[Sun Apr 29 05:00:33 2012] Detection parameters:
  Position = (160.1, 376.6) = 12 26 47.69 21 44 1.2
  Extent = 1.9" x 1.2", rotation angle = 150 degrees
  Source counts = 327.1 +/- 18.8
  Background counts = 25.9
  Rate = 0.003 +/- 0.0001

[Sun Apr 29 05:00:33 2012] Off-axis axis estimate = 6.31'
[Sun Apr 29 06:32:01 2012] Using EEF radius (= 1.79 ")to estimate initial spatial extent for simple fitting
[Sun Apr 29 06:32:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr 29 06:32:01 2012] Initial guess for spatial extent in simple fitting = 1.79"
[Sun Apr 29 06:32:01 2012] source mask rpix=3.6, npix_max = 68, mask sum = 72, frac = 1.049
[Sun Apr 29 06:32:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.79"
[Sun Apr 29 06:56:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass0_src1.ximg exists
[Sun Apr 29 06:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12878_pi14-548_cl_pass0_src1.csv
[Sun Apr 29 06:56:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Apr 29 06:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12878_pi14-548_cl_pass0_src1.csv
[Sun Apr 29 06:56:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12878_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12878_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 06:56:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Apr 29 06:56:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Apr 29 06:56:36 2012] Fit fullrun_ccd2_acisf12878_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Apr 29 07:36:09 2012] Spatial fit model total counts = 355.996000, observed total counts = 356.000000
[Sun Apr 29 07:36:09 2012] Offset between fit and detection position for source 28 = 0.633206 pixels
[Sun Apr 29 07:36:09 2012] 357.362000 total counts/ 61.035000 bgd. counts: snr = 37.929905
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.633206 pixels
  Position = (160.4, 377.2) = 12 26 47.70 21 44 1.2
  Extent = 1.5 (1.3-1.6)", rotation angle = 0
  Source counts = 296.3 +/- 18.9
  Background counts = 61.0
  Rate = 0.002 +/- 0.0001
[Sun Apr 29 07:36:09 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 07:36:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 07:36:09 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 07:36:09 2012] Source does appear to be extended
[Sun Apr 29 07:36:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 08:56:12 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Apr 29 08:56:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Apr 29 08:56:12 2012] Initial guess for spatial extent in simple fitting = 1.50"
[Sun Apr 29 08:56:12 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Sun Apr 29 08:56:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.50"
[Sun Apr 29 09:19:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass1_src1.ximg exists
[Sun Apr 29 09:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12878_pi14-548_cl_pass1_src1.csv
[Sun Apr 29 09:19:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Apr 29 09:19:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12878_pi14-548_cl_pass1_src1.csv
[Sun Apr 29 09:19:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12878_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12878_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Apr 29 09:19:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Apr 29 09:19:36 2012] fullrun_ccd2_acisf12878_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Apr 29 09:19:36 2012] Fit fullrun_ccd2_acisf12878_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Apr 29 09:55:27 2012] Spatial fit model total counts = 350.261000, observed total counts = 349.000000
[Sun Apr 29 09:55:27 2012] Offset between fit and detection position for source 28 = 0.135328 pixels
[Sun Apr 29 09:55:27 2012] 352.817700 total counts/ 72.111700 bgd. counts: snr = 33.055888
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.135328 pixels
  Position = (160.4, 377.0) = 12 26 47.69 21 44 1.2
  Extent = 1.4 (1.3-1.6)", rotation angle = 0
  Source counts = 280.7 +/- 18.8
  Background counts = 72.1
  Rate = 0.002 +/- 0.0001
[Sun Apr 29 09:55:27 2012] Vigneting correction estimate = 1.000000
[Sun Apr 29 09:55:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Apr 29 09:55:27 2012] Assessing source extent using major axis lower bound
[Sun Apr 29 09:55:27 2012] Source does appear to be extended
[Sun Apr 29 09:55:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Apr 29 10:20:45 2012] Writing source region out to fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28_src.reg
[Sun Apr 29 10:20:45 2012] Extracting stamp from image fullrun_ccd2_acisf12878_pi14-548_cl_sm2.00.img.gz, (96, 313) - (224, 441)
[Sun Apr 29 10:20:45 2012] Writing fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28.gif
[Sun Apr 29 10:20:47 2012] Size of ../../acisf12878/products/events/fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28_src.evt.gz[events] = 334 counts
[Sun Apr 29 10:20:47 2012] Mean chipx,y = (989.90, 873.79)
[Sun Apr 29 10:20:47 2012] Mean tdetx,y = (3934.79, 3096.10)
[Sun Apr 29 10:20:47 2012] chipx,y range = (967.00-1011.00, 848.00-899.00)
[Sun Apr 29 10:20:47 2012] Size of ../../acisf12878/products/events/fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 133 counts
[Sun Apr 29 10:20:49 2012] rmf not found, will run specextract
[Sun Apr 29 10:20:49 2012] arf not found, will run specextract
[Sun Apr 29 10:21:24 2012] ../../acisf12878/products/spectra/fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28.warf not found
[Sun Apr 29 10:21:24 2012] ../../acisf12878/products/spectra/fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28.wrmf not found
[Sun Apr 29 10:21:24 2012] Removal of ../../acisf12878/products/spectra/fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28.soff failed
[Sun Apr 29 10:35:58 2012] Keeping rmf generated by specextract
[Sun Apr 29 10:35:58 2012] 169.778
[Sun Apr 29 10:57:06 2012] Updating aperture counts using extracted products
[Sun Apr 29 10:57:06 2012] Error reading totcts from fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28_src.pi.gz
[Sun Apr 29 10:57:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr 29 10:57:06 2012] Using photon index=1.80, rate=0.00216, arf fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28.arf
[Sun Apr 29 10:57:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Apr 29 10:57:06 2012] Updating source flux to 3.1e-14
[Sun Apr 29 10:57:55 2012] Reading fit data from acisf12878/analysis//spectral/fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28_pl.csv
[Sun Apr 29 10:57:55 2012] Spectral fit parameter nH value = 2.19488e+21
[Sun Apr 29 10:57:55 2012] Spectral fit parameter PhoIndex value = 1.37061
[Sun Apr 29 10:57:55 2012] Failed to get F(0.3-8.0) from acisf12878/analysis//spectral/fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28_pl.csv, possibly due to different flux energy range selected
[Sun Apr 29 10:57:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Apr 29 10:57:55 2012] Using Nh = 2.2e+21, photon index=1.37, rate=0.00216, arf fullrun_ccd2_acisf12878_pi14-548_pass1_cl_src28.arf
[Sun Apr 29 10:57:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Apr 29 10:57:55 2012] Updating source flux to 3.5e-14