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 02:21:48 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Oct 19 02:21:48 2011] fullrun_ccd3_acisf12931_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Oct 19 02:21:48 2011] Fit fullrun_ccd3_acisf12931_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Oct 19 02:21:54 2011] Spatial fit model total counts = 10.043700, observed total counts = 11.000000
[Wed Oct 19 02:21:54 2011] Offset between fit and detection position for source 1 = 0.208302 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.208302 pixels
  Position = (119.7, 643.5) = 17 55 27.53 66 34 8.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 10.0 +/- 3.2
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0002
[Wed Oct 19 02:21:54 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 02:21:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 02:21:54 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 02:21:54 2011] Source does appear to be extended
[Wed Oct 19 02:21:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 02:23:25 2011] Not overwriting source region fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 02:23:25 2011] Extracting stamp from image fullrun_ccd3_acisf12931_pi14-548_cl_sm2.00.img.gz, (96, 620) - (143, 667)
[Wed Oct 19 02:23:25 2011] Writing fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 02:23:36 2011] ../../acisf12931/products/events/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_src.evt and ../../acisf12931/products/events/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 02:23:36 2011] Size of ../../acisf12931/products/events/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_src.evt.gz[events] = 11 counts
[Wed Oct 19 02:23:36 2011] Mean chipx,y = (931.55, 634.18)
[Wed Oct 19 02:23:36 2011] Mean tdetx,y = (4497.82, 3992.55)
[Wed Oct 19 02:23:36 2011] chipx,y range = (913.00-948.00, 618.00-648.00)
[Wed Oct 19 02:23:36 2011] Size of ../../acisf12931/products/events/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2 counts
[Wed Oct 19 02:23:36 2011] ../../acisf12931/products/images/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_src.img and ../../acisf12931/products/images/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 02:23:36 2011] ../../acisf12931/products/spectra/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_src.pi and ../../acisf12931/products/spectra/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 02:23:36 2011] Not generating rmf since there are only 10 counts
[Wed Oct 19 02:23:39 2011] ../../acisf12931/products/lightcurves/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_src.lc and ../../acisf12931/products/lightcurves/fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 02:23:46 2011] 197.218
[Wed Oct 19 02:23:52 2011] Updating aperture counts using extracted products
[Wed Oct 19 02:23:52 2011] Error reading totcts from fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 02:23:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 02:23:52 2011] Using photon index=1.80, rate=0.00074, arf fullrun_ccd3_acisf12931_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 02:23:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 02:23:52 2011] Updating source flux to 8.7e-15
[Wed Oct 19 02:23:57 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting