[Sat Jun 23 21:34:30 2012] Detection parameters:
  Position = (461.1, 375.6) = 16 33 20.87 5 27 40.3
  Extent = 1.0" x 0.5", rotation angle = 81 degrees
  Source counts = 11.8 +/- 3.5
  Background counts = 0.2
  Rate = 0.002 +/- 0.0007

[Sat Jun 23 21:34:30 2012] Off-axis axis estimate = 4.85'
[Sat Jun 23 21:37:19 2012] Using EEF radius (= 1.12 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 21:37:19 2012] Initial guess for spatial extent in simple fitting = 1.12"
[Sat Jun 23 21:37:19 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.970
[Sat Jun 23 21:37:19 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 1.12"
[Sat Jun 23 21:48:46 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass0_src4.ximg exists
[Sat Jun 23 21:48:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12897_pi14-548_cl_pass0_src4.csv
[Sat Jun 23 21:48:46 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass0_src4_1.ximg exists
[Sat Jun 23 21:48:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12897_pi14-548_cl_pass0_src4.csv
[Sat Jun 23 21:48:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12897_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12897_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 21:48:46 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 23 21:48:46 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 23 21:48:46 2012] Fit fullrun_ccd0_acisf12897_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Jun 23 21:48:49 2012] Spatial fit model total counts = 14.432000, observed total counts = 14.000000
[Sat Jun 23 21:48:49 2012] Offset between fit and detection position for source 4 = 0.289578 pixels
[Sat Jun 23 21:48:49 2012] 14.307318 total counts/ 0.141618 bgd. counts: snr = 37.642531
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.289578 pixels
  Position = (461.1, 375.9) = 16 33 20.89 5 27 40.2
  Extent = 1.2 (0.7-1.7)", rotation angle = 0
  Source counts = 14.2 +/- 3.8
  Background counts = 0.1
  Rate = 0.003 +/- 0.0008
[Sat Jun 23 21:48:49 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 21:48:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 21:48:49 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 21:48:49 2012] Source does appear to be extended
[Sat Jun 23 21:48:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 21:48:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 21:48:59 2012] Initial guess for spatial extent in simple fitting = 1.15"
[Sat Jun 23 21:48:59 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.112
[Sat Jun 23 21:48:59 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 1.15"
[Sat Jun 23 21:57:45 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass1_src4.ximg exists
[Sat Jun 23 21:57:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12897_pi14-548_cl_pass1_src4.csv
[Sat Jun 23 21:57:45 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass1_src4_1.ximg exists
[Sat Jun 23 21:57:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12897_pi14-548_cl_pass1_src4.csv
[Sat Jun 23 21:57:45 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12897_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12897_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 21:57:45 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 23 21:57:45 2012] fullrun_ccd0_acisf12897_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 23 21:57:45 2012] Fit fullrun_ccd0_acisf12897_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Jun 23 21:57:48 2012] Spatial fit model total counts = 14.099200, observed total counts = 14.000000
[Sat Jun 23 21:57:48 2012] Offset between fit and detection position for source 4 = 0.347374 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.347374 pixels
  Position = (460.9, 375.6) = 16 33 20.89 5 27 40.0
  Extent = 1.2 (1.0-1.7)", rotation angle = 0
  Source counts = 14.1 +/- 3.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Sat Jun 23 21:57:48 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 21:57:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 21:57:48 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 21:57:48 2012] Source does appear to be extended
[Sat Jun 23 21:57:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 21:57:58 2012] Writing source region out to fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4_src.reg
[Sat Jun 23 21:57:58 2012] Extracting stamp from image fullrun_ccd0_acisf12897_pi14-548_cl_sm2.00.img.gz, (405, 319) - (517, 432)
[Sat Jun 23 21:57:58 2012] Writing fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4.gif
[Sat Jun 23 21:59:36 2012] Size of ../../acisf12897/products/events/fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4_src.evt.gz[events] = 14 counts
[Sat Jun 23 21:59:36 2012] Mean chipx,y = (738.29, 589.64)
[Sat Jun 23 21:59:36 2012] Mean tdetx,y = (3650.64, 4393.71)
[Sat Jun 23 21:59:36 2012] chipx,y range = (717.00-754.00, 577.00-610.00)
[Sat Jun 23 21:59:36 2012] Size of ../../acisf12897/products/events/fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 3 counts
[Sat Jun 23 21:59:37 2012] Not generating rmf since there are only 14 counts
[Sat Jun 23 21:59:37 2012] arf not found, will run specextract
[Sat Jun 23 22:00:06 2012] ../../acisf12897/products/spectra/fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4.warf not found
[Sat Jun 23 22:00:06 2012] ../../acisf12897/products/spectra/fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4.wrmf not found
[Sat Jun 23 22:00:06 2012] Removal of ../../acisf12897/products/spectra/fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4.soff failed
[Sat Jun 23 22:00:45 2012] Spectrum 4 has only 14 counts, deleting rmf
[Sat Jun 23 22:00:45 2012] 187.458
[Sat Jun 23 22:06:15 2012] Updating aperture counts using extracted products
[Sat Jun 23 22:06:15 2012] Error reading totcts from fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Jun 23 22:06:15 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 22:06:15 2012] Using photon index=1.80, rate=0.00283, arf fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4.arf
[Sat Jun 23 22:06:15 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jun 23 22:06:15 2012] Updating source flux to 3.4e-14
[Sat Jun 23 22:06:16 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 23 22:06:17 2012] acisf12897/analysis//spectral/fullrun_ccd0_acisf12897_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete