[Fri May 10 09:25:03 2013] Detection parameters:
  Position = (536.8, 994.9) = 14 14 22.44 -0 25 17.0
  Extent = 0.5" x 0.5", rotation angle = 4 degrees
  Source counts = 17.7 +/- 4.2
  Background counts = 0.3
  Rate = 0.001 +/- 0.0003

[Fri May 10 09:25:03 2013] Off-axis axis estimate = 2.62'
[Fri May 10 09:53:20 2013] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Fri May 10 09:53:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 09:53:20 2013] Initial guess for spatial extent in simple fitting = 0.51"
[Fri May 10 09:53:20 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.952
[Fri May 10 09:53:20 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.51"
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src1.ximg exists
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src1_1.ximg exists
[Fri May 10 09:59:02 2013] Fit fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src1 appears to have run properly
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri May 10 09:59:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May 10 09:59:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri May 10 09:59:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 10:01:09 2013] Spatial fit model total counts = 16.853100, observed total counts = 18.000000
[Fri May 10 10:01:09 2013] Offset between fit and detection position for source 6 = 0.702847 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.702847 pixels
  Position = (537.3, 995.4) = 14 14 22.45 -0 25 17.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 16.9 +/- 4.1
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri May 10 10:01:09 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:01:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:01:09 2013] Assessing source extent using major axis lower bound
[Fri May 10 10:01:09 2013] Source does appear to be extended
[Fri May 10 10:01:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 10:27:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 10:27:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 10:27:38 2013] Initial guess for spatial extent in simple fitting = 0.55"
[Fri May 10 10:27:38 2013] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.868
[Fri May 10 10:27:38 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.55"
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src1.ximg exists
[Fri May 10 10:33:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src1.csv
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src1_1.ximg exists
[Fri May 10 10:33:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src1.csv
[Fri May 10 10:33:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri May 10 10:33:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May 10 10:33:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri May 10 10:33:07 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 10:35:14 2013] Spatial fit model total counts = 17.274000, observed total counts = 19.000000
[Fri May 10 10:35:14 2013] Offset between fit and detection position for source 6 = 0.019709 pixels
[Fri May 10 10:35:14 2013] 17.531200 total counts/ 0.000000 bgd. counts: snr = 111285544213918.625000
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.019709 pixels
  Position = (537.3, 995.4) = 14 14 22.45 -0 25 17.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 17.5 +/- 4.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri May 10 10:35:14 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:35:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:35:14 2013] Assessing source extent using major axis lower bound
[Fri May 10 10:35:14 2013] Source does appear to be extended
[Fri May 10 10:35:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 10:37:44 2013] Writing source region out to fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6_src.reg
[Fri May 10 10:37:44 2013] Extracting stamp from image fullrun_ccd6_acisf12909_pi14-548_cl_sm2.00.img.gz, (515, 973) - (560, 1018)
[Fri May 10 10:37:44 2013] Writing fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6.gif
[Fri May 10 10:37:45 2013] Size of ../../acisf12909/products/events/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6_src.evt.gz[events] = 18 counts
[Fri May 10 10:37:45 2013] Mean chipx,y = (920.72, 530.39)
[Fri May 10 10:37:45 2013] Mean tdetx,y = (3795.72, 2232.39)
[Fri May 10 10:37:45 2013] chipx,y range = (903.00-937.00, 513.00-547.00)
[Fri May 10 10:37:45 2013] Size of ../../acisf12909/products/events/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 2 counts
[Fri May 10 10:37:47 2013] Not generating rmf since there are only 17 counts
[Fri May 10 10:37:47 2013] arf not found, will run specextract
[Fri May 10 10:38:13 2013] ../../acisf12909/products/spectra/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6.warf not found
[Fri May 10 10:38:13 2013] ../../acisf12909/products/spectra/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6.wrmf not found
[Fri May 10 10:38:13 2013] Removal of ../../acisf12909/products/spectra/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6.soff failed
[Fri May 10 10:41:03 2013] Spectrum 6 has only 18 counts, deleting rmf
[Fri May 10 10:41:03 2013] 206.194
[Fri May 10 10:41:39 2013] Updating aperture counts using extracted products
[Fri May 10 10:41:39 2013] Total counts from fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6_src.pi.gz = 18.00
[Fri May 10 10:41:39 2013] Total counts from fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6_bgd.pi.gz = 2.00
[Fri May 10 10:41:39 2013] Got source and background scale factors 0.000001, 0.000009
[Fri May 10 10:41:39 2013] User source parameters:
  Position = (537.3, 995.4) = 14 14 22.45 -0 25 17.0
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source aperture counts = 17.8 +/- 5.3
  Background aperture counts = 0.2
  Rate = 0.001 +/- 0.0004

[Fri May 10 10:41:40 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 10:41:40 2013] Using photon index=1.80, rate=0.00133, arf fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6.arf
[Fri May 10 10:41:40 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 10:41:40 2013] Updating source flux to 1.4e-14
[Fri May 10 10:41:47 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 10 10:41:48 2013] acisf12909/analysis//spectral/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete