[Wed Feb 22 00:54:08 2012] Detection parameters:
  Position = (944.5, 907.4) = 9 52 23.78 52 7 44.1
  Extent = 5.7" x 5.6", rotation angle = 99 degrees
  Source counts = 493.8 +/- 29.4
  Background counts = 368.2
  Rate = 0.005 +/- 0.0003

[Wed Feb 22 00:54:09 2012] Off-axis axis estimate = 14.39'
[Wed Feb 22 01:01:20 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 01:01:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 01:01:20 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Wed Feb 22 01:01:20 2012] source mask rpix=19.0, npix_max = 1520, mask sum = 1521, frac = 1.000
[Wed Feb 22 01:01:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.35"
[Wed Feb 22 01:45:59 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 22 01:45:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12903_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 01:45:59 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 22 01:45:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12903_pi14-548_cl_pass0_src1.csv
[Wed Feb 22 01:45:59 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12903_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12903_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 01:45:59 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 22 01:45:59 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 22 01:45:59 2012] Fit fullrun_ccd2_acisf12903_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 22 03:54:37 2012] Spatial fit model total counts = 1237.000000, observed total counts = 1237.000000
[Wed Feb 22 03:54:37 2012] Offset between fit and detection position for source 1 = 1.544291 pixels
[Wed Feb 22 03:54:37 2012] 1236.291000 total counts/ 553.433000 bgd. counts: snr = 29.026714
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.544291 pixels
  Position = (945.0, 908.8) = 9 52 23.78 52 7 44.6
  Extent = 9.0 (8.3-9.6)", rotation angle = 0
  Source counts = 682.9 +/- 35.2
  Background counts = 553.4
  Rate = 0.007 +/- 0.0004
[Wed Feb 22 03:54:37 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 03:54:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 03:54:37 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 03:54:37 2012] Source does appear to be extended
[Wed Feb 22 03:54:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 03:55:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 03:55:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 03:55:03 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Wed Feb 22 03:55:03 2012] source mask rpix=18.2, npix_max = 1400, mask sum = 1444, frac = 1.031
[Wed Feb 22 03:55:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.96"
[Wed Feb 22 04:32:43 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 22 04:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12903_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 04:32:43 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 22 04:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12903_pi14-548_cl_pass1_src1.csv
[Wed Feb 22 04:32:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12903_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12903_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 04:32:43 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 22 04:32:43 2012] fullrun_ccd2_acisf12903_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 22 04:32:43 2012] Fit fullrun_ccd2_acisf12903_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 22 06:33:42 2012] Spatial fit model total counts = 1201.000000, observed total counts = 1201.000000
[Wed Feb 22 06:33:42 2012] Offset between fit and detection position for source 1 = 0.098779 pixels
[Wed Feb 22 06:33:42 2012] 1200.387000 total counts/ 524.283000 bgd. counts: snr = 29.527768
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.098779 pixels
  Position = (945.1, 908.8) = 9 52 23.78 52 7 44.6
  Extent = 8.9 (8.2-9.5)", rotation angle = 0
  Source counts = 676.1 +/- 34.6
  Background counts = 524.3
  Rate = 0.007 +/- 0.0004
[Wed Feb 22 06:33:42 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 06:33:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 06:33:42 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 06:33:42 2012] Source does appear to be extended
[Wed Feb 22 06:33:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 06:34:06 2012] Writing source region out to fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1_src.reg
[Wed Feb 22 06:34:06 2012] Extracting stamp from image fullrun_ccd2_acisf12903_pi14-548_cl_sm2.00.img.gz, (538, 501) - (1311, 1311)
[Wed Feb 22 06:34:06 2012] Writing fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1.gif
[Wed Feb 22 06:34:08 2012] Size of ../../acisf12903/products/events/fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1065 counts
[Wed Feb 22 06:34:08 2012] Mean chipx,y = (362.77, 157.65)
[Wed Feb 22 06:34:08 2012] Mean tdetx,y = (3218.65, 3723.23)
[Wed Feb 22 06:34:08 2012] chipx,y range = (275.00-451.00, 76.00-237.00)
[Wed Feb 22 06:34:08 2012] Size of ../../acisf12903/products/events/fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3125 counts
[Wed Feb 22 06:34:10 2012] rmf not found, will run specextract
[Wed Feb 22 06:34:10 2012] arf not found, will run specextract
[Wed Feb 22 06:34:28 2012] ../../acisf12903/products/spectra/fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1.warf not found
[Wed Feb 22 06:34:28 2012] ../../acisf12903/products/spectra/fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1.wrmf not found
[Wed Feb 22 06:34:28 2012] Removal of ../../acisf12903/products/spectra/fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1.soff failed
[Wed Feb 22 06:38:23 2012] Keeping rmf generated by specextract
[Wed Feb 22 06:38:23 2012] 142.429
[Wed Feb 22 07:02:40 2012] Updating aperture counts using extracted products
[Wed Feb 22 07:02:40 2012] Error reading totcts from fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Feb 22 07:02:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 07:02:40 2012] Using photon index=1.80, rate=0.00706, arf fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1.arf
[Wed Feb 22 07:02:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 07:02:40 2012] Updating source flux to 1.1e-13
[Wed Feb 22 07:02:54 2012] Reading fit data from acisf12903/analysis//spectral/fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1_pl.csv
[Wed Feb 22 07:02:54 2012] Spectral fit parameter nH value = 3.00533e+15
[Wed Feb 22 07:02:54 2012] Spectral fit parameter PhoIndex value = 1.642
[Wed Feb 22 07:02:54 2012] Failed to get F(0.3-8.0) from acisf12903/analysis//spectral/fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Feb 22 07:02:54 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 07:02:54 2012] Using Nh = 3e+15, photon index=1.64, rate=0.00706, arf fullrun_ccd2_acisf12903_pi14-548_pass1_cl_src1.arf
[Wed Feb 22 07:02:54 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 22 07:02:54 2012] Updating source flux to 1.2e-13