[Sat May 25 05:57:02 2013] Detection parameters:
  Position = (450.2, 630.3) = 14 24 22.20 37 59 5.2
  Extent = 0.8" x 0.6", rotation angle = 143 degrees
  Source counts = 27.6 +/- 5.3
  Background counts = 0.4
  Rate = 0.006 +/- 0.001

[Sat May 25 05:57:02 2013] Off-axis axis estimate = 5.74'
[Sat May 25 06:01:50 2013] Using EEF radius (= 1.51 ")to estimate initial spatial extent for simple fitting
[Sat May 25 06:01:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 06:01:50 2013] Initial guess for spatial extent in simple fitting = 1.51"
[Sat May 25 06:01:50 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.967
[Sat May 25 06:01:50 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 1.51"
[Sat May 25 06:05:29 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass0_src2.ximg exists
[Sat May 25 06:05:29 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass0_src2_1.ximg exists
[Sat May 25 06:05:29 2013] Fit fullrun_ccd3_acisf12892_pi14-548_cl_pass0_src2 appears to have run properly
[Sat May 25 06:05:29 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Sat May 25 06:05:29 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Sat May 25 06:05:29 2013] Fit fullrun_ccd3_acisf12892_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Sat May 25 06:05:32 2013] Spatial fit model total counts = 28.708000, observed total counts = 28.000000
[Sat May 25 06:05:32 2013] Offset between fit and detection position for source 1 = 0.734373 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.734373 pixels
  Position = (450.7, 630.8) = 14 24 22.20 37 59 5.2
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 28.7 +/- 5.4
  Background counts = 0.0
  Rate = 0.006 +/- 0.001
[Sat May 25 06:05:32 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:05:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:05:32 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:05:32 2013] Source does appear to be extended
[Sat May 25 06:05:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 06:08:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 06:08:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 25 06:08:58 2013] Initial guess for spatial extent in simple fitting = 0.94"
[Sat May 25 06:08:58 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.076
[Sat May 25 06:08:58 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.94"
[Sat May 25 06:12:38 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass1_src2.ximg exists
[Sat May 25 06:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12892_pi14-548_cl_pass1_src2.csv
[Sat May 25 06:12:38 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass1_src2_1.ximg exists
[Sat May 25 06:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12892_pi14-548_cl_pass1_src2.csv
[Sat May 25 06:12:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12892_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12892_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:12:38 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Sat May 25 06:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12892_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat May 25 06:12:38 2013] fullrun_ccd3_acisf12892_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Sat May 25 06:12:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12892_pi14-548_cl_pass1_tfrozen_src2.csv
[Sat May 25 06:12:38 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12892_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12892_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 06:12:44 2013] Spatial fit model total counts = 24.933500, observed total counts = 28.000000
[Sat May 25 06:12:44 2013] Offset between fit and detection position for source 1 = 0.295098 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.295098 pixels
  Position = (450.5, 631.0) = 14 24 22.21 37 59 5.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source counts = 25.0 +/- 5.0
  Background counts = 0.0
  Rate = 0.005 +/- 0.001
[Sat May 25 06:12:44 2013] Vigneting correction estimate = 1.000000
[Sat May 25 06:12:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 06:12:44 2013] Assessing source extent using major axis lower bound
[Sat May 25 06:12:44 2013] Source does appear to be extended
[Sat May 25 06:12:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 06:21:05 2013] Writing source region out to fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1_src.reg
[Sat May 25 06:21:05 2013] Extracting stamp from image fullrun_ccd3_acisf12892_pi14-548_cl_sm2.00.img.gz, (410, 591) - (491, 671)
[Sat May 25 06:21:05 2013] Writing fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1.gif
[Sat May 25 06:21:37 2013] Size of ../../acisf12892/products/events/fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1_src.evt.gz[events] = 28 counts
[Sat May 25 06:21:37 2013] Mean chipx,y = (401.29, 582.39)
[Sat May 25 06:21:37 2013] Mean tdetx,y = (4549.61, 3462.29)
[Sat May 25 06:21:37 2013] chipx,y range = (386.00-421.00, 565.00-600.00)
[Sat May 25 06:21:37 2013] Size of ../../acisf12892/products/events/fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 9 counts
[Sat May 25 06:21:38 2013] Not generating rmf since there are only 24 counts
[Sat May 25 06:21:38 2013] arf not found, will run specextract
[Sat May 25 06:22:04 2013] ../../acisf12892/products/spectra/fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1.warf not found
[Sat May 25 06:22:04 2013] ../../acisf12892/products/spectra/fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1.wrmf not found
[Sat May 25 06:22:04 2013] Removal of ../../acisf12892/products/spectra/fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1.soff failed
[Sat May 25 06:24:43 2013] Spectrum 1 has only 25 counts, deleting rmf
[Sat May 25 06:24:43 2013] 179.205
[Sat May 25 06:24:47 2013] Updating aperture counts using extracted products
[Sat May 25 06:24:47 2013] Total counts from fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1_src.pi.gz = 28.00
[Sat May 25 06:24:47 2013] Total counts from fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1_bgd.pi.gz = 9.00
[Sat May 25 06:24:47 2013] Got source and background scale factors 0.000002, 0.000029
[Sat May 25 06:24:47 2013] User source parameters:
  Position = (450.5, 631.0) = 14 24 22.21 37 59 5.3
  Extent = 0.9 (0.7-1.1)", rotation angle = 0
  Source aperture counts = 27.2 +/- 6.4
  Background aperture counts = 0.8
  Rate = 0.005 +/- 0.001

[Sat May 25 06:24:48 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 25 06:24:48 2013] Using photon index=1.80, rate=0.00501, arf fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1.arf
[Sat May 25 06:24:48 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May 25 06:24:48 2013] Updating source flux to 6.8e-14
[Sat May 25 06:24:52 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 25 06:24:53 2013] acisf12892/analysis//spectral/fullrun_ccd3_acisf12892_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete