Source List

Observation details report
Detailed source parameters (including errors) in a comma-separated values file

Click on source number for detailed analysis, including spectral fits if applicable

data idnum idradec telescope instrument x y cnts cntserr rate rateerr SNR poisprob sigmaj sigmin incang offax cnts_soft cnts_hard hr hr_err ext var N_H flux vign flags
Report srcpi bgdpi arf 1 X011925.39+320829.2 chandra ccd6 163.238 743.686 13.6799 3.69863 0.00288486 0.00077998 17.8301 1 0.795088 0.795088 0 2.86797 F F 5.9e+20 3.00086e-14 1 dsx
Report srcpi bgdpi arf 1 X011944.52+321246.8 chandra ccd7 309.628 432.291 10.5191 3.24332 0.00221828 0.000683954 8.60501 1 0.683749 0.38651 122.797 3.03286 F F 5.83e+20 1.70037e-14 1 dsx
Report srcpi bgdpi arf 3 X011932.91+321018.9 chandra ccd7 608.7 131.1 4.68567 2.23608 0.000988114 0.000471544 3.83305 0.999094 0.492 0.492 159.183 0.464363 F F 5.88e+20 7.46465e-15 1 dx
Report srcpi bgdpi arf 2 X011939.44+321158.8 chandra ccd7 440.25 334.25 3.77676 2.00001 0.000796443 0.000421762 3.08952 0.995623 0.492 0.492 35.0084 1.73374 F F 5.85e+20 6.00129e-15 1 dx

counts and rate are bgd.-subtracted, based on simple spatial fitting (if done) or extracted counts from aperture otherwise (N.B., in either case aperture counts are given csv file).
cntserr, rateerr = Error on (source) counts and count rate, based on error in total counts
SNR = signal-to-noise ratio, computed using Nsrc/sqrt(Nbgd)
poisprob = Poisson probability of observing total counts given bgd. counts
sigmaj, sigmin = source extent (from detection output or spatial fitting) in units of arcsecs.
incang = position angle of source (inclination from x-axis)
cnts_soft = bgd.-subtracted counts in soft band (0.50 - 2.00 KeV, always taken directly from source aperture rather than model fitting)
cnts_hard = bgd.-subtracted counts in hard band (2.00 - 7.99 KeV, always taken directly from source aperture rather than model fitting)
hr, hr_err = hardness ratio ([cnts_hard-cnts_soft]/[cnts_hard+cnts_soft]) and error
ext = source extension flag: F = false (not extended), T = true (extended), A = asymetric (ratio of sigmaj/sigmin > 1 + x, where x = 0.5 by default)
var = variability flag: U = unknown, F = false (is not variable), T = true
N_H = Galactic column density as determined from LHEASOFT nh program
flux = flux determined from count rate using pimms (in the 0.30-8.00 keV bandpass for a power-law model with ph. index = 1.8)
vign = vignetting correction
Flags: d = detection parameters, s = simple spatial fitting parameters, b = simple spatial fitting failed, p = poor simple spatial fit, x = extracted events parameters, t = temporal anaylsis parameters, i = psf spatial fitting parameters, f = spectral fitting parameters, c = source is confused, u = user-defined source, v = detected source coincident with user-defined source, r = source is in region-of-interest