[Sat Feb 18 08:43:04 2012] Detection parameters:
  Position = (441.8, 604.2) = 14 13 34.27 -65 23 5.6
  Extent = 1.2" x 0.6", rotation angle = 31 degrees
  Source counts = 29.8 +/- 5.7
  Background counts = 3.2
  Rate = 0.0008 +/- 0.0001

[Sat Feb 18 08:43:05 2012] Off-axis axis estimate = 4.03'
[Sat Feb 18 09:54:00 2012] Using EEF radius (= 0.84 ")to estimate initial spatial extent for simple fitting
[Sat Feb 18 09:54:00 2012] Initial guess for spatial extent in simple fitting = 0.84"
[Sat Feb 18 09:54:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.822
[Sat Feb 18 09:54:00 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 0.84"
[Sat Feb 18 10:55:09 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass0_src28.ximg exists
[Sat Feb 18 10:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12824_pi14-548_cl_pass0_src28.csv
[Sat Feb 18 10:55:09 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass0_src28_1.ximg exists
[Sat Feb 18 10:55:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12824_pi14-548_cl_pass0_src28.csv
[Sat Feb 18 10:55:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12824_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12824_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 10:55:09 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Sat Feb 18 10:55:09 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Sat Feb 18 10:55:09 2012] Fit fullrun_ccd7_acisf12824_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Feb 18 10:55:22 2012] Spatial fit model total counts = 34.201100, observed total counts = 34.000000
[Sat Feb 18 10:55:22 2012] Offset between fit and detection position for source 49 = 0.928007 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.928007 pixels
  Position = (442.5, 604.9) = 14 13 34.26 -65 23 5.5
  Extent = 1.1 (0.9-1.4)", rotation angle = 0
  Source counts = 33.3 +/- 5.8
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0001
[Sat Feb 18 10:55:22 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 10:55:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 10:55:22 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 10:55:22 2012] Source does appear to be extended
[Sat Feb 18 10:55:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 12:03:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 18 12:03:22 2012] Initial guess for spatial extent in simple fitting = 1.14"
[Sat Feb 18 12:03:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.938
[Sat Feb 18 12:03:22 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 1.14"
[Sat Feb 18 12:45:40 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass1_src28.ximg exists
[Sat Feb 18 12:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12824_pi14-548_cl_pass1_src28.csv
[Sat Feb 18 12:45:40 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass1_src28_1.ximg exists
[Sat Feb 18 12:45:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12824_pi14-548_cl_pass1_src28.csv
[Sat Feb 18 12:45:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12824_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12824_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 18 12:45:40 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Sat Feb 18 12:45:40 2012] fullrun_ccd7_acisf12824_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Sat Feb 18 12:45:40 2012] Fit fullrun_ccd7_acisf12824_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Sat Feb 18 12:45:51 2012] Spatial fit model total counts = 36.492500, observed total counts = 36.000000
[Sat Feb 18 12:45:51 2012] Offset between fit and detection position for source 49 = 0.427743 pixels
[Sat Feb 18 12:45:51 2012] 36.791680 total counts/ 8.379480 bgd. counts: snr = 9.815136
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.427743 pixels
  Position = (442.1, 604.6) = 14 13 34.28 -65 23 5.6
  Extent = 1.1 (0.8-1.5)", rotation angle = 0
  Source counts = 28.4 +/- 6.1
  Background counts = 8.4
  Rate = 0.0007 +/- 0.0002
[Sat Feb 18 12:45:51 2012] Vigneting correction estimate = 1.000000
[Sat Feb 18 12:45:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 18 12:45:51 2012] Assessing source extent using major axis lower bound
[Sat Feb 18 12:45:51 2012] Source does appear to be extended
[Sat Feb 18 12:45:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 18 13:05:25 2012] Writing source region out to fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49_src.reg
[Sat Feb 18 13:05:25 2012] Extracting stamp from image fullrun_ccd7_acisf12824_pi14-548_cl_sm2.00.img.gz, (392, 555) - (492, 654)
[Sat Feb 18 13:05:25 2012] Writing fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49.gif
[Sat Feb 18 13:13:17 2012] Size of ../../acisf12824/products/events/fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49_src.evt.gz[events] = 35 counts
[Sat Feb 18 13:13:17 2012] Mean chipx,y = (630.11, 695.34)
[Sat Feb 18 13:13:17 2012] Mean tdetx,y = (4547.11, 2397.34)
[Sat Feb 18 13:13:17 2012] chipx,y range = (607.00-649.00, 674.00-714.00)
[Sat Feb 18 13:13:17 2012] Size of ../../acisf12824/products/events/fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 76 counts
[Sat Feb 18 13:13:18 2012] Not generating rmf since there are only 28 counts
[Sat Feb 18 13:13:18 2012] arf not found, will run specextract
[Sat Feb 18 13:13:25 2012] ../../acisf12824/products/spectra/fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49.warf not found
[Sat Feb 18 13:13:25 2012] ../../acisf12824/products/spectra/fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49.wrmf not found
[Sat Feb 18 13:13:25 2012] Removal of ../../acisf12824/products/spectra/fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49.soff failed
[Sat Feb 18 13:15:36 2012] Spectrum 49 has only 28 counts, deleting rmf
[Sat Feb 18 13:15:36 2012] 222.856
[Sat Feb 18 13:15:40 2012] Updating aperture counts using extracted products
[Sat Feb 18 13:15:40 2012] Error reading totcts from fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49_src.pi.gz
[Sat Feb 18 13:15:40 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 18 13:15:40 2012] Using photon index=1.80, rate=0.000731, arf fullrun_ccd7_acisf12824_pi14-548_pass1_cl_src49.arf
[Sat Feb 18 13:15:40 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Feb 18 13:15:40 2012] Updating source flux to 7.5e-15
[Sat Feb 18 13:15:48 2012] Source 49 has fewer than 100.000000 counts, skipping spectral fitting