[Wed Feb 22 00:55:40 2012] Detection parameters:
  Position = (404.5, 941.8) = 9 52 19.00 51 57 58.4
  Extent = 0.5" x 0.5", rotation angle = 64 degrees
  Source counts = 167.3 +/- 13.3
  Background counts = 8.7
  Rate = 0.002 +/- 0.0001

[Wed Feb 22 00:55:41 2012] Off-axis axis estimate = 5.58'
[Wed Feb 22 02:48:01 2012] Using EEF radius (= 1.43 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 02:48:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 02:48:01 2012] Initial guess for spatial extent in simple fitting = 1.43"
[Wed Feb 22 02:48:01 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Wed Feb 22 02:48:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.43"
[Wed Feb 22 03:13:05 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 22 03:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12903_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 03:13:05 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 22 03:13:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12903_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 03:13:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12903_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12903_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 03:13:05 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 22 03:13:05 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 22 03:13:05 2012] Fit fullrun_ccd6_acisf12903_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 22 03:54:41 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.778959 pixels away
[Wed Feb 22 03:54:41 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 03:54:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 03:54:41 2012] Assessing source extent using major
[Wed Feb 22 03:54:41 2012] Source does appear to be extended
[Wed Feb 22 03:54:41 2012] Computing asymmetry using major and minor axis, asym = 1.08
[Wed Feb 22 05:35:44 2012] Using EEF radius (= 1.43 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 05:35:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 05:35:44 2012] Initial guess for spatial extent in simple fitting = 1.43"
[Wed Feb 22 05:35:44 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Wed Feb 22 05:35:44 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.43"
[Wed Feb 22 06:06:20 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 22 06:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12903_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 06:06:20 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 22 06:06:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12903_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 06:06:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12903_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12903_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 06:06:20 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 22 06:06:20 2012] fullrun_ccd6_acisf12903_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 22 06:06:20 2012] Fit fullrun_ccd6_acisf12903_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 22 06:33:46 2012] Spatial fit model total counts = 320.587000, observed total counts = 321.000000
[Wed Feb 22 06:33:46 2012] Offset between fit and detection position for source 3 = 3.303632 pixels
[Wed Feb 22 06:33:46 2012] 318.898180 total counts/ 4.889180 bgd. counts: snr = 142.011686
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.303632 pixels
  Position = (405.8, 944.9) = 9 52 18.96 51 57 59.6
  Extent = 2.0 (1.8-2.2)", rotation angle = 0
  Source counts = 314.0 +/- 17.9
  Background counts = 4.9
  Rate = 0.003 +/- 0.0002
[Wed Feb 22 06:33:46 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 06:33:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 06:33:46 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 06:33:46 2012] Source does appear to be extended
[Wed Feb 22 06:33:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 06:45:23 2012] Writing source region out to fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3_src.reg
[Wed Feb 22 06:45:23 2012] Extracting stamp from image fullrun_ccd6_acisf12903_pi14-548_cl_sm2.00.img.gz, (315, 854) - (497, 1036)
[Wed Feb 22 06:45:23 2012] Writing fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3.gif
[Wed Feb 22 06:45:25 2012] Size of ../../acisf12903/products/events/fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3_src.evt.gz[events] = 327 counts
[Wed Feb 22 06:45:25 2012] Mean chipx,y = (646.99, 866.45)
[Wed Feb 22 06:45:25 2012] Mean tdetx,y = (3521.99, 2568.45)
[Wed Feb 22 06:45:25 2012] chipx,y range = (622.00-675.00, 840.00-892.00)
[Wed Feb 22 06:45:25 2012] Size of ../../acisf12903/products/events/fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 239 counts
[Wed Feb 22 06:45:26 2012] rmf not found, will run specextract
[Wed Feb 22 06:45:26 2012] arf not found, will run specextract
[Wed Feb 22 06:46:05 2012] ../../acisf12903/products/spectra/fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3.warf not found
[Wed Feb 22 06:46:05 2012] ../../acisf12903/products/spectra/fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3.wrmf not found
[Wed Feb 22 06:46:05 2012] Removal of ../../acisf12903/products/spectra/fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3.soff failed
[Wed Feb 22 06:56:07 2012] Keeping rmf generated by specextract
[Wed Feb 22 06:56:07 2012] 188.041
[Wed Feb 22 07:02:40 2012] Updating aperture counts using extracted products
[Wed Feb 22 07:02:40 2012] Error reading totcts from fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Feb 22 07:02:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 07:02:41 2012] Using photon index=1.80, rate=0.00328, arf fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3.arf
[Wed Feb 22 07:02:41 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 07:02:41 2012] Updating source flux to 3.9e-14
[Wed Feb 22 07:03:13 2012] Reading fit data from acisf12903/analysis//spectral/fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3_pl.csv
[Wed Feb 22 07:03:13 2012] Spectral fit parameter nH value = 2.41407e+20
[Wed Feb 22 07:03:13 2012] Spectral fit parameter PhoIndex value = 1.88184
[Wed Feb 22 07:03:13 2012] Failed to get F(0.3-8.0) from acisf12903/analysis//spectral/fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Feb 22 07:03:13 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 07:03:13 2012] Using Nh = 2.4e+20, photon index=1.88, rate=0.00328, arf fullrun_ccd6_acisf12903_pi14-548_pass1_cl_src3.arf
[Wed Feb 22 07:03:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 07:03:13 2012] Updating source flux to 3.8e-14