[Fri Oct 14 13:34:39 2011] Detection parameters:
  Position = (877.5, 537.5) = 4 52 52.84 52 4 47.3
  Extent = 0.5" x 0.5", rotation angle = 96 degrees
  Source counts = 29.2 +/- 5.7
  Background counts = 2.8
  Rate = 0.004 +/- 0.0007

[Fri Oct 14 13:34:39 2011] Off-axis axis estimate = 0.31'
[Fri Oct 14 13:35:15 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:35:15 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Fri Oct 14 13:35:15 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.289
[Fri Oct 14 13:35:15 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.40"
[Fri Oct 14 13:35:17 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 14 13:35:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12726_pi14-548_cl_pass0_src2.csv
[Fri Oct 14 13:35:17 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 14 13:35:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12726_pi14-548_cl_pass0_src2.csv
[Fri Oct 14 13:35:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12726_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12726_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 13:35:17 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 14 13:35:17 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 14 13:35:17 2011] Fit fullrun_ccd7_acisf12726_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 14 13:35:20 2011] Spatial fit model total counts = 38.858900, observed total counts = 39.000000
[Fri Oct 14 13:35:20 2011] Offset between fit and detection position for source 2 = 0.825693 pixels
[Fri Oct 14 13:35:20 2011] 39.784500 total counts/ 15.405100 bgd. counts: snr = 6.211418
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.825693 pixels
  Position = (878.2, 538.0) = 4 52 52.83 52 4 47.3
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 24.4 +/- 6.3
  Background counts = 15.4
  Rate = 0.003 +/- 0.0008
[Fri Oct 14 13:35:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:35:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:35:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 13:35:20 2011] Source does appear to be extended
[Fri Oct 14 13:35:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 13:35:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:35:33 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Oct 14 13:35:33 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.777
[Fri Oct 14 13:35:33 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.44"
[Fri Oct 14 13:35:35 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 14 13:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12726_pi14-548_cl_pass1_src2.csv
[Fri Oct 14 13:35:35 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 14 13:35:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12726_pi14-548_cl_pass1_src2.csv
[Fri Oct 14 13:35:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12726_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12726_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 13:35:36 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 14 13:35:36 2011] fullrun_ccd7_acisf12726_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 14 13:35:36 2011] Fit fullrun_ccd7_acisf12726_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 14 13:35:39 2011] Spatial fit model total counts = 41.997500, observed total counts = 42.000000
[Fri Oct 14 13:35:39 2011] Offset between fit and detection position for source 2 = 0.006633 pixels
[Fri Oct 14 13:35:39 2011] 42.921300 total counts/ 18.508300 bgd. counts: snr = 5.674634
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.006633 pixels
  Position = (878.2, 538.0) = 4 52 52.83 52 4 47.3
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 24.4 +/- 6.6
  Background counts = 18.5
  Rate = 0.003 +/- 0.0008
[Fri Oct 14 13:35:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:35:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:35:39 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 13:35:39 2011] Source does appear to be extended
[Fri Oct 14 13:35:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 13:36:11 2011] Not overwriting source region fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_src.reg
[Fri Oct 14 13:36:11 2011] Extracting stamp from image fullrun_ccd7_acisf12726_pi14-548_cl_sm2.00.img.gz, (858, 518) - (898, 558)
[Fri Oct 14 13:36:11 2011] Writing fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2.gif
[Fri Oct 14 13:36:16 2011] ../../acisf12726/products/events/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_src.evt and ../../acisf12726/products/events/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Oct 14 13:36:16 2011] Size of ../../acisf12726/products/events/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_src.evt.gz[events] = 29 counts
[Fri Oct 14 13:36:16 2011] Mean chipx,y = (225.86, 508.55)
[Fri Oct 14 13:36:16 2011] Mean tdetx,y = (4142.86, 2210.55)
[Fri Oct 14 13:36:16 2011] chipx,y range = (209.00-242.00, 490.00-526.00)
[Fri Oct 14 13:36:16 2011] Size of ../../acisf12726/products/events/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 26 counts
[Fri Oct 14 13:36:16 2011] ../../acisf12726/products/images/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_src.img and ../../acisf12726/products/images/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Oct 14 13:36:16 2011] ../../acisf12726/products/spectra/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_src.pi and ../../acisf12726/products/spectra/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Oct 14 13:36:16 2011] Not generating rmf since there are only 24 counts
[Fri Oct 14 13:36:19 2011] ../../acisf12726/products/lightcurves/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_src.lc and ../../acisf12726/products/lightcurves/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Oct 14 13:36:48 2011] 235.67
[Fri Oct 14 13:36:50 2011] Updating aperture counts using extracted products
[Fri Oct 14 13:36:50 2011] Error reading totcts from fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Oct 14 13:36:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 13:36:50 2011] Using photon index=1.80, rate=0.00307, arf fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2.arf
[Fri Oct 14 13:36:50 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 13:36:50 2011] Updating source flux to 2.8e-14
[Fri Oct 14 13:36:57 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 13:36:58 2011] acisf12726/analysis//spectral/fullrun_ccd7_acisf12726_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete