[Fri May  3 23:07:40 2013] Detection parameters:
  Position = (509.7, 667.4) = 14 40 59.29 4 53 45.8
  Extent = 0.5" x 0.5", rotation angle = 89 degrees
  Source counts = 15.1 +/- 4.0
  Background counts = 0.9
  Rate = 0.0007 +/- 0.0002

[Fri May  3 23:07:41 2013] Off-axis axis estimate = 1.99'
[Fri May  3 23:08:04 2013] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Fri May  3 23:08:04 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Fri May  3 23:08:04 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.196
[Fri May  3 23:08:04 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 0.43"
[Fri May  3 23:14:27 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass0_src3.ximg exists
[Fri May  3 23:14:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12860_pi14-548_cl_pass0_src3.csv
[Fri May  3 23:14:27 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass0_src3_1.ximg exists
[Fri May  3 23:14:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12860_pi14-548_cl_pass0_src3.csv
[Fri May  3 23:14:27 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12860_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12860_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 23:14:27 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri May  3 23:14:27 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May  3 23:14:27 2013] Fit fullrun_ccd7_acisf12860_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May  3 23:14:29 2013] Spatial fit model total counts = 17.031500, observed total counts = 19.000000
[Fri May  3 23:14:29 2013] Offset between fit and detection position for source 3 = 0.716196 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.716196 pixels
  Position = (510.2, 667.9) = 14 40 59.28 4 53 45.8
  Extent = 0.6 (0.5-1.1)" x 0.3 (0.2-0.4)", rotation angle = 91 (69-110) degrees
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri May  3 23:14:29 2013] Vigneting correction estimate = 1.000000
[Fri May  3 23:14:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 23:14:29 2013] Assessing source extent using major axis lower bound
[Fri May  3 23:14:29 2013] Source does appear to be extended
[Fri May  3 23:14:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Fri May  3 23:14:35 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 23:14:35 2013] Initial guess for spatial extent in simple fitting = 0.47"
[Fri May  3 23:14:35 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.050
[Fri May  3 23:14:35 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 0.47"
[Fri May  3 23:19:57 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass1_src3.ximg exists
[Fri May  3 23:19:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12860_pi14-548_cl_pass1_src3.csv
[Fri May  3 23:19:57 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass1_src3_1.ximg exists
[Fri May  3 23:19:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12860_pi14-548_cl_pass1_src3.csv
[Fri May  3 23:19:57 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12860_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12860_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 23:19:58 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri May  3 23:19:58 2013] fullrun_ccd7_acisf12860_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May  3 23:19:58 2013] Fit fullrun_ccd7_acisf12860_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri May  3 23:19:59 2013] Spatial fit model total counts = 17.181800, observed total counts = 19.000000
[Fri May  3 23:19:59 2013] Offset between fit and detection position for source 3 = 0.008570 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.008570 pixels
  Position = (510.2, 667.9) = 14 40 59.28 4 53 45.8
  Extent = 0.6 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 91 (69-110) degrees
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Fri May  3 23:19:59 2013] Vigneting correction estimate = 1.000000
[Fri May  3 23:19:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 23:19:59 2013] Assessing source extent using major axis lower bound
[Fri May  3 23:19:59 2013] Source does appear to be extended
[Fri May  3 23:19:59 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.01
[Fri May  3 23:20:02 2013] Writing source region out to fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3_src.reg
[Fri May  3 23:20:02 2013] Extracting stamp from image fullrun_ccd7_acisf12860_pi14-548_cl_sm2.00.img.gz, (481, 638) - (540, 697)
[Fri May  3 23:20:02 2013] Writing fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3.gif
[Fri May  3 23:20:38 2013] Size of ../../acisf12860/products/events/fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3_src.evt.gz[events] = 17 counts
[Fri May  3 23:20:38 2013] Mean chipx,y = (428.41, 457.53)
[Fri May  3 23:20:38 2013] Mean tdetx,y = (4345.41, 2159.53)
[Fri May  3 23:20:38 2013] chipx,y range = (414.00-447.00, 437.00-468.00)
[Fri May  3 23:20:38 2013] Size of ../../acisf12860/products/events/fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 13 counts
[Fri May  3 23:20:39 2013] Not generating rmf since there are only 16 counts
[Fri May  3 23:20:39 2013] arf not found, will run specextract
[Fri May  3 23:20:47 2013] ../../acisf12860/products/spectra/fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3.warf not found
[Fri May  3 23:20:47 2013] ../../acisf12860/products/spectra/fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3.wrmf not found
[Fri May  3 23:20:47 2013] Removal of ../../acisf12860/products/spectra/fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3.soff failed
[Fri May  3 23:23:10 2013] Spectrum 3 has only 16 counts, deleting rmf
[Fri May  3 23:23:10 2013] 232.002
[Fri May  3 23:23:11 2013] Updating aperture counts using extracted products
[Fri May  3 23:23:11 2013] Total counts from fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3_src.pi.gz = 17.00
[Fri May  3 23:23:11 2013] Total counts from fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3_bgd.pi.gz = 13.00
[Fri May  3 23:23:11 2013] Got source and background scale factors 0.000001, 0.000015
[Fri May  3 23:23:11 2013] User source parameters:
  Position = (510.2, 667.9) = 14 40 59.28 4 53 45.8
  Extent = 0.6 (0.5-1.1)" x 0.3 (0.2-0.5)", rotation angle = 91 (69-110) degrees
  Source aperture counts = 16.5 +/- 5.2
  Background aperture counts = 0.5
  Rate = 0.0008 +/- 0.0002

[Fri May  3 23:23:13 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 23:23:13 2013] Using photon index=1.80, rate=0.00076, arf fullrun_ccd7_acisf12860_pi14-548_pass1_cl_src3.arf
[Fri May  3 23:23:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May  3 23:23:13 2013] Updating source flux to 5.7e-15
[Fri May  3 23:23:13 2013] Source 3 has fewer than 100.000000 counts, skipping spectral fitting