[Fri May  3 14:33:13 2013] Detection parameters:
  Position = (576.8, 815.1) = 16 33 2.07 5 46 46.8
  Extent = 0.5" x 0.5", rotation angle = 88 degrees
  Source counts = 13.9 +/- 3.7
  Background counts = 0.1
  Rate = 0.003 +/- 0.0007

[Fri May  3 14:33:13 2013] Off-axis axis estimate = 4.36'
[Fri May  3 14:41:39 2013] Using EEF radius (= 0.94 ")to estimate initial spatial extent for simple fitting
[Fri May  3 14:41:39 2013] Initial guess for spatial extent in simple fitting = 0.94"
[Fri May  3 14:41:39 2013] source mask rpix=1.9, npix_max = 23, mask sum = 15, frac = 0.641
[Fri May  3 14:41:39 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.94"
[Fri May  3 14:44:54 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass0_src2.ximg exists
[Fri May  3 14:44:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12895_pi14-548_cl_pass0_src2.csv
[Fri May  3 14:44:54 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass0_src2_1.ximg exists
[Fri May  3 14:44:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12895_pi14-548_cl_pass0_src2.csv
[Fri May  3 14:44:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12895_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12895_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:44:54 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri May  3 14:44:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12895_pi14-548_cl_pass0_tfrozen_src2.csv
[Fri May  3 14:44:54 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May  3 14:44:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12895_pi14-548_cl_pass0_tfrozen_src2.csv
[Fri May  3 14:44:54 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12895_pi14-548_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12895_pi14-548_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:44:56 2013] Spatial fit model total counts = 14.079600, observed total counts = 16.000000
[Fri May  3 14:44:56 2013] Offset between fit and detection position for source 1 = 0.514551 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.514551 pixels
  Position = (577.2, 815.4) = 16 33 2.07 5 46 46.7
  Extent = 0.8 (0.5-1.2)" x 0.4 (0.3-0.5)", rotation angle = 95 (73-122) degrees
  Source counts = 14.4 +/- 3.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Fri May  3 14:44:56 2013] Vigneting correction estimate = 1.000000
[Fri May  3 14:44:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 14:44:56 2013] Assessing source extent using major axis lower bound
[Fri May  3 14:44:56 2013] Source does appear to be extended
[Fri May  3 14:44:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.00
[Fri May  3 14:52:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 14:52:08 2013] Initial guess for spatial extent in simple fitting = 0.57"
[Fri May  3 14:52:08 2013] source mask rpix=1.2, npix_max = 11, mask sum = 8, frac = 0.720
[Fri May  3 14:52:08 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.57"
[Fri May  3 14:55:32 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass1_src2.ximg exists
[Fri May  3 14:55:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12895_pi14-548_cl_pass1_src2.csv
[Fri May  3 14:55:32 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass1_src2_1.ximg exists
[Fri May  3 14:55:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12895_pi14-548_cl_pass1_src2.csv
[Fri May  3 14:55:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12895_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12895_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 14:55:32 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri May  3 14:55:32 2013] fullrun_ccd3_acisf12895_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May  3 14:55:32 2013] Fit fullrun_ccd3_acisf12895_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri May  3 14:55:34 2013] Spatial fit model total counts = 14.234600, observed total counts = 16.000000
[Fri May  3 14:55:34 2013] Offset between fit and detection position for source 1 = 0.127111 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.127111 pixels
  Position = (577.2, 815.3) = 16 33 2.07 5 46 46.7
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.5)", rotation angle = 99 (72-123) degrees
  Source counts = 14.7 +/- 3.8
  Background counts = 0.0
  Rate = 0.003 +/- 0.0008
[Fri May  3 14:55:34 2013] Vigneting correction estimate = 1.000000
[Fri May  3 14:55:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 14:55:34 2013] Assessing source extent using major axis lower bound
[Fri May  3 14:55:34 2013] Source does appear to be extended
[Fri May  3 14:55:34 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Fri May  3 15:00:40 2013] Writing source region out to fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1_src.reg
[Fri May  3 15:00:40 2013] Extracting stamp from image fullrun_ccd3_acisf12895_pi14-548_cl_sm2.00.img.gz, (541, 779) - (613, 851)
[Fri May  3 15:00:40 2013] Writing fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1.gif
[Fri May  3 15:01:15 2013] Size of ../../acisf12895/products/events/fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1_src.evt.gz[events] = 14 counts
[Fri May  3 15:01:15 2013] Mean chipx,y = (528.00, 692.21)
[Fri May  3 15:01:15 2013] Mean tdetx,y = (4439.79, 3589.00)
[Fri May  3 15:01:15 2013] chipx,y range = (514.00-545.00, 676.00-709.00)
[Fri May  3 15:01:15 2013] Size of ../../acisf12895/products/events/fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 2 counts
[Fri May  3 15:01:16 2013] Not generating rmf since there are only 14 counts
[Fri May  3 15:01:16 2013] arf not found, will run specextract
[Fri May  3 15:01:43 2013] ../../acisf12895/products/spectra/fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1.warf not found
[Fri May  3 15:01:43 2013] ../../acisf12895/products/spectra/fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1.wrmf not found
[Fri May  3 15:01:43 2013] Removal of ../../acisf12895/products/spectra/fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1.soff failed
[Fri May  3 15:01:54 2013] Spectrum 1 has only 15 counts, deleting rmf
[Fri May  3 15:01:54 2013] 168.281
[Fri May  3 15:01:57 2013] Updating aperture counts using extracted products
[Fri May  3 15:01:57 2013] Total counts from fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1_src.pi.gz = 14.00
[Fri May  3 15:01:57 2013] Total counts from fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1_bgd.pi.gz = 2.00
[Fri May  3 15:01:57 2013] Got source and background scale factors 0.000001, 0.000022
[Fri May  3 15:01:57 2013] User source parameters:
  Position = (577.2, 815.3) = 16 33 2.07 5 46 46.7
  Extent = 0.8 (0.6-1.2)" x 0.4 (0.3-0.5)", rotation angle = 99 (72-123) degrees
  Source aperture counts = 13.9 +/- 4.8
  Background aperture counts = 0.1
  Rate = 0.003 +/- 0.001

[Fri May  3 15:01:57 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 15:01:57 2013] Using photon index=1.80, rate=0.00294, arf fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1.arf
[Fri May  3 15:01:57 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 15:01:57 2013] Updating source flux to 4e-14
[Fri May  3 15:02:01 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May  3 15:02:02 2013] acisf12895/analysis//spectral/fullrun_ccd3_acisf12895_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete