[Sun Jun  9 05:28:20 2013] Detection parameters:
  Position = (132.5, 928.5) = 20 22 5.02 61 38 12.6
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 34.7 +/- 5.9
  Background counts = 0.3
  Rate = 0.007 +/- 0.001

[Sun Jun  9 05:28:20 2013] Off-axis axis estimate = 0.96'
[Sun Jun  9 05:29:01 2013] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 05:29:01 2013] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Jun  9 05:29:01 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.389
[Sun Jun  9 05:29:01 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Sun Jun  9 05:31:45 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass0_src1.ximg exists
[Sun Jun  9 05:31:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12853_pi14-548_cl_pass0_src1.csv
[Sun Jun  9 05:31:45 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Jun  9 05:31:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12853_pi14-548_cl_pass0_src1.csv
[Sun Jun  9 05:31:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12853_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12853_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:31:45 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  9 05:31:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12853_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 05:31:45 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  9 05:31:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12853_pi14-548_cl_pass0_tfrozen_src1.csv
[Sun Jun  9 05:31:45 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12853_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12853_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:31:46 2013] Spatial fit model total counts = 41.688700, observed total counts = 37.000000
[Sun Jun  9 05:31:46 2013] Offset between fit and detection position for source 1 = 0.767767 pixels
[Sun Jun  9 05:31:46 2013] 42.034320 total counts/ 6.087920 bgd. counts: snr = 14.568704
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.767767 pixels
  Position = (132.8, 929.2) = 20 22 5.03 61 38 12.7
  Extent = 0.3 (0.3-0.4)", rotation angle = 0
  Source counts = 35.9 +/- 6.5
  Background counts = 6.1
  Rate = 0.008 +/- 0.001
[Sun Jun  9 05:31:46 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:31:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:31:46 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:31:46 2013] Source does appear to be extended
[Sun Jun  9 05:31:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 05:31:52 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  9 05:31:52 2013] Initial guess for spatial extent in simple fitting = 0.33"
[Sun Jun  9 05:31:52 2013] source mask rpix=0.7, npix_max = 5, mask sum = 4, frac = 0.724
[Sun Jun  9 05:31:52 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 0.33"
[Sun Jun  9 05:34:30 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass1_src1.ximg exists
[Sun Jun  9 05:34:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12853_pi14-548_cl_pass1_src1.csv
[Sun Jun  9 05:34:30 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Jun  9 05:34:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12853_pi14-548_cl_pass1_src1.csv
[Sun Jun  9 05:34:30 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12853_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12853_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 05:34:30 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  9 05:34:30 2013] fullrun_ccd7_acisf12853_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  9 05:34:30 2013] Fit fullrun_ccd7_acisf12853_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  9 05:34:31 2013] Spatial fit model total counts = 39.131000, observed total counts = 37.000000
[Sun Jun  9 05:34:31 2013] Offset between fit and detection position for source 1 = 0.031859 pixels
[Sun Jun  9 05:34:31 2013] 38.924070 total counts/ 2.776470 bgd. counts: snr = 21.693667
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.031859 pixels
  Position = (132.8, 929.2) = 20 22 5.03 61 38 12.7
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source counts = 36.1 +/- 6.2
  Background counts = 2.8
  Rate = 0.008 +/- 0.001
[Sun Jun  9 05:34:31 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 05:34:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 05:34:31 2013] Assessing source extent using major axis lower bound
[Sun Jun  9 05:34:31 2013] Source does appear to be extended
[Sun Jun  9 05:34:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 05:34:37 2013] Writing source region out to fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1_src.reg
[Sun Jun  9 05:34:37 2013] Extracting stamp from image fullrun_ccd7_acisf12853_pi14-548_cl_sm2.00.img.gz, (116, 913) - (149, 945)
[Sun Jun  9 05:34:37 2013] Writing fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1.gif
[Sun Jun  9 05:34:38 2013] Size of ../../acisf12853/products/events/fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1_src.evt.gz[events] = 35 counts
[Sun Jun  9 05:34:38 2013] Mean chipx,y = (83.40, 459.69)
[Sun Jun  9 05:34:38 2013] Mean tdetx,y = (4000.40, 2161.69)
[Sun Jun  9 05:34:38 2013] chipx,y range = (65.00-100.00, 451.00-467.00)
[Sun Jun  9 05:34:38 2013] Size of ../../acisf12853/products/events/fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 3 counts
[Sun Jun  9 05:34:40 2013] Not generating rmf since there are only 36 counts
[Sun Jun  9 05:34:40 2013] arf not found, will run specextract
[Sun Jun  9 05:34:47 2013] ../../acisf12853/products/spectra/fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1.warf not found
[Sun Jun  9 05:34:47 2013] ../../acisf12853/products/spectra/fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1.wrmf not found
[Sun Jun  9 05:34:47 2013] Removal of ../../acisf12853/products/spectra/fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1.soff failed
[Sun Jun  9 05:35:12 2013] Spectrum 1 has only 36 counts, deleting rmf
[Sun Jun  9 05:35:12 2013] 108.595
[Sun Jun  9 05:35:13 2013] Updating aperture counts using extracted products
[Sun Jun  9 05:35:13 2013] Total counts from fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1_src.pi.gz = 35.00
[Sun Jun  9 05:35:13 2013] Total counts from fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1_bgd.pi.gz = 3.00
[Sun Jun  9 05:35:13 2013] Got source and background scale factors 0.000000, 0.000005
[Sun Jun  9 05:35:13 2013] User source parameters:
  Position = (132.8, 929.2) = 20 22 5.03 61 38 12.7
  Extent = 0.4 (0.3-0.4)", rotation angle = 0
  Source aperture counts = 34.7 +/- 7.0
  Background aperture counts = 0.3
  Rate = 0.007 +/- 0.001

[Sun Jun  9 05:35:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 05:35:13 2013] Using photon index=1.80, rate=0.00756, arf fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1.arf
[Sun Jun  9 05:35:13 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Jun  9 05:35:13 2013] Updating source flux to 1.3e-13
[Sun Jun  9 05:35:17 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  9 05:35:18 2013] acisf12853/analysis//spectral/fullrun_ccd7_acisf12853_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete