[Wed Feb 15 02:41:12 2012] Detection parameters:
  Position = (326.7, 563.1) = 17 53 52.55 66 29 13.3
  Extent = 0.5" x 0.5", rotation angle = 71 degrees
  Source counts = 12.6 +/- 3.6
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0002

[Wed Feb 15 02:41:13 2012] Off-axis axis estimate = 4.29'
[Wed Feb 15 03:10:14 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 03:10:14 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Wed Feb 15 03:10:14 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.887
[Wed Feb 15 03:10:14 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.92"
[Wed Feb 15 03:20:02 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass0_src7.ximg exists
[Wed Feb 15 03:20:02 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12927_pi14-548_cl_pass0_src7.csv
[Wed Feb 15 03:20:02 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Feb 15 03:20:02 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12927_pi14-548_cl_pass0_src7.csv
[Wed Feb 15 03:20:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12927_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12927_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:20:02 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Feb 15 03:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12927_pi14-548_cl_pass0_tfrozen_src7.csv
[Wed Feb 15 03:20:02 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Feb 15 03:20:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12927_pi14-548_cl_pass0_tfrozen_src7.csv
[Wed Feb 15 03:20:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12927_pi14-548_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12927_pi14-548_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:31:37 2012] Spatial fit model total counts = 12.726400, observed total counts = 14.000000
[Wed Feb 15 03:31:37 2012] Offset between fit and detection position for source 1 = 0.743020 pixels
[Wed Feb 15 03:31:37 2012] 12.679335 total counts/ 0.214135 bgd. counts: snr = 26.937384
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.743020 pixels
  Position = (327.3, 563.6) = 17 53 52.54 66 29 13.3
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 12.5 +/- 3.6
  Background counts = 0.2
  Rate = 0.0005 +/- 0.0002
[Wed Feb 15 03:31:37 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 03:31:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 03:31:37 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 03:31:37 2012] Source does appear to be extended
[Wed Feb 15 03:31:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 03:53:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 03:53:54 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Wed Feb 15 03:53:54 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.790
[Wed Feb 15 03:53:54 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.58"
[Wed Feb 15 04:03:32 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass1_src7.ximg exists
[Wed Feb 15 04:03:32 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass1_src7_1.ximg exists
[Wed Feb 15 04:03:32 2012] Fit fullrun_ccd3_acisf12927_pi14-548_cl_pass1_src7 appears to have run properly
[Wed Feb 15 04:03:32 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed Feb 15 04:03:32 2012] fullrun_ccd3_acisf12927_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Feb 15 04:03:32 2012] Fit fullrun_ccd3_acisf12927_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Feb 15 04:16:13 2012] Spatial fit model total counts = 14.220300, observed total counts = 14.000000
[Wed Feb 15 04:16:13 2012] Offset between fit and detection position for source 1 = 0.108092 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.108092 pixels
  Position = (327.2, 563.7) = 17 53 52.55 66 29 13.3
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 14.1 +/- 3.8
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Wed Feb 15 04:16:13 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 04:16:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 04:16:13 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 04:16:13 2012] Source does appear to be extended
[Wed Feb 15 04:16:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 04:33:28 2012] Writing source region out to fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1_src.reg
[Wed Feb 15 04:33:28 2012] Extracting stamp from image fullrun_ccd3_acisf12927_pi14-548_cl_sm2.00.img.gz, (301, 538) - (353, 589)
[Wed Feb 15 04:33:28 2012] Writing fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1.gif
[Wed Feb 15 04:36:29 2012] Size of ../../acisf12927/products/events/fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1_src.evt.gz[events] = 13 counts
[Wed Feb 15 04:36:29 2012] Mean chipx,y = (780.38, 533.15)
[Wed Feb 15 04:36:29 2012] Mean tdetx,y = (4598.85, 3841.38)
[Wed Feb 15 04:36:29 2012] chipx,y range = (770.00-803.00, 522.00-552.00)
[Wed Feb 15 04:36:29 2012] Size of ../../acisf12927/products/events/fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6 counts
[Wed Feb 15 04:36:31 2012] Not generating rmf since there are only 14 counts
[Wed Feb 15 04:36:31 2012] arf not found, will run specextract
[Wed Feb 15 04:36:54 2012] ../../acisf12927/products/spectra/fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1.warf not found
[Wed Feb 15 04:36:54 2012] ../../acisf12927/products/spectra/fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1.wrmf not found
[Wed Feb 15 04:36:54 2012] Removal of ../../acisf12927/products/spectra/fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1.soff failed
[Wed Feb 15 04:39:54 2012] Spectrum 1 has only 14 counts, deleting rmf
[Wed Feb 15 04:39:54 2012] 174.155
[Wed Feb 15 04:40:39 2012] Updating aperture counts using extracted products
[Wed Feb 15 04:40:39 2012] Error reading totcts from fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Feb 15 04:40:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 04:40:39 2012] Using photon index=1.80, rate=0.000593, arf fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1.arf
[Wed Feb 15 04:40:39 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 04:40:39 2012] Updating source flux to 7.9e-15
[Wed Feb 15 04:40:49 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 15 04:40:50 2012] acisf12927/analysis//spectral/fullrun_ccd3_acisf12927_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete