[Fri Oct 21 23:02:32 2011] Detection parameters:
  Position = (316.7, 853.0) = 23 13 1.58 5 21 36.2
  Extent = 1.0" x 0.6", rotation angle = 74 degrees
  Source counts = 23.2 +/- 4.9
  Background counts = 0.8
  Rate = 0.003 +/- 0.0006

[Fri Oct 21 23:02:33 2011] Off-axis axis estimate = 5.32'
[Fri Oct 21 23:02:55 2011] Using EEF radius (= 1.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 23:02:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 23:02:55 2011] Initial guess for spatial extent in simple fitting = 1.31"
[Fri Oct 21 23:02:55 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.046
[Fri Oct 21 23:02:55 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 1.31"
[Fri Oct 21 23:02:55 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct 21 23:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12747_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 23:02:55 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct 21 23:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12747_pi14-548_cl_pass0_src3.csv
[Fri Oct 21 23:02:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12747_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12747_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 23:02:55 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct 21 23:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12747_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 21 23:02:55 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct 21 23:02:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12747_pi14-548_cl_pass0_tfrozen_src3.csv
[Fri Oct 21 23:02:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12747_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12747_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 23:02:59 2011] Spatial fit model total counts = 16.282500, observed total counts = 30.000000
[Fri Oct 21 23:02:59 2011] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 21 23:02:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 23:02:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 23:02:59 2011] Assessing source extent using major
[Fri Oct 21 23:02:59 2011] Source does appear to be extended
[Fri Oct 21 23:02:59 2011] Computing asymmetry using major and minor axis, asym = 1.66
[Fri Oct 21 23:02:59 2011] Source is asymmetric
[Fri Oct 21 23:03:07 2011] Using EEF radius (= 1.31 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 23:03:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 23:03:07 2011] Initial guess for spatial extent in simple fitting = 1.31"
[Fri Oct 21 23:03:07 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.046
[Fri Oct 21 23:03:07 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.31"
[Fri Oct 21 23:03:07 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct 21 23:03:08 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct 21 23:03:08 2011] Fit fullrun_ccd7_acisf12747_pi14-548_cl_pass1_src3 appears to have run properly
[Fri Oct 21 23:03:08 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct 21 23:03:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12747_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 21 23:03:08 2011] fullrun_ccd7_acisf12747_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct 21 23:03:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12747_pi14-548_cl_pass1_tfrozen_src3.csv
[Fri Oct 21 23:03:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12747_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12747_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 23:03:10 2011] Source 4 is offset by -6.614593 and 7.239838 pixels which is larger than
2 X fitted extent = 7.281341 x 0.910167, not incorporating fit results
[Fri Oct 21 23:03:10 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 23:03:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 23:03:10 2011] Assessing source extent using major
[Fri Oct 21 23:03:10 2011] Source does appear to be extended
[Fri Oct 21 23:03:10 2011] Computing asymmetry using major and minor axis, asym = 1.66
[Fri Oct 21 23:03:10 2011] Source is asymmetric
[Fri Oct 21 23:03:36 2011] Not overwriting source region fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 21 23:03:36 2011] Extracting stamp from image fullrun_ccd7_acisf12747_pi14-548_cl_sm2.00.img.gz, (273, 809) - (360, 896)
[Fri Oct 21 23:03:36 2011] Writing fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4.gif
[Fri Oct 21 23:03:43 2011] ../../acisf12747/products/events/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_src.evt and ../../acisf12747/products/events/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 21 23:03:43 2011] Size of ../../acisf12747/products/events/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_src.evt.gz[events] = 24 counts
[Fri Oct 21 23:03:43 2011] Mean chipx,y = (790.42, 253.21)
[Fri Oct 21 23:03:43 2011] Mean tdetx,y = (4707.42, 1955.21)
[Fri Oct 21 23:03:43 2011] chipx,y range = (775.00-810.00, 238.00-275.00)
[Fri Oct 21 23:03:43 2011] Size of ../../acisf12747/products/events/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 11 counts
[Fri Oct 21 23:03:43 2011] ../../acisf12747/products/images/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_src.img and ../../acisf12747/products/images/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 21 23:03:43 2011] ../../acisf12747/products/spectra/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_src.pi and ../../acisf12747/products/spectra/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 21 23:03:43 2011] Not generating rmf since there are only 23 counts
[Fri Oct 21 23:03:45 2011] ../../acisf12747/products/lightcurves/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_src.lc and ../../acisf12747/products/lightcurves/fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 21 23:03:58 2011] 218.417
[Fri Oct 21 23:03:59 2011] Updating aperture counts using extracted products
[Fri Oct 21 23:03:59 2011] Error reading totcts from fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 21 23:03:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 23:03:59 2011] Using photon index=1.80, rate=0.00292, arf fullrun_ccd7_acisf12747_pi14-548_pass1_cl_src4.arf
[Fri Oct 21 23:03:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 23:03:59 2011] Updating source flux to 2.3e-14
[Fri Oct 21 23:04:04 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting