[Wed Feb 15 02:41:11 2012] Detection parameters:
  Position = (140.3, 477.8) = 17 54 22.15 66 36 50.3
  Extent = 0.8" x 0.5", rotation angle = 160 degrees
  Source counts = 11.6 +/- 3.5
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0001

[Wed Feb 15 02:41:11 2012] Off-axis axis estimate = 3.93'
[Wed Feb 15 03:02:24 2012] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 03:02:24 2012] Initial guess for spatial extent in simple fitting = 0.81"
[Wed Feb 15 03:02:24 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.871
[Wed Feb 15 03:02:24 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 0.81"
[Wed Feb 15 03:10:14 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass0_src6.ximg exists
[Wed Feb 15 03:10:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12927_pi14-548_cl_pass0_src6.csv
[Wed Feb 15 03:10:14 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Feb 15 03:10:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12927_pi14-548_cl_pass0_src6.csv
[Wed Feb 15 03:10:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12927_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12927_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:10:14 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Feb 15 03:10:14 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Feb 15 03:10:14 2012] Fit fullrun_ccd2_acisf12927_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Feb 15 03:31:36 2012] Spatial fit model total counts = 13.940900, observed total counts = 14.000000
[Wed Feb 15 03:31:36 2012] Offset between fit and detection position for source 5 = 0.476449 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.476449 pixels
  Position = (140.8, 477.7) = 17 54 22.15 66 36 50.0
  Extent = 0.9 (0.7-1.3)", rotation angle = 0
  Source counts = 13.9 +/- 3.7
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Wed Feb 15 03:31:36 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 03:31:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 03:31:36 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 03:31:36 2012] Source does appear to be extended
[Wed Feb 15 03:31:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 03:48:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 03:48:50 2012] Initial guess for spatial extent in simple fitting = 0.93"
[Wed Feb 15 03:48:50 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.091
[Wed Feb 15 03:48:50 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 0.93"
[Wed Feb 15 03:53:54 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass1_src6.ximg exists
[Wed Feb 15 03:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12927_pi14-548_cl_pass1_src6.csv
[Wed Feb 15 03:53:54 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Feb 15 03:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12927_pi14-548_cl_pass1_src6.csv
[Wed Feb 15 03:53:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12927_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12927_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 03:53:54 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Feb 15 03:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12927_pi14-548_cl_pass1_tfrozen_src6.csv
[Wed Feb 15 03:53:54 2012] fullrun_ccd2_acisf12927_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Feb 15 03:53:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12927_pi14-548_cl_pass1_tfrozen_src6.csv
[Wed Feb 15 03:53:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12927_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12927_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 04:16:12 2012] Spatial fit model total counts = 11.655100, observed total counts = 14.000000
[Wed Feb 15 04:16:12 2012] Offset between fit and detection position for source 5 = 0.627734 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.627734 pixels
  Position = (140.8, 478.4) = 17 54 22.15 66 36 50.3
  Extent = 1.1 (0.7-1.9)" x 0.4 (0.3-0.6)", rotation angle = 21 (4-45) degrees
  Source counts = 11.6 +/- 3.4
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed Feb 15 04:16:12 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 04:16:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 04:16:12 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 04:16:12 2012] Source does appear to be extended
[Wed Feb 15 04:16:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Wed Feb 15 04:27:05 2012] Writing source region out to fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5_src.reg
[Wed Feb 15 04:27:05 2012] Extracting stamp from image fullrun_ccd2_acisf12927_pi14-548_cl_sm2.00.img.gz, (92, 429) - (190, 527)
[Wed Feb 15 04:27:05 2012] Writing fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5.gif
[Wed Feb 15 04:30:04 2012] Size of ../../acisf12927/products/events/fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5_src.evt.gz[events] = 12 counts
[Wed Feb 15 04:30:04 2012] Mean chipx,y = (45.25, 551.83)
[Wed Feb 15 04:30:04 2012] Mean tdetx,y = (3612.83, 4040.75)
[Wed Feb 15 04:30:04 2012] chipx,y range = (36.00-59.00, 538.00-569.00)
[Wed Feb 15 04:30:04 2012] Size of ../../acisf12927/products/events/fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 24 counts
[Wed Feb 15 04:30:05 2012] Not generating rmf since there are only 11 counts
[Wed Feb 15 04:30:05 2012] arf not found, will run specextract
[Wed Feb 15 04:30:30 2012] ../../acisf12927/products/spectra/fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5.warf not found
[Wed Feb 15 04:30:30 2012] ../../acisf12927/products/spectra/fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5.wrmf not found
[Wed Feb 15 04:30:30 2012] Removal of ../../acisf12927/products/spectra/fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5.soff failed
[Wed Feb 15 04:33:27 2012] Spectrum 5 has only 12 counts, deleting rmf
[Wed Feb 15 04:33:27 2012] 189.499
[Wed Feb 15 04:40:38 2012] Updating aperture counts using extracted products
[Wed Feb 15 04:40:38 2012] Error reading totcts from fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Feb 15 04:40:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 04:40:39 2012] Using photon index=1.80, rate=0.000488, arf fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5.arf
[Wed Feb 15 04:40:39 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 04:40:39 2012] Updating source flux to 5.9e-15
[Wed Feb 15 04:40:48 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 15 04:40:49 2012] acisf12927/analysis//spectral/fullrun_ccd2_acisf12927_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete