[Wed Mar 28 15:53:58 2012] Detection parameters:
  Position = (574.2, 263.5) = 14 15 8.26 -0 25 49.3
  Extent = 0.9" x 0.5", rotation angle = 133 degrees
  Source counts = 242.5 +/- 15.7
  Background counts = 3.5
  Rate = 0.007 +/- 0.0005

[Wed Mar 28 15:53:59 2012] Off-axis axis estimate = 3.42'
[Wed Mar 28 16:10:18 2012] Using EEF radius (= 0.67 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 16:10:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 16:10:18 2012] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Mar 28 16:10:18 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.861
[Wed Mar 28 16:10:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.67"
[Wed Mar 28 16:31:51 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass0_src1.ximg exists
[Wed Mar 28 16:31:51 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Mar 28 16:31:51 2012] Fit fullrun_ccd6_acisf12904_pi14-548_cl_pass0_src1 appears to have run properly
[Wed Mar 28 16:31:51 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar 28 16:31:51 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar 28 16:31:51 2012] Fit fullrun_ccd6_acisf12904_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar 28 16:48:34 2012] Spatial fit model total counts = 243.683000, observed total counts = 245.000000
[Wed Mar 28 16:48:34 2012] Offset between fit and detection position for source 1 = 0.663463 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.663463 pixels
  Position = (574.7, 263.9) = 14 15 8.26 -0 25 49.3
  Extent = 1.0 (0.9-1.0)", rotation angle = 0
  Source counts = 243.9 +/- 15.6
  Background counts = 0.0
  Rate = 0.007 +/- 0.0005
[Wed Mar 28 16:48:34 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 16:48:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 16:48:34 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 16:48:34 2012] Source does appear to be extended
[Wed Mar 28 16:48:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 17:02:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 17:02:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Mar 28 17:02:01 2012] Initial guess for spatial extent in simple fitting = 0.96"
[Wed Mar 28 17:02:01 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Wed Mar 28 17:02:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.96"
[Wed Mar 28 17:20:50 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass1_src1.ximg exists
[Wed Mar 28 17:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12904_pi14-548_cl_pass1_src1.csv
[Wed Mar 28 17:20:50 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Mar 28 17:20:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12904_pi14-548_cl_pass1_src1.csv
[Wed Mar 28 17:20:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12904_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12904_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 17:20:50 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar 28 17:20:50 2012] fullrun_ccd6_acisf12904_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar 28 17:20:50 2012] Fit fullrun_ccd6_acisf12904_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar 28 17:35:07 2012] Warning, spatial fit 1 centroid is now closest to src. 9
[Wed Mar 28 17:35:07 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 17:35:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 17:35:07 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 17:35:07 2012] Source does appear to be extended
[Wed Mar 28 17:35:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 17:39:33 2012] Writing source region out to fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1_src.reg
[Wed Mar 28 17:39:33 2012] Extracting stamp from image fullrun_ccd6_acisf12904_pi14-548_cl_sm2.00.img.gz, (531, 220) - (619, 308)
[Wed Mar 28 17:39:33 2012] Writing fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1.gif
[Wed Mar 28 17:39:35 2012] Size of ../../acisf12904/products/events/fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1_src.evt.gz[events] = 245 counts
[Wed Mar 28 17:39:35 2012] Mean chipx,y = (816.26, 527.24)
[Wed Mar 28 17:39:35 2012] Mean tdetx,y = (3691.26, 2229.24)
[Wed Mar 28 17:39:35 2012] chipx,y range = (798.00-835.00, 507.00-548.00)
[Wed Mar 28 17:39:35 2012] Size of ../../acisf12904/products/events/fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 24 counts
[Wed Mar 28 17:39:36 2012] rmf not found, will run specextract
[Wed Mar 28 17:39:36 2012] arf not found, will run specextract
[Wed Mar 28 17:40:02 2012] ../../acisf12904/products/spectra/fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1.warf not found
[Wed Mar 28 17:40:02 2012] ../../acisf12904/products/spectra/fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1.wrmf not found
[Wed Mar 28 17:40:02 2012] Removal of ../../acisf12904/products/spectra/fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1.soff failed
[Wed Mar 28 17:46:56 2012] Keeping rmf generated by specextract
[Wed Mar 28 17:46:56 2012] 201.517
[Wed Mar 28 17:52:55 2012] Updating aperture counts using extracted products
[Wed Mar 28 17:52:55 2012] Error reading totcts from fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Mar 28 17:52:55 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 17:52:55 2012] Using photon index=1.80, rate=0.0074, arf fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1.arf
[Wed Mar 28 17:52:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Mar 28 17:52:55 2012] Updating source flux to 8.1e-14
[Wed Mar 28 17:53:12 2012] Reading fit data from acisf12904/analysis//spectral/fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1_pl.csv
[Wed Mar 28 17:53:12 2012] Spectral fit parameter nH value = 1.46252e+21
[Wed Mar 28 17:53:12 2012] Spectral fit parameter PhoIndex value = 2.11171
[Wed Mar 28 17:53:12 2012] Failed to get F(0.3-8.0) from acisf12904/analysis//spectral/fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar 28 17:53:12 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 28 17:53:12 2012] Using Nh = 1.5e+21, photon index=2.11, rate=0.0074, arf fullrun_ccd6_acisf12904_pi14-548_pass1_cl_src1.arf
[Wed Mar 28 17:53:12 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Mar 28 17:53:12 2012] Updating source flux to 7.1e-14