[Tue Nov 29 23:39:44 2011] Detection parameters:
  Position = (1062.4, 833.6) = 12 57 24.29 27 36 6.3
  Extent = 0.5" x 0.5", rotation angle = 111 degrees
  Source counts = 33.8 +/- 6.1
  Background counts = 3.2
  Rate = 0.0008 +/- 0.0001

[Tue Nov 29 23:39:44 2011] Off-axis axis estimate = 5.71'
[Wed Nov 30 00:18:55 2011] Using EEF radius (= 1.49 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 00:18:55 2011] Initial guess for spatial extent in simple fitting = 1.49"
[Wed Nov 30 00:18:55 2011] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.803
[Wed Nov 30 00:18:55 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.49"
[Wed Nov 30 00:31:33 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass0_src7.ximg exists
[Wed Nov 30 00:31:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12887_pi14-548_cl_pass0_src7.csv
[Wed Nov 30 00:31:33 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Nov 30 00:31:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12887_pi14-548_cl_pass0_src7.csv
[Wed Nov 30 00:31:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12887_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12887_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 00:31:33 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Nov 30 00:31:33 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Nov 30 00:31:33 2011] Fit fullrun_ccd2_acisf12887_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Nov 30 01:30:57 2011] Spatial fit model total counts = 38.492300, observed total counts = 44.000000
[Wed Nov 30 01:30:57 2011] Offset between fit and detection position for source 6 = 0.295834 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.295834 pixels
  Position = (1062.2, 833.9) = 12 57 24.32 27 36 6.2
  Extent = 1.8" x 1.0", rotation angle = 24
  Source counts = 38.1 +/- 6.2
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0001
[Wed Nov 30 01:30:57 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 01:30:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 01:30:57 2011] Assessing source extent using major
[Wed Nov 30 01:30:57 2011] Source does appear to be extended
[Wed Nov 30 01:30:57 2011] Computing asymmetry using major and minor axis, asym = 1.93
[Wed Nov 30 01:30:57 2011] Source is asymmetric
[Wed Nov 30 02:06:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 02:06:44 2011] Initial guess for spatial extent in simple fitting = 1.40"
[Wed Nov 30 02:06:44 2011] source mask rpix=2.8, npix_max = 44, mask sum = 34, frac = 0.760
[Wed Nov 30 02:06:44 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.40"
[Wed Nov 30 02:19:08 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass1_src7.ximg exists
[Wed Nov 30 02:19:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12887_pi14-548_cl_pass1_src7.csv
[Wed Nov 30 02:19:08 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass1_src7_1.ximg exists
[Wed Nov 30 02:19:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12887_pi14-548_cl_pass1_src7.csv
[Wed Nov 30 02:19:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12887_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12887_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 02:19:08 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed Nov 30 02:19:08 2011] fullrun_ccd2_acisf12887_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Nov 30 02:19:08 2011] Fit fullrun_ccd2_acisf12887_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Nov 30 03:28:53 2011] Spatial fit model total counts = 43.063200, observed total counts = 43.000000
[Wed Nov 30 03:28:53 2011] Offset between fit and detection position for source 6 = 0.154721 pixels
[Wed Nov 30 03:28:53 2011] 42.223500 total counts/ 12.165200 bgd. counts: snr = 8.617966
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.154721 pixels
  Position = (1062.2, 834.0) = 12 57 24.32 27 36 6.3
  Extent = 0.9 (0.6-1.6)", rotation angle = 0
  Source counts = 30.1 +/- 6.5
  Background counts = 12.2
  Rate = 0.0007 +/- 0.0001
[Wed Nov 30 03:28:53 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 03:28:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 03:28:53 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 03:28:53 2011] Source does appear to be extended
[Wed Nov 30 03:28:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 03:41:06 2011] Writing source region out to fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6_src.reg
[Wed Nov 30 03:41:06 2011] Extracting stamp from image fullrun_ccd2_acisf12887_pi14-548_cl_sm2.00.img.gz, (1021, 793) - (1103, 875)
[Wed Nov 30 03:41:06 2011] Writing fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6.gif
[Wed Nov 30 03:44:41 2011] Size of ../../acisf12887/products/events/fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6_src.evt.gz[events] = 41 counts
[Wed Nov 30 03:44:41 2011] Mean chipx,y = (818.90, 716.88)
[Wed Nov 30 03:44:41 2011] Mean tdetx,y = (3777.88, 3267.10)
[Wed Nov 30 03:44:41 2011] chipx,y range = (801.00-838.00, 694.00-734.00)
[Wed Nov 30 03:44:41 2011] Size of ../../acisf12887/products/events/fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 27 counts
[Wed Nov 30 03:44:43 2011] Not generating rmf since there are only 30 counts
[Wed Nov 30 03:44:43 2011] arf not found, will run specextract
[Wed Nov 30 03:45:09 2011] ../../acisf12887/products/spectra/fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6.warf not found
[Wed Nov 30 03:45:09 2011] ../../acisf12887/products/spectra/fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6.wrmf not found
[Wed Nov 30 03:45:09 2011] Removal of ../../acisf12887/products/spectra/fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6.soff failed
[Wed Nov 30 03:50:50 2011] Spectrum 6 has only 30 counts, deleting rmf
[Wed Nov 30 03:50:50 2011] 172.09
[Wed Nov 30 04:00:55 2011] Updating aperture counts using extracted products
[Wed Nov 30 04:00:55 2011] Error reading totcts from fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6_src.pi.gz
[Wed Nov 30 04:00:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 04:00:56 2011] Using photon index=1.80, rate=0.000692, arf fullrun_ccd2_acisf12887_pi14-548_pass1_cl_src6.arf
[Wed Nov 30 04:00:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov 30 04:00:56 2011] Updating source flux to 9.8e-15
[Wed Nov 30 04:01:09 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting