[Sat Feb 11 10:40:01 2012] Detection parameters:
  Position = (770.8, 171.5) = 9 16 0.32 29 54 51.1
  Extent = 0.6" x 0.5", rotation angle = 72 degrees
  Source counts = 10.3 +/- 3.3
  Background counts = 0.7
  Rate = 0.0003 +/- 9e-05

[Sat Feb 11 10:40:01 2012] Off-axis axis estimate = 3.24'
[Sat Feb 11 11:36:08 2012] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 11:36:08 2012] Initial guess for spatial extent in simple fitting = 0.63"
[Sat Feb 11 11:36:08 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.944
[Sat Feb 11 11:36:08 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 0.63"
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src14.ximg exists
[Sat Feb 11 11:51:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src14.csv
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src14_1.ximg exists
[Sat Feb 11 11:51:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src14.csv
[Sat Feb 11 11:51:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Feb 11 11:51:15 2012] Fit fullrun_ccd2_acisf12913_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Feb 11 13:17:10 2012] Spatial fit model total counts = 12.383900, observed total counts = 13.000000
[Sat Feb 11 13:17:10 2012] Offset between fit and detection position for source 15 = 0.732576 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.732576 pixels
  Position = (771.3, 172.0) = 9 16 0.32 29 54 51.1
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 11.8 +/- 3.4
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Sat Feb 11 13:17:10 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 13:17:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 13:17:10 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 13:17:10 2012] Source does appear to be extended
[Sat Feb 11 13:17:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 14:02:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 14:02:04 2012] Initial guess for spatial extent in simple fitting = 0.79"
[Sat Feb 11 14:02:04 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Sat Feb 11 14:02:04 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 0.79"
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src14.ximg exists
[Sat Feb 11 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src14.csv
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src14_1.ximg exists
[Sat Feb 11 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src14.csv
[Sat Feb 11 14:19:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Feb 11 14:19:14 2012] Fit fullrun_ccd2_acisf12913_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Sat Feb 11 15:28:28 2012] Spatial fit model total counts = 12.617200, observed total counts = 13.000000
[Sat Feb 11 15:28:28 2012] Offset between fit and detection position for source 15 = 0.066349 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.066349 pixels
  Position = (771.2, 172.0) = 9 16 0.32 29 54 51.1
  Extent = 0.7 (0.6-1.0)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0003 +/- 9e-05
[Sat Feb 11 15:28:28 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 15:28:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 15:28:28 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 15:28:28 2012] Source does appear to be extended
[Sat Feb 11 15:28:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 15:38:29 2012] Writing source region out to fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15_src.reg
[Sat Feb 11 15:38:29 2012] Extracting stamp from image fullrun_ccd2_acisf12913_pi14-548_cl_sm2.00.img.gz, (738, 138) - (805, 206)
[Sat Feb 11 15:38:29 2012] Writing fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15.gif
[Sat Feb 11 15:45:57 2012] Size of ../../acisf12913/products/events/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15_src.evt.gz[events] = 12 counts
[Sat Feb 11 15:45:57 2012] Mean chipx,y = (755.58, 870.50)
[Sat Feb 11 15:45:57 2012] Mean tdetx,y = (3931.50, 3330.42)
[Sat Feb 11 15:45:57 2012] chipx,y range = (742.00-775.00, 859.00-888.00)
[Sat Feb 11 15:45:57 2012] Size of ../../acisf12913/products/events/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 6 counts
[Sat Feb 11 15:45:58 2012] Not generating rmf since there are only 12 counts
[Sat Feb 11 15:45:58 2012] arf not found, will run specextract
[Sat Feb 11 15:46:35 2012] ../../acisf12913/products/spectra/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15.warf not found
[Sat Feb 11 15:46:35 2012] ../../acisf12913/products/spectra/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15.wrmf not found
[Sat Feb 11 15:46:35 2012] Removal of ../../acisf12913/products/spectra/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15.soff failed
[Sat Feb 11 15:50:03 2012] Spectrum 15 has only 12 counts, deleting rmf
[Sat Feb 11 15:50:03 2012] 178.997
[Sat Feb 11 16:11:12 2012] Updating aperture counts using extracted products
[Sat Feb 11 16:11:12 2012] Error reading totcts from fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15_src.pi.gz
[Sat Feb 11 16:11:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 16:11:12 2012] Using photon index=1.80, rate=0.000311, arf fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src15.arf
[Sat Feb 11 16:11:12 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 16:11:12 2012] Updating source flux to 4.2e-15
[Sat Feb 11 16:11:21 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting