[Mon Oct 24 20:10:39 2011] Detection parameters:
  Position = (517.7, 477.6) = 8 15 28.01 -3 8 25.8
  Extent = 0.5" x 0.5", rotation angle = 153 degrees
  Source counts = 195.2 +/- 15.3
  Background counts = 39.8
  Rate = 0.02 +/- 0.002

[Mon Oct 24 20:10:40 2011] Off-axis axis estimate = 0.32'
[Mon Oct 24 20:11:07 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct 24 20:11:07 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Oct 24 20:11:07 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.292
[Mon Oct 24 20:11:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.40"
[Mon Oct 24 20:11:08 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 24 20:11:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12729_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 20:11:08 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 24 20:11:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12729_pi14-548_cl_pass0_src1.csv
[Mon Oct 24 20:11:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12729_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12729_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 20:11:08 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 24 20:11:08 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 24 20:11:08 2011] Fit fullrun_ccd7_acisf12729_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 24 20:11:11 2011] Spatial fit model total counts = 391.989000, observed total counts = 392.000000
[Mon Oct 24 20:11:11 2011] Offset between fit and detection position for source 1 = 2.470514 pixels
[Mon Oct 24 20:11:11 2011] 394.672000 total counts/ 314.391000 bgd. counts: snr = 4.527701
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.470514 pixels
  Position = (519.7, 479.1) = 8 15 27.96 -3 8 25.3
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 80.3 +/- 19.9
  Background counts = 314.4
  Rate = 0.01 +/- 0.002
[Mon Oct 24 20:11:11 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 20:11:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 20:11:11 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 20:11:11 2011] Source does appear to be extended
[Mon Oct 24 20:11:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 20:11:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 24 20:11:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 24 20:11:21 2011] Initial guess for spatial extent in simple fitting = 1.49"
[Mon Oct 24 20:11:21 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.990
[Mon Oct 24 20:11:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.49"
[Mon Oct 24 20:11:22 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 24 20:11:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12729_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 20:11:22 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 24 20:11:22 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12729_pi14-548_cl_pass1_src1.csv
[Mon Oct 24 20:11:22 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12729_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12729_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 24 20:11:22 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 24 20:11:22 2011] fullrun_ccd7_acisf12729_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 24 20:11:22 2011] Fit fullrun_ccd7_acisf12729_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 24 20:11:24 2011] Warning, spatial fit 1 centroid is now closest to src. 10
[Mon Oct 24 20:11:24 2011] Source 1 in spatial fitting is no longer close to this source
[Mon Oct 24 20:11:24 2011] Vigneting correction estimate = 1.000000
[Mon Oct 24 20:11:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 24 20:11:24 2011] Assessing source extent using major axis lower bound
[Mon Oct 24 20:11:24 2011] Source does appear to be extended
[Mon Oct 24 20:11:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 24 20:12:03 2011] Not overwriting source region fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_src.reg
[Mon Oct 24 20:12:03 2011] Extracting stamp from image fullrun_ccd7_acisf12729_pi14-548_cl_sm2.00.img.gz, (452, 411) - (588, 547)
[Mon Oct 24 20:12:03 2011] Writing fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1.gif
[Mon Oct 24 20:12:04 2011] ../../acisf12729/products/events/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_src.evt and ../../acisf12729/products/events/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Oct 24 20:12:04 2011] Size of ../../acisf12729/products/events/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_src.evt.gz[events] = 619 counts
[Mon Oct 24 20:12:04 2011] Mean chipx,y = (226.51, 519.19)
[Mon Oct 24 20:12:04 2011] Mean tdetx,y = (4143.51, 2221.19)
[Mon Oct 24 20:12:04 2011] chipx,y range = (200.00-254.00, 493.00-546.00)
[Mon Oct 24 20:12:04 2011] Size of ../../acisf12729/products/events/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1097 counts
[Mon Oct 24 20:12:04 2011] ../../acisf12729/products/images/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_src.img and ../../acisf12729/products/images/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Oct 24 20:12:04 2011] ../../acisf12729/products/spectra/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_src.pi and ../../acisf12729/products/spectra/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Oct 24 20:12:04 2011] Not generating rmf since there are only 80 counts
[Mon Oct 24 20:12:07 2011] ../../acisf12729/products/lightcurves/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_src.lc and ../../acisf12729/products/lightcurves/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Oct 24 20:12:13 2011] 235.731
[Mon Oct 24 20:12:14 2011] Updating aperture counts using extracted products
[Mon Oct 24 20:12:14 2011] Error reading totcts from fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Oct 24 20:12:14 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 24 20:12:14 2011] Using photon index=1.80, rate=0.0101, arf fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1.arf
[Mon Oct 24 20:12:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 24 20:12:14 2011] Updating source flux to 7.6e-14
[Mon Oct 24 20:12:19 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 24 20:12:23 2011] acisf12729/analysis//spectral/fullrun_ccd7_acisf12729_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete