[Fri Feb 24 04:44:39 2012] Detection parameters:
  Position = (369.7, 1138.9) = 8 46 25.09 47 7 50.5
  Extent = 0.5" x 0.5", rotation angle = 63 degrees
  Source counts = 33.9 +/- 5.8
  Background counts = 0.1
  Rate = 0.007 +/- 0.001

[Fri Feb 24 04:44:40 2012] Off-axis axis estimate = 2.23'
[Fri Feb 24 04:47:40 2012] Using EEF radius (= 0.46 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 04:47:40 2012] Initial guess for spatial extent in simple fitting = 0.46"
[Fri Feb 24 04:47:40 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.107
[Fri Feb 24 04:47:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 0.46"
[Fri Feb 24 04:51:32 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 24 04:51:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12815_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 04:51:32 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 24 04:51:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12815_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 04:51:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12815_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12815_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 04:51:32 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 04:51:32 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 04:51:32 2012] Fit fullrun_ccd3_acisf12815_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 04:51:35 2012] Spatial fit model total counts = 33.517700, observed total counts = 35.000000
[Fri Feb 24 04:51:35 2012] Offset between fit and detection position for source 3 = 0.711745 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.711745 pixels
  Position = (370.2, 1139.4) = 8 46 25.09 47 7 50.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 33.5 +/- 5.8
  Background counts = 0.0
  Rate = 0.007 +/- 0.001
[Fri Feb 24 04:51:35 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 04:51:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 04:51:35 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 04:51:35 2012] Source does appear to be extended
[Fri Feb 24 04:51:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 04:53:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 04:53:32 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Fri Feb 24 04:53:32 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.215
[Fri Feb 24 04:53:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Fri Feb 24 04:57:36 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 24 04:57:36 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 24 04:57:36 2012] Fit fullrun_ccd3_acisf12815_pi14-548_cl_pass1_src1 appears to have run properly
[Fri Feb 24 04:57:36 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 04:57:36 2012] fullrun_ccd3_acisf12815_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 04:57:36 2012] Fit fullrun_ccd3_acisf12815_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 04:57:39 2012] Spatial fit model total counts = 32.914200, observed total counts = 35.000000
[Fri Feb 24 04:57:39 2012] Offset between fit and detection position for source 3 = 0.043653 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.043653 pixels
  Position = (370.2, 1139.4) = 8 46 25.09 47 7 50.5
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 32.8 +/- 5.7
  Background counts = 0.0
  Rate = 0.007 +/- 0.001
[Fri Feb 24 04:57:39 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 04:57:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 04:57:39 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 04:57:39 2012] Source does appear to be extended
[Fri Feb 24 04:57:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 05:02:07 2012] Writing source region out to fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3_src.reg
[Fri Feb 24 05:02:07 2012] Extracting stamp from image fullrun_ccd3_acisf12815_pi14-548_cl_sm2.00.img.gz, (350, 1120) - (390, 1159)
[Fri Feb 24 05:02:07 2012] Writing fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3.gif
[Fri Feb 24 05:02:08 2012] Size of ../../acisf12815/products/events/fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3_src.evt.gz[events] = 34 counts
[Fri Feb 24 05:02:08 2012] Mean chipx,y = (964.00, 769.32)
[Fri Feb 24 05:02:08 2012] Mean tdetx,y = (4362.68, 4025.00)
[Fri Feb 24 05:02:08 2012] chipx,y range = (948.00-981.00, 753.00-784.00)
[Fri Feb 24 05:02:08 2012] Size of ../../acisf12815/products/events/fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 1 counts
[Fri Feb 24 05:02:09 2012] Not generating rmf since there are only 32 counts
[Fri Feb 24 05:02:09 2012] arf not found, will run specextract
[Fri Feb 24 05:02:35 2012] ../../acisf12815/products/spectra/fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3.warf not found
[Fri Feb 24 05:02:35 2012] ../../acisf12815/products/spectra/fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3.wrmf not found
[Fri Feb 24 05:02:35 2012] Removal of ../../acisf12815/products/spectra/fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3.soff failed
[Fri Feb 24 05:04:13 2012] Spectrum 3 has only 33 counts, deleting rmf
[Fri Feb 24 05:04:13 2012] 201.695
[Fri Feb 24 05:04:33 2012] Updating aperture counts using extracted products
[Fri Feb 24 05:04:33 2012] Error reading totcts from fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Feb 24 05:04:33 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 05:04:33 2012] Using photon index=1.80, rate=0.00671, arf fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3.arf
[Fri Feb 24 05:04:33 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 05:04:33 2012] Updating source flux to 7.8e-14
[Fri Feb 24 05:04:37 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 24 05:04:38 2012] acisf12815/analysis//spectral/fullrun_ccd3_acisf12815_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete