[Fri Feb 17 15:19:41 2012] Detection parameters:
  Position = (990.7, 394.7) = 16 32 27.00 5 20 29.5
  Extent = 0.8" x 0.5", rotation angle = 7 degrees
  Source counts = 123.3 +/- 11.1
  Background counts = 0.7
  Rate = 0.02 +/- 0.002

[Fri Feb 17 15:19:41 2012] Off-axis axis estimate = 4.19'
[Fri Feb 17 15:20:54 2012] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Fri Feb 17 15:20:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 15:20:54 2012] Initial guess for spatial extent in simple fitting = 0.89"
[Fri Feb 17 15:20:54 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.177
[Fri Feb 17 15:20:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.89"
[Fri Feb 17 15:25:06 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 17 15:25:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12898_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 15:25:06 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 17 15:25:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12898_pi14-548_cl_pass0_src1.csv
[Fri Feb 17 15:25:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12898_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12898_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 15:25:06 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 17 15:25:06 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 17 15:25:06 2012] Fit fullrun_ccd0_acisf12898_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 17 15:32:57 2012] Spatial fit model total counts = 121.463000, observed total counts = 122.000000
[Fri Feb 17 15:32:57 2012] Offset between fit and detection position for source 1 = 0.568536 pixels
[Fri Feb 17 15:32:57 2012] 121.797710 total counts/ 1.696710 bgd. counts: snr = 92.202525
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.568536 pixels
  Position = (991.0, 395.2) = 16 32 27.00 5 20 29.5
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 120.1 +/- 11.0
  Background counts = 1.7
  Rate = 0.02 +/- 0.002
[Fri Feb 17 15:32:57 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:32:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:32:57 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 15:32:57 2012] Source does appear to be extended
[Fri Feb 17 15:32:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 15:33:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 15:33:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 15:33:09 2012] Initial guess for spatial extent in simple fitting = 0.74"
[Fri Feb 17 15:33:09 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.996
[Fri Feb 17 15:33:09 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.74"
[Fri Feb 17 15:36:28 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 15:36:28 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 15:36:28 2012] Fit fullrun_ccd0_acisf12898_pi14-548_cl_pass1_src1 appears to have run properly
[Fri Feb 17 15:36:28 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 15:36:28 2012] fullrun_ccd0_acisf12898_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 15:36:28 2012] Fit fullrun_ccd0_acisf12898_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 15:45:13 2012] Spatial fit model total counts = 123.915000, observed total counts = 123.000000
[Fri Feb 17 15:45:13 2012] Offset between fit and detection position for source 1 = 0.038619 pixels
[Fri Feb 17 15:45:13 2012] 124.226840 total counts/ 1.389840 bgd. counts: snr = 104.194981
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.038619 pixels
  Position = (991.1, 395.2) = 16 32 27.00 5 20 29.5
  Extent = 0.9 (0.8-1.1)" x 0.6 (0.5-0.6)", rotation angle = 351 (334-1) degrees
  Source counts = 122.8 +/- 11.1
  Background counts = 1.4
  Rate = 0.02 +/- 0.002
[Fri Feb 17 15:45:13 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 15:45:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 15:45:13 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 15:45:13 2012] Source does appear to be extended
[Fri Feb 17 15:45:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Fri Feb 17 15:45:25 2012] Writing source region out to fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1_src.reg
[Fri Feb 17 15:45:25 2012] Extracting stamp from image fullrun_ccd0_acisf12898_pi14-548_cl_sm2.00.img.gz, (948, 352) - (1034, 438)
[Fri Feb 17 15:45:25 2012] Writing fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1.gif
[Fri Feb 17 15:45:27 2012] Size of ../../acisf12898/products/events/fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1_src.evt.gz[events] = 123 counts
[Fri Feb 17 15:45:27 2012] Mean chipx,y = (628.28, 915.12)
[Fri Feb 17 15:45:27 2012] Mean tdetx,y = (3976.12, 4503.72)
[Fri Feb 17 15:45:27 2012] chipx,y range = (608.00-647.00, 898.00-936.00)
[Fri Feb 17 15:45:27 2012] Size of ../../acisf12898/products/events/fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 6 counts
[Fri Feb 17 15:45:28 2012] rmf not found, will run specextract
[Fri Feb 17 15:45:28 2012] arf not found, will run specextract
[Fri Feb 17 15:45:55 2012] ../../acisf12898/products/spectra/fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1.warf not found
[Fri Feb 17 15:45:55 2012] ../../acisf12898/products/spectra/fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1.wrmf not found
[Fri Feb 17 15:45:55 2012] Removal of ../../acisf12898/products/spectra/fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1.soff failed
[Fri Feb 17 15:49:44 2012] Keeping rmf generated by specextract
[Fri Feb 17 15:49:44 2012] 184.82
[Fri Feb 17 15:56:55 2012] Updating aperture counts using extracted products
[Fri Feb 17 15:56:55 2012] Error reading totcts from fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Feb 17 15:56:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 15:56:55 2012] Using photon index=1.80, rate=0.0246, arf fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1.arf
[Fri Feb 17 15:56:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 15:56:55 2012] Updating source flux to 3e-13
[Fri Feb 17 15:57:00 2012] Reading fit data from acisf12898/analysis//spectral/fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1_pl.csv
[Fri Feb 17 15:57:00 2012] Spectral fit parameter nH value = 7.90554e+20
[Fri Feb 17 15:57:00 2012] Spectral fit parameter PhoIndex value = 1.76973
[Fri Feb 17 15:57:00 2012] Failed to get F(0.3-8.0) from acisf12898/analysis//spectral/fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 15:57:00 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 15:57:00 2012] Using Nh = 7.9e+20, photon index=1.77, rate=0.0246, arf fullrun_ccd0_acisf12898_pi14-548_pass1_cl_src1.arf
[Fri Feb 17 15:57:00 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 15:57:00 2012] Updating source flux to 3e-13