[Thu Oct 27 15:39:46 2011] Detection parameters:
  Position = (1123.2, 212.8) = 2 18 53.70 -5 9 39.4
  Extent = 1.7" x 1.3", rotation angle = 46 degrees
  Source counts = 17.4 +/- 4.8
  Background counts = 5.6
  Rate = 0.0002 +/- 6e-05

[Thu Oct 27 15:39:46 2011] Off-axis axis estimate = 7.67'
[Thu Oct 27 15:45:08 2011] Using EEF radius (= 2.60 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 15:45:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 15:45:08 2011] Initial guess for spatial extent in simple fitting = 2.60"
[Thu Oct 27 15:45:08 2011] source mask rpix=5.3, npix_max = 134, mask sum = 144, frac = 1.072
[Thu Oct 27 15:45:08 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.60"
[Thu Oct 27 16:46:10 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 16:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12882_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 16:46:10 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 16:46:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12882_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 16:46:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12882_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12882_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 16:46:10 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 16:46:10 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 16:46:10 2011] Fit fullrun_ccd2_acisf12882_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 19:25:01 2011] Spatial fit model total counts = 68.008800, observed total counts = 68.000000
[Thu Oct 27 19:25:01 2011] Offset between fit and detection position for source 1 = 3.221538 pixels
[Thu Oct 27 19:25:01 2011] 68.120600 total counts/ 21.735100 bgd. counts: snr = 9.949504
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.221538 pixels
  Position = (1124.5, 209.8) = 2 18 53.67 -5 9 41.1
  Extent = 3.5 (2.6-4.7)", rotation angle = 0
  Source counts = 46.4 +/- 8.3
  Background counts = 21.7
  Rate = 0.0005 +/- 0.0001
[Thu Oct 27 19:25:01 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 19:25:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 19:25:01 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 19:25:01 2011] Source does appear to be extended
[Thu Oct 27 19:25:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 19:25:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 19:25:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 19:25:23 2011] Initial guess for spatial extent in simple fitting = 3.45"
[Thu Oct 27 19:25:23 2011] source mask rpix=7.0, npix_max = 225, mask sum = 225, frac = 0.996
[Thu Oct 27 19:25:23 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.45"
[Thu Oct 27 19:59:48 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 19:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12882_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 19:59:48 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 19:59:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12882_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 19:59:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12882_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12882_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 19:59:48 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 19:59:48 2011] fullrun_ccd2_acisf12882_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 19:59:48 2011] Fit fullrun_ccd2_acisf12882_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 23:13:06 2011] Warning, spatial fit 1 centroid is now closest to src. 2
[Thu Oct 27 23:13:06 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 23:13:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 23:13:06 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 23:13:06 2011] Source does appear to be extended
[Thu Oct 27 23:13:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 23:13:32 2011] Writing source region out to fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1_src.reg
[Thu Oct 27 23:13:32 2011] Extracting stamp from image fullrun_ccd2_acisf12882_pi14-548_cl_sm2.00.img.gz, (967, 52) - (1205, 368)
[Thu Oct 27 23:13:32 2011] Writing fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1.gif
[Thu Oct 27 23:13:35 2011] Size of ../../acisf12882/products/events/fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1_src.evt.gz[events] = 77 counts
[Thu Oct 27 23:13:35 2011] Mean chipx,y = (948.08, 996.57)
[Thu Oct 27 23:13:35 2011] Mean tdetx,y = (4057.57, 3137.92)
[Thu Oct 27 23:13:35 2011] chipx,y range = (905.00-981.00, 955.00-1022.00)
[Thu Oct 27 23:13:35 2011] Size of ../../acisf12882/products/events/fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 267 counts
[Thu Oct 27 23:13:38 2011] Not generating rmf since there are only 46 counts
[Thu Oct 27 23:13:38 2011] arf not found, will run specextract
[Thu Oct 27 23:14:13 2011] ../../acisf12882/products/spectra/fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1.warf not found
[Thu Oct 27 23:14:13 2011] ../../acisf12882/products/spectra/fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1.wrmf not found
[Thu Oct 27 23:14:13 2011] Removal of ../../acisf12882/products/spectra/fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1.soff failed
[Thu Oct 27 23:16:52 2011] Spectrum 1 has only 46 counts, deleting rmf
[Thu Oct 27 23:16:52 2011] 164
[Thu Oct 27 23:44:24 2011] Updating aperture counts using extracted products
[Thu Oct 27 23:44:24 2011] Error reading totcts from fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Oct 27 23:44:24 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 23:44:24 2011] Using photon index=1.80, rate=0.000549, arf fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1.arf
[Thu Oct 27 23:44:24 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 23:44:24 2011] Updating source flux to 7.9e-15
[Thu Oct 27 23:44:28 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 23:44:32 2011] acisf12882/analysis//spectral/fullrun_ccd2_acisf12882_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete