[Fri May 10 09:25:02 2013] Detection parameters:
  Position = (145.9, 863.3) = 14 14 35.27 -0 26 21.7
  Extent = 0.8" x 0.6", rotation angle = 111 degrees
  Source counts = 17.5 +/- 4.2
  Background counts = 0.5
  Rate = 0.001 +/- 0.0003

[Fri May 10 09:25:03 2013] Off-axis axis estimate = 4.43'
[Fri May 10 09:53:20 2013] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Fri May 10 09:53:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 09:53:20 2013] Initial guess for spatial extent in simple fitting = 0.97"
[Fri May 10 09:53:20 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Fri May 10 09:53:20 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.97"
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src2.ximg exists
[Fri May 10 09:59:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src2.csv
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src2_1.ximg exists
[Fri May 10 09:59:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src2.csv
[Fri May 10 09:59:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12909_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri May 10 09:59:02 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May 10 09:59:02 2013] Fit fullrun_ccd6_acisf12909_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri May 10 10:01:09 2013] Spatial fit model total counts = 17.113600, observed total counts = 18.000000
[Fri May 10 10:01:09 2013] Offset between fit and detection position for source 2 = 0.607580 pixels
[Fri May 10 10:01:09 2013] 17.229300 total counts/ 0.000000 bgd. counts: snr = 267665791649379.125000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.607580 pixels
  Position = (146.3, 863.7) = 14 14 35.27 -0 26 21.8
  Extent = 1.0 (0.7-1.2)", rotation angle = 0
  Source counts = 17.2 +/- 4.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri May 10 10:01:09 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:01:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:01:09 2013] Assessing source extent using major axis lower bound
[Fri May 10 10:01:09 2013] Source does appear to be extended
[Fri May 10 10:01:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 10:27:38 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 10:27:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 10:27:38 2013] Initial guess for spatial extent in simple fitting = 0.95"
[Fri May 10 10:27:38 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Fri May 10 10:27:38 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.95"
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src2.ximg exists
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src2_1.ximg exists
[Fri May 10 10:33:07 2013] Fit fullrun_ccd6_acisf12909_pi14-548_cl_pass1_src2 appears to have run properly
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri May 10 10:33:07 2013] fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 10 10:33:07 2013] Fit fullrun_ccd6_acisf12909_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May 10 10:35:14 2013] Spatial fit model total counts = 18.407100, observed total counts = 18.000000
[Fri May 10 10:35:14 2013] Offset between fit and detection position for source 2 = 0.064145 pixels
[Fri May 10 10:35:14 2013] 18.513800 total counts/ 0.000000 bgd. counts: snr = 303347211955346.500000
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.064145 pixels
  Position = (146.4, 863.7) = 14 14 35.27 -0 26 21.8
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 18.5 +/- 4.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Fri May 10 10:35:14 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:35:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:35:14 2013] Assessing source extent using major axis lower bound
[Fri May 10 10:35:14 2013] Source does appear to be extended
[Fri May 10 10:35:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 10:37:44 2013] Writing source region out to fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2_src.reg
[Fri May 10 10:37:44 2013] Extracting stamp from image fullrun_ccd6_acisf12909_pi14-548_cl_sm2.00.img.gz, (104, 821) - (189, 906)
[Fri May 10 10:37:44 2013] Writing fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2.gif
[Fri May 10 10:38:21 2013] Size of ../../acisf12909/products/events/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2_src.evt.gz[events] = 18 counts
[Fri May 10 10:38:21 2013] Mean chipx,y = (851.50, 123.44)
[Fri May 10 10:38:21 2013] Mean tdetx,y = (3726.50, 1825.44)
[Fri May 10 10:38:21 2013] chipx,y range = (833.00-869.00, 106.00-142.00)
[Fri May 10 10:38:21 2013] Size of ../../acisf12909/products/events/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 14 counts
[Fri May 10 10:38:22 2013] Not generating rmf since there are only 18 counts
[Fri May 10 10:38:22 2013] arf not found, will run specextract
[Fri May 10 10:38:43 2013] ../../acisf12909/products/spectra/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2.warf not found
[Fri May 10 10:38:43 2013] ../../acisf12909/products/spectra/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2.wrmf not found
[Fri May 10 10:38:43 2013] Removal of ../../acisf12909/products/spectra/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2.soff failed
[Fri May 10 10:41:03 2013] Spectrum 2 has only 19 counts, deleting rmf
[Fri May 10 10:41:03 2013] 194.906
[Fri May 10 10:41:39 2013] Updating aperture counts using extracted products
[Fri May 10 10:41:39 2013] Total counts from fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2_src.pi.gz = 18.00
[Fri May 10 10:41:39 2013] Total counts from fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2_bgd.pi.gz = 14.00
[Fri May 10 10:41:39 2013] Got source and background scale factors 0.000003, 0.000032
[Fri May 10 10:41:39 2013] User source parameters:
  Position = (146.4, 863.7) = 14 14 35.27 -0 26 21.8
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source aperture counts = 16.8 +/- 5.3
  Background aperture counts = 1.2
  Rate = 0.001 +/- 0.0004

[Fri May 10 10:41:40 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 10:41:40 2013] Using photon index=1.80, rate=0.0014, arf fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2.arf
[Fri May 10 10:41:40 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 10:41:40 2013] Updating source flux to 1.6e-14
[Fri May 10 10:41:47 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 10 10:41:48 2013] acisf12909/analysis//spectral/fullrun_ccd6_acisf12909_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete