[Tue Jan 31 02:05:30 2012] Detection parameters:
  Position = (1152.0, 756.9) = 5 17 10.33 -51 57 25.6
  Extent = 0.8" x 0.5", rotation angle = 32 degrees
  Source counts = 10.5 +/- 3.3
  Background counts = 0.5
  Rate = 0.0005 +/- 0.0002

[Tue Jan 31 02:05:30 2012] Off-axis axis estimate = 2.74'
[Tue Jan 31 02:43:47 2012] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Tue Jan 31 02:43:47 2012] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Jan 31 02:43:47 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.199
[Tue Jan 31 02:43:47 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.53"
[Tue Jan 31 02:50:13 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass0_src5.ximg exists
[Tue Jan 31 02:50:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12924_pi14-548_cl_pass0_src5.csv
[Tue Jan 31 02:50:13 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Jan 31 02:50:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12924_pi14-548_cl_pass0_src5.csv
[Tue Jan 31 02:50:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12924_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12924_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 02:50:13 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Jan 31 02:50:13 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jan 31 02:50:13 2012] Fit fullrun_ccd6_acisf12924_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jan 31 02:59:03 2012] Spatial fit model total counts = 11.939500, observed total counts = 11.000000
[Tue Jan 31 02:59:03 2012] Offset between fit and detection position for source 4 = 0.818884 pixels
[Tue Jan 31 02:59:03 2012] 11.972600 total counts/ 0.000000 bgd. counts: snr = 158194135826.029358
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.818884 pixels
  Position = (1152.6, 757.4) = 5 17 10.32 -51 57 25.6
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Tue Jan 31 02:59:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 02:59:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 02:59:03 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 02:59:03 2012] Source does appear to be extended
[Tue Jan 31 02:59:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 03:12:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 31 03:12:36 2012] Initial guess for spatial extent in simple fitting = 0.81"
[Tue Jan 31 03:12:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 25, frac = 1.351
[Tue Jan 31 03:12:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.81"
[Tue Jan 31 03:20:12 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass1_src5.ximg exists
[Tue Jan 31 03:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12924_pi14-548_cl_pass1_src5.csv
[Tue Jan 31 03:20:12 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Jan 31 03:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12924_pi14-548_cl_pass1_src5.csv
[Tue Jan 31 03:20:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12924_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12924_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 31 03:20:12 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Jan 31 03:20:12 2012] fullrun_ccd6_acisf12924_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jan 31 03:20:12 2012] Fit fullrun_ccd6_acisf12924_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jan 31 03:28:15 2012] Spatial fit model total counts = 11.492000, observed total counts = 11.000000
[Tue Jan 31 03:28:15 2012] Offset between fit and detection position for source 4 = 0.160968 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.160968 pixels
  Position = (1152.4, 757.4) = 5 17 10.33 -51 57 25.6
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0002
[Tue Jan 31 03:28:15 2012] Vigneting correction estimate = 1.000000
[Tue Jan 31 03:28:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 31 03:28:15 2012] Assessing source extent using major axis lower bound
[Tue Jan 31 03:28:15 2012] Source does appear to be extended
[Tue Jan 31 03:28:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 31 03:30:27 2012] Writing source region out to fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4_src.reg
[Tue Jan 31 03:30:27 2012] Extracting stamp from image fullrun_ccd6_acisf12924_pi14-548_cl_sm2.00.img.gz, (1114, 719) - (1191, 796)
[Tue Jan 31 03:30:27 2012] Writing fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4.gif
[Tue Jan 31 03:32:22 2012] Size of ../../acisf12924/products/events/fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4_src.evt.gz[events] = 11 counts
[Tue Jan 31 03:32:22 2012] Mean chipx,y = (1001.91, 254.27)
[Tue Jan 31 03:32:22 2012] Mean tdetx,y = (3876.91, 1956.27)
[Tue Jan 31 03:32:22 2012] chipx,y range = (989.00-1019.00, 237.00-266.00)
[Tue Jan 31 03:32:22 2012] Size of ../../acisf12924/products/events/fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 13 counts
[Tue Jan 31 03:32:23 2012] Not generating rmf since there are only 11 counts
[Tue Jan 31 03:32:23 2012] arf not found, will run specextract
[Tue Jan 31 03:32:44 2012] ../../acisf12924/products/spectra/fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4.warf not found
[Tue Jan 31 03:32:44 2012] ../../acisf12924/products/spectra/fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4.wrmf not found
[Tue Jan 31 03:32:44 2012] Removal of ../../acisf12924/products/spectra/fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4.soff failed
[Tue Jan 31 03:36:42 2012] Spectrum 4 has only 12 counts, deleting rmf
[Tue Jan 31 03:36:42 2012] 163.567
[Tue Jan 31 03:39:46 2012] Updating aperture counts using extracted products
[Tue Jan 31 03:39:46 2012] Error reading totcts from fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Jan 31 03:39:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 31 03:39:46 2012] Using photon index=1.80, rate=0.000582, arf fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4.arf
[Tue Jan 31 03:39:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 31 03:39:46 2012] Updating source flux to 8e-15
[Tue Jan 31 03:39:51 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 31 03:39:52 2012] acisf12924/analysis//spectral/fullrun_ccd6_acisf12924_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete