[Tue May  7 00:02:23 2013] Detection parameters:
  Position = (554.5, 334.9) = 7 13 47.55 43 50 40.3
  Extent = 0.5" x 0.5", rotation angle = 111 degrees
  Source counts = 14.3 +/- 4.0
  Background counts = 1.7
  Rate = 0.0004 +/- 0.0001

[Tue May  7 00:02:23 2013] Off-axis axis estimate = 2.46'
[Tue May  7 00:33:14 2013] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Tue May  7 00:33:14 2013] Initial guess for spatial extent in simple fitting = 0.49"
[Tue May  7 00:33:14 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.015
[Tue May  7 00:33:14 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 0.49"
[Tue May  7 00:35:33 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass0_src2.ximg exists
[Tue May  7 00:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12845_pi14-548_cl_pass0_src2.csv
[Tue May  7 00:35:33 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass0_src2_1.ximg exists
[Tue May  7 00:35:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12845_pi14-548_cl_pass0_src2.csv
[Tue May  7 00:35:33 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12845_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12845_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 00:35:33 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue May  7 00:35:33 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May  7 00:35:33 2013] Fit fullrun_ccd7_acisf12845_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue May  7 00:35:36 2013] Spatial fit model total counts = 18.025400, observed total counts = 20.000000
[Tue May  7 00:35:36 2013] Offset between fit and detection position for source 2 = 0.632197 pixels
[Tue May  7 00:35:36 2013] 17.699010 total counts/ 3.112610 bgd. counts: snr = 8.267720
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.632197 pixels
  Position = (555.1, 335.1) = 7 13 47.55 43 50 40.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 14.6 +/- 4.2
  Background counts = 3.1
  Rate = 0.0004 +/- 0.0001
[Tue May  7 00:35:36 2013] Vigneting correction estimate = 1.000000
[Tue May  7 00:35:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 00:35:36 2013] Assessing source extent using major axis lower bound
[Tue May  7 00:35:36 2013] Source does appear to be extended
[Tue May  7 00:35:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 01:05:37 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May  7 01:05:37 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Tue May  7 01:05:37 2013] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.603
[Tue May  7 01:05:37 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 0.39"
[Tue May  7 01:07:43 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass1_src2.ximg exists
[Tue May  7 01:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12845_pi14-548_cl_pass1_src2.csv
[Tue May  7 01:07:43 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass1_src2_1.ximg exists
[Tue May  7 01:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12845_pi14-548_cl_pass1_src2.csv
[Tue May  7 01:07:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12845_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12845_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 01:07:43 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue May  7 01:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12845_pi14-548_cl_pass1_tfrozen_src2.csv
[Tue May  7 01:07:43 2013] fullrun_ccd7_acisf12845_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May  7 01:07:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12845_pi14-548_cl_pass1_tfrozen_src2.csv
[Tue May  7 01:07:43 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12845_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12845_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  7 01:07:46 2013] Spatial fit model total counts = 4.751260, observed total counts = 20.000000
[Tue May  7 01:07:46 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May  7 01:07:46 2013] Vigneting correction estimate = 1.000000
[Tue May  7 01:07:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  7 01:07:46 2013] Assessing source extent using major axis lower bound
[Tue May  7 01:07:46 2013] Source does appear to be extended
[Tue May  7 01:07:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  7 01:11:04 2013] Writing source region out to fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2_src.reg
[Tue May  7 01:11:04 2013] Extracting stamp from image fullrun_ccd7_acisf12845_pi14-548_cl_sm2.00.img.gz, (537, 317) - (573, 353)
[Tue May  7 01:11:04 2013] Writing fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2.gif
[Tue May  7 01:11:40 2013] Size of ../../acisf12845/products/events/fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2_src.evt.gz[events] = 15 counts
[Tue May  7 01:11:40 2013] Mean chipx,y = (473.73, 564.00)
[Tue May  7 01:11:40 2013] Mean tdetx,y = (4390.73, 2266.00)
[Tue May  7 01:11:40 2013] chipx,y range = (455.00-494.00, 556.00-572.00)
[Tue May  7 01:11:40 2013] Size of ../../acisf12845/products/events/fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 8 counts
[Tue May  7 01:11:41 2013] Not generating rmf since there are only 14 counts
[Tue May  7 01:11:41 2013] arf not found, will run specextract
[Tue May  7 01:11:49 2013] ../../acisf12845/products/spectra/fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2.warf not found
[Tue May  7 01:11:49 2013] ../../acisf12845/products/spectra/fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2.wrmf not found
[Tue May  7 01:11:49 2013] Removal of ../../acisf12845/products/spectra/fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2.soff failed
[Tue May  7 01:11:56 2013] Spectrum 2 has only 15 counts, deleting rmf
[Tue May  7 01:11:56 2013] 119.241
[Tue May  7 01:11:58 2013] Updating aperture counts using extracted products
[Tue May  7 01:11:58 2013] Total counts from fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2_src.pi.gz = 15.00
[Tue May  7 01:11:58 2013] Total counts from fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2_bgd.pi.gz = 8.00
[Tue May  7 01:11:58 2013] Got source and background scale factors 0.000000, 0.000005
[Tue May  7 01:11:58 2013] User source parameters:
  Position = (555.1, 335.1) = 7 13 47.55 43 50 40.2
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source aperture counts = 14.3 +/- 5.0
  Background aperture counts = 0.7
  Rate = 0.0004 +/- 0.0001

[Tue May  7 01:11:58 2013] Calculating source flux in energy range 0.30-8.00
[Tue May  7 01:11:58 2013] Using photon index=1.80, rate=0.000385, arf fullrun_ccd7_acisf12845_pi14-548_pass1_cl_src2.arf
[Tue May  7 01:11:58 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Tue May  7 01:11:58 2013] Updating source flux to 5.7e-15
[Tue May  7 01:12:02 2013] Flag p found in src. 2 procflags, skipping spectral fitting
[Tue May  7 01:12:02 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting