[Fri Sep 23 19:18:49 2011] Detection parameters:
  Position = (210.8, 868.7) = 8 35 24.60 -45 7 21.3
  Extent = 1.3" x 0.8", rotation angle = 36 degrees
  Source counts = 20.4 +/- 5.5
  Background counts = 9.6
  Rate = 0.002 +/- 0.0005

[Fri Sep 23 19:18:50 2011] Off-axis axis estimate = 5.08'
[Fri Sep 23 19:19:31 2011] Using EEF radius (= 1.21 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 19:19:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 19:19:31 2011] Initial guess for spatial extent in simple fitting = 1.21"
[Fri Sep 23 19:19:31 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Fri Sep 23 19:19:31 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 1.21"
[Fri Sep 23 19:19:31 2011] fullrun_ccd7_acisf00128_pi14-548_cl_pass0_src17.ximg exists
[Fri Sep 23 19:19:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf00128_pi14-548_cl_pass0_src17.csv
[Fri Sep 23 19:19:31 2011] fullrun_ccd7_acisf00128_pi14-548_cl_pass0_src17_1.ximg exists
[Fri Sep 23 19:19:31 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf00128_pi14-548_cl_pass0_src17.csv
[Fri Sep 23 19:19:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00128_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00128_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:19:32 2011] fullrun_ccd7_acisf00128_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Fri Sep 23 19:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00128_pi14-548_cl_pass0_tfrozen_src17.csv
[Fri Sep 23 19:19:32 2011] fullrun_ccd7_acisf00128_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Sep 23 19:19:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00128_pi14-548_cl_pass0_tfrozen_src17.csv
[Fri Sep 23 19:19:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00128_pi14-548_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00128_pi14-548_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 19:19:37 2011] Spatial fit model total counts = 27.519300, observed total counts = 31.000000
[Fri Sep 23 19:19:37 2011] Offset between fit and detection position for source 17 = 1.076928 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.076928 pixels
  Position = (209.7, 868.9) = 8 35 24.67 -45 7 21.4
  Extent = 1.3 (0.9-1.7)", rotation angle = 0
  Source counts = 28.8 +/- 5.4
  Background counts = 0.0
  Rate = 0.003 +/- 0.0005
[Fri Sep 23 19:19:37 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 19:19:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 19:19:37 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 19:19:37 2011] Source does appear to be extended
[Fri Sep 23 19:19:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 19:19:37 2011] Deleting source due to low Poisson probability 0.8