[Thu Oct 27 15:41:42 2011] Detection parameters:
  Position = (748.5, 765.6) = 2 18 17.10 -5 9 52.8
  Extent = 0.6" x 0.5", rotation angle = 107 degrees
  Source counts = 19.3 +/- 4.7
  Background counts = 2.7
  Rate = 0.0002 +/- 6e-05

[Thu Oct 27 15:41:42 2011] Off-axis axis estimate = 2.02'
[Thu Oct 27 18:59:02 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 18:59:02 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Thu Oct 27 18:59:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.186
[Thu Oct 27 18:59:02 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.43"
[Thu Oct 27 19:24:56 2011] fullrun_ccd7_acisf12882_pi14-548_cl_pass0_src19.ximg exists
[Thu Oct 27 19:24:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12882_pi14-548_cl_pass0_src19.csv
[Thu Oct 27 19:24:56 2011] fullrun_ccd7_acisf12882_pi14-548_cl_pass0_src19_1.ximg exists
[Thu Oct 27 19:24:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12882_pi14-548_cl_pass0_src19.csv
[Thu Oct 27 19:24:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12882_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12882_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 19:24:57 2011] fullrun_ccd7_acisf12882_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Thu Oct 27 19:24:57 2011] fullrun_ccd7_acisf12882_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Oct 27 19:24:57 2011] Fit fullrun_ccd7_acisf12882_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Oct 27 19:25:08 2011] Spatial fit model total counts = 29.981700, observed total counts = 30.000000
[Thu Oct 27 19:25:08 2011] Offset between fit and detection position for source 10 = 0.623230 pixels
[Thu Oct 27 19:25:08 2011] 29.157300 total counts/ 10.659500 bgd. counts: snr = 5.665675
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.623230 pixels
  Position = (749.0, 766.0) = 2 18 17.10 -5 9 52.8
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 18.5 +/- 5.4
  Background counts = 10.7
  Rate = 0.0002 +/- 6e-05
[Thu Oct 27 19:25:08 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 19:25:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 19:25:08 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 19:25:08 2011] Source does appear to be extended
[Thu Oct 27 19:25:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 22:46:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 22:46:49 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Thu Oct 27 22:46:49 2011] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.477
[Thu Oct 27 22:46:49 2011] Skipping simple spatial due to low active detector fraction
[Thu Oct 27 23:13:14 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 23:13:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 23:13:14 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 23:13:14 2011] Source does appear to be extended
[Thu Oct 27 23:13:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 23:36:02 2011] Writing source region out to fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10_src.reg
[Thu Oct 27 23:36:02 2011] Extracting stamp from image fullrun_ccd7_acisf12882_pi14-548_cl_sm2.00.img.gz, (728, 745) - (770, 787)
[Thu Oct 27 23:36:02 2011] Writing fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10.gif
[Thu Oct 27 23:41:40 2011] Size of ../../acisf12882/products/events/fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10_src.evt.gz[events] = 20 counts
[Thu Oct 27 23:41:40 2011] Mean chipx,y = (382.30, 350.95)
[Thu Oct 27 23:41:40 2011] Mean tdetx,y = (4299.30, 2052.95)
[Thu Oct 27 23:41:40 2011] chipx,y range = (366.00-402.00, 336.00-369.00)
[Thu Oct 27 23:41:40 2011] Size of ../../acisf12882/products/events/fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 23 counts
[Thu Oct 27 23:41:41 2011] Not generating rmf since there are only 18 counts
[Thu Oct 27 23:41:41 2011] arf not found, will run specextract
[Thu Oct 27 23:41:49 2011] ../../acisf12882/products/spectra/fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10.warf not found
[Thu Oct 27 23:41:49 2011] ../../acisf12882/products/spectra/fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10.wrmf not found
[Thu Oct 27 23:41:49 2011] Removal of ../../acisf12882/products/spectra/fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10.soff failed
[Thu Oct 27 23:44:21 2011] Spectrum 10 has only 18 counts, deleting rmf
[Thu Oct 27 23:44:21 2011] 232.533
[Thu Oct 27 23:44:25 2011] Updating aperture counts using extracted products
[Thu Oct 27 23:44:25 2011] Error reading totcts from fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Oct 27 23:44:25 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 23:44:25 2011] Using photon index=1.80, rate=0.000219, arf fullrun_ccd7_acisf12882_pi14-548_pass1_cl_src10.arf
[Thu Oct 27 23:44:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 23:44:25 2011] Updating source flux to 1.6e-15
[Thu Oct 27 23:44:58 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting