[Tue Nov 29 23:40:21 2011] Detection parameters:
  Position = (717.7, 1024.7) = 12 57 6.90 27 32 27.3
  Extent = 0.7" x 0.7", rotation angle = 39 degrees
  Source counts = 16.1 +/- 4.2
  Background counts = 1.9
  Rate = 0.0004 +/- 0.0001

[Tue Nov 29 23:40:21 2011] Off-axis axis estimate = 5.25'
[Wed Nov 30 00:31:33 2011] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 00:31:33 2011] Initial guess for spatial extent in simple fitting = 1.28"
[Wed Nov 30 00:31:33 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.930
[Wed Nov 30 00:31:33 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.28"
[Wed Nov 30 00:46:26 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass0_src11.ximg exists
[Wed Nov 30 00:46:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12887_pi14-548_cl_pass0_src11.csv
[Wed Nov 30 00:46:26 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Nov 30 00:46:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12887_pi14-548_cl_pass0_src11.csv
[Wed Nov 30 00:46:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12887_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12887_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 00:46:26 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Nov 30 00:46:26 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Nov 30 00:46:26 2011] Fit fullrun_ccd3_acisf12887_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Nov 30 01:30:59 2011] Spatial fit model total counts = 23.247100, observed total counts = 23.000000
[Wed Nov 30 01:30:59 2011] Offset between fit and detection position for source 13 = 1.540496 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.540496 pixels
  Position = (718.6, 1026.0) = 12 57 6.88 27 32 27.7
  Extent = 1.2 (0.8-1.7)", rotation angle = 0
  Source counts = 22.7 +/- 4.8
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Wed Nov 30 01:30:59 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 01:30:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 01:30:59 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 01:30:59 2011] Source does appear to be extended
[Wed Nov 30 01:30:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 02:19:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:19:08 2011] Initial guess for spatial extent in simple fitting = 1.24"
[Wed Nov 30 02:19:08 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Wed Nov 30 02:19:08 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.24"
[Wed Nov 30 02:31:32 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass1_src10.ximg exists
[Wed Nov 30 02:31:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12887_pi14-548_cl_pass1_src10.csv
[Wed Nov 30 02:31:32 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Nov 30 02:31:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12887_pi14-548_cl_pass1_src10.csv
[Wed Nov 30 02:31:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12887_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12887_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 02:31:32 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Nov 30 02:31:32 2011] fullrun_ccd3_acisf12887_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Nov 30 02:31:32 2011] Fit fullrun_ccd3_acisf12887_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Nov 30 03:28:54 2011] Spatial fit model total counts = 23.764500, observed total counts = 24.000000
[Wed Nov 30 03:28:54 2011] Offset between fit and detection position for source 13 = 0.188733 pixels
[Wed Nov 30 03:28:54 2011] 23.368850 total counts/ 4.567750 bgd. counts: snr = 8.796949
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.188733 pixels
  Position = (718.4, 1025.9) = 12 57 6.89 27 32 27.7
  Extent = 1.1 (0.7-1.4)", rotation angle = 0
  Source counts = 18.8 +/- 4.8
  Background counts = 4.6
  Rate = 0.0004 +/- 0.0001
[Wed Nov 30 03:28:54 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 03:28:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 03:28:54 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 03:28:54 2011] Source does appear to be extended
[Wed Nov 30 03:28:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 03:50:50 2011] Writing source region out to fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13_src.reg
[Wed Nov 30 03:50:50 2011] Extracting stamp from image fullrun_ccd3_acisf12887_pi14-548_cl_sm2.00.img.gz, (668, 975) - (769, 1077)
[Wed Nov 30 03:50:50 2011] Writing fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13.gif
[Wed Nov 30 03:56:31 2011] Size of ../../acisf12887/products/events/fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13_src.evt.gz[events] = 23 counts
[Wed Nov 30 03:56:31 2011] Mean chipx,y = (264.57, 705.78)
[Wed Nov 30 03:56:31 2011] Mean tdetx,y = (4426.22, 3325.57)
[Wed Nov 30 03:56:31 2011] chipx,y range = (245.00-280.00, 687.00-724.00)
[Wed Nov 30 03:56:31 2011] Size of ../../acisf12887/products/events/fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 59 counts
[Wed Nov 30 03:56:32 2011] Not generating rmf since there are only 18 counts
[Wed Nov 30 03:56:32 2011] arf not found, will run specextract
[Wed Nov 30 03:57:05 2011] ../../acisf12887/products/spectra/fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13.warf not found
[Wed Nov 30 03:57:05 2011] ../../acisf12887/products/spectra/fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13.wrmf not found
[Wed Nov 30 03:57:05 2011] Removal of ../../acisf12887/products/spectra/fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13.soff failed
[Wed Nov 30 03:58:34 2011] Spectrum 13 has only 19 counts, deleting rmf
[Wed Nov 30 03:58:34 2011] 172.248
[Wed Nov 30 04:00:56 2011] Updating aperture counts using extracted products
[Wed Nov 30 04:00:56 2011] Error reading totcts from fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Nov 30 04:00:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 04:00:56 2011] Using photon index=1.80, rate=0.000433, arf fullrun_ccd3_acisf12887_pi14-548_pass1_cl_src13.arf
[Wed Nov 30 04:00:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov 30 04:00:56 2011] Updating source flux to 6.1e-15
[Wed Nov 30 04:01:15 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting