[Sat Feb 11 10:40:01 2012] Detection parameters:
  Position = (141.0, 168.4) = 9 16 24.15 29 54 49.6
  Extent = 0.5" x 0.5", rotation angle = 119 degrees
  Source counts = 12.7 +/- 3.6
  Background counts = 0.3
  Rate = 0.0003 +/- 9e-05

[Sat Feb 11 10:40:01 2012] Off-axis axis estimate = 2.44'
[Sat Feb 11 11:36:08 2012] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 11:36:08 2012] Initial guess for spatial extent in simple fitting = 0.48"
[Sat Feb 11 11:36:08 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.682
[Sat Feb 11 11:36:08 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 0.48"
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src13.ximg exists
[Sat Feb 11 11:51:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src13.csv
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Feb 11 11:51:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src13.csv
[Sat Feb 11 11:51:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12913_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Feb 11 11:51:15 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Feb 11 11:51:15 2012] Fit fullrun_ccd2_acisf12913_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Feb 11 13:17:10 2012] Spatial fit model total counts = 24.461600, observed total counts = 24.000000
[Sat Feb 11 13:17:10 2012] Offset between fit and detection position for source 12 = 0.695881 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.695881 pixels
  Position = (140.5, 168.9) = 9 16 24.19 29 54 49.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 24.5 +/- 4.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Feb 11 13:17:10 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 13:17:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 13:17:10 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 13:17:10 2012] Source does appear to be extended
[Sat Feb 11 13:17:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 14:02:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 14:02:04 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Sat Feb 11 14:02:04 2012] source mask rpix=1.2, npix_max = 11, mask sum = 8, frac = 0.709
[Sat Feb 11 14:02:04 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 0.58"
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src13.ximg exists
[Sat Feb 11 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src13.csv
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Feb 11 14:19:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src13.csv
[Sat Feb 11 14:19:14 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12913_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Feb 11 14:19:14 2012] fullrun_ccd2_acisf12913_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Feb 11 14:19:14 2012] Fit fullrun_ccd2_acisf12913_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Feb 11 15:28:28 2012] Spatial fit model total counts = 23.549700, observed total counts = 24.000000
[Sat Feb 11 15:28:28 2012] Offset between fit and detection position for source 12 = 0.098688 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.098688 pixels
  Position = (140.5, 168.9) = 9 16 24.19 29 54 49.6
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 23.5 +/- 4.9
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Feb 11 15:28:28 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 15:28:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 15:28:28 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 15:28:28 2012] Source does appear to be extended
[Sat Feb 11 15:28:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 15:38:29 2012] Writing source region out to fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12_src.reg
[Sat Feb 11 15:38:29 2012] Extracting stamp from image fullrun_ccd2_acisf12913_pi14-548_cl_sm2.00.img.gz, (113, 141) - (168, 196)
[Sat Feb 11 15:38:29 2012] Writing fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12.gif
[Sat Feb 11 15:45:12 2012] Size of ../../acisf12913/products/events/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12_src.evt.gz[events] = 24 counts
[Sat Feb 11 15:45:12 2012] Mean chipx,y = (126.38, 915.92)
[Sat Feb 11 15:45:12 2012] Mean tdetx,y = (3976.92, 3959.62)
[Sat Feb 11 15:45:12 2012] chipx,y range = (109.00-145.00, 901.00-937.00)
[Sat Feb 11 15:45:12 2012] Size of ../../acisf12913/products/events/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 8 counts
[Sat Feb 11 15:45:13 2012] Not generating rmf since there are only 23 counts
[Sat Feb 11 15:45:13 2012] arf not found, will run specextract
[Sat Feb 11 15:45:49 2012] ../../acisf12913/products/spectra/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12.warf not found
[Sat Feb 11 15:45:49 2012] ../../acisf12913/products/spectra/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12.wrmf not found
[Sat Feb 11 15:45:49 2012] Removal of ../../acisf12913/products/spectra/fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12.soff failed
[Sat Feb 11 15:50:03 2012] Spectrum 12 has only 24 counts, deleting rmf
[Sat Feb 11 15:50:03 2012] 183.85
[Sat Feb 11 16:11:12 2012] Updating aperture counts using extracted products
[Sat Feb 11 16:11:12 2012] Error reading totcts from fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12_src.pi.gz
[Sat Feb 11 16:11:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 16:11:12 2012] Using photon index=1.80, rate=0.000611, arf fullrun_ccd2_acisf12913_pi14-548_pass1_cl_src12.arf
[Sat Feb 11 16:11:12 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 11 16:11:12 2012] Updating source flux to 7.7e-15
[Sat Feb 11 16:11:21 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting