[Fri Sep 23 08:19:37 2011] Detection parameters:
  Position = (447.2, 136.2) = 17 55 17.33 66 32 26.1
  Extent = 0.7" x 0.6", rotation angle = 14 degrees
  Source counts = 502.4 +/- 23.3
  Background counts = 41.6
  Rate = 0.03 +/- 0.001

[Fri Sep 23 08:19:37 2011] Off-axis axis estimate = 9.66'
[Fri Sep 23 08:20:45 2011] Using EEF radius (= 4.13 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 08:20:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 08:20:45 2011] Initial guess for spatial extent in simple fitting = 4.13"
[Fri Sep 23 08:20:45 2011] source mask rpix=8.4, npix_max = 316, mask sum = 306, frac = 0.966
[Fri Sep 23 08:20:45 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.13"
[Fri Sep 23 08:20:46 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 08:20:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12926_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 08:20:46 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 08:20:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12926_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 08:20:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12926_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12926_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 08:20:46 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 08:20:46 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 08:20:46 2011] Fit fullrun_ccd1_acisf12926_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 08:20:55 2011] Spatial fit model total counts = 802.320000, observed total counts = 797.000000
[Fri Sep 23 08:20:55 2011] Offset between fit and detection position for source 13 = 0.923972 pixels
[Fri Sep 23 08:20:55 2011] 802.316700 total counts/ 79.698700 bgd. counts: snr = 80.943719
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.923972 pixels
  Position = (446.3, 136.3) = 17 55 17.45 66 32 25.9
  Extent = 3.1 (3.0-3.3)", rotation angle = 0
  Source counts = 722.6 +/- 28.3
  Background counts = 79.7
  Rate = 0.04 +/- 0.002
[Fri Sep 23 08:20:55 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 08:20:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 08:20:55 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 08:20:55 2011] Source does appear to be extended
[Fri Sep 23 08:20:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 08:21:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 08:21:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 08:21:21 2011] Initial guess for spatial extent in simple fitting = 3.14"
[Fri Sep 23 08:21:21 2011] source mask rpix=6.4, npix_max = 189, mask sum = 182, frac = 0.958
[Fri Sep 23 08:21:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.14"
[Fri Sep 23 08:21:22 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 08:21:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12926_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 08:21:22 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 08:21:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12926_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 08:21:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12926_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12926_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 08:21:22 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 08:21:22 2011] fullrun_ccd1_acisf12926_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 08:21:22 2011] Fit fullrun_ccd1_acisf12926_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 08:21:32 2011] Spatial fit model total counts = 782.592000, observed total counts = 777.000000
[Fri Sep 23 08:21:32 2011] Offset between fit and detection position for source 13 = 0.156214 pixels
[Fri Sep 23 08:21:32 2011] 782.530000 total counts/ 100.909000 bgd. counts: snr = 67.854399
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.156214 pixels
  Position = (446.1, 136.4) = 17 55 17.46 66 32 25.9
  Extent = 2.9 (2.7-3.1)", rotation angle = 0
  Source counts = 681.6 +/- 28.0
  Background counts = 100.9
  Rate = 0.04 +/- 0.002
[Fri Sep 23 08:21:32 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 08:21:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 08:21:32 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 08:21:32 2011] Source does appear to be extended
[Fri Sep 23 08:21:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 08:24:02 2011] Not overwriting source region fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_src.reg
[Fri Sep 23 08:24:02 2011] Extracting stamp from image fullrun_ccd1_acisf12926_pi14-548_cl_sm2.00.img.gz, (312, 3) - (580, 270)
[Fri Sep 23 08:24:02 2011] Writing fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13.gif
[Fri Sep 23 08:24:05 2011] ../../acisf12926/products/events/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_src.evt and ../../acisf12926/products/events/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_bgd.evt exist, delete to re-create
[Fri Sep 23 08:24:05 2011] Size of ../../acisf12926/products/events/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_src.evt.gz[events] = 758 counts
[Fri Sep 23 08:24:05 2011] Mean chipx,y = (580.49, 59.85)
[Fri Sep 23 08:24:05 2011] Mean tdetx,y = (5072.15, 4687.49)
[Fri Sep 23 08:24:05 2011] chipx,y range = (543.00-620.00, 25.00-96.00)
[Fri Sep 23 08:24:05 2011] Size of ../../acisf12926/products/events/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 79 counts
[Fri Sep 23 08:24:05 2011] ../../acisf12926/products/images/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_src.img and ../../acisf12926/products/images/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_bgd.img exist, delete to re-create
[Fri Sep 23 08:24:05 2011] rmf not found, will run specextract
[Fri Sep 23 08:24:05 2011] arf not found, will run specextract
[Fri Sep 23 08:24:18 2011] ../../acisf12926/products/spectra/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13.warf not found
[Fri Sep 23 08:24:18 2011] ../../acisf12926/products/spectra/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13.wrmf not found
[Fri Sep 23 08:24:18 2011] Removal of ../../acisf12926/products/spectra/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13.soff failed
[Fri Sep 23 08:24:26 2011] ../../acisf12926/products/lightcurves/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_src.lc and ../../acisf12926/products/lightcurves/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_bgd.lc exist, delete to re-create
[Fri Sep 23 08:29:29 2011] Keeping rmf generated by specextract
[Fri Sep 23 08:29:29 2011] 162.373
[Fri Sep 23 08:43:47 2011] Updating aperture counts using extracted products
[Fri Sep 23 08:43:47 2011] Error reading totcts from fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_src.pi.gz
[Fri Sep 23 08:43:47 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 08:43:47 2011] Using photon index=1.80, rate=0.0382, arf fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13.arf
[Fri Sep 23 08:43:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 08:43:47 2011] Updating source flux to 5.6e-13
[Fri Sep 23 08:43:54 2011] Reading fit data from acisf12926/analysis//spectral/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_pl.csv
[Fri Sep 23 08:43:54 2011] Spectral fit parameter nH value = 7.35945e+18
[Fri Sep 23 08:43:54 2011] Spectral fit parameter PhoIndex value = 2.0707
[Fri Sep 23 08:43:54 2011] Failed to get F(0.3-8.0) from acisf12926/analysis//spectral/fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 08:43:54 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 08:43:54 2011] Using Nh = 7.4e+18, photon index=2.07, rate=0.0382, arf fullrun_ccd1_acisf12926_pi14-548_pass1_cl_src13.arf
[Fri Sep 23 08:43:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 08:43:54 2011] Updating source flux to 5.9e-13