[Fri Oct 14 13:34:38 2011] Detection parameters:
  Position = (395.3, 717.6) = 4 52 24.41 52 4 48.7
  Extent = 1.1" x 0.5", rotation angle = 27 degrees
  Source counts = 13.5 +/- 3.7
  Background counts = 0.5
  Rate = 0.002 +/- 0.0005

[Fri Oct 14 13:34:38 2011] Off-axis axis estimate = 4.08'
[Fri Oct 14 13:35:14 2011] Using EEF radius (= 0.85 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:35:14 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 13:35:14 2011] Initial guess for spatial extent in simple fitting = 0.85"
[Fri Oct 14 13:35:14 2011] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.250
[Fri Oct 14 13:35:14 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.85"
[Fri Oct 14 13:35:15 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 13:35:15 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 13:35:15 2011] Fit fullrun_ccd6_acisf12726_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Oct 14 13:35:15 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 13:35:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12726_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Oct 14 13:35:15 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 13:35:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12726_pi14-548_cl_pass0_tfrozen_src1.csv
[Fri Oct 14 13:35:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12726_pi14-548_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12726_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 13:35:19 2011] Spatial fit model total counts = 15.187600, observed total counts = 15.000000
[Fri Oct 14 13:35:19 2011] Offset between fit and detection position for source 4 = 0.217148 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.217148 pixels
  Position = (395.1, 717.4) = 4 52 24.45 52 4 48.3
  Extent = 1.5 (1.0-1.7)" x 0.6 (0.3-0.8)", rotation angle = 143 (123-162) degrees
  Source counts = 15.4 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Fri Oct 14 13:35:19 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:35:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:35:19 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 13:35:19 2011] Source does appear to be extended
[Fri Oct 14 13:35:19 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.32
[Fri Oct 14 13:35:32 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 13:35:32 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 13:35:32 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Fri Oct 14 13:35:32 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Fri Oct 14 13:35:32 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.01"
[Fri Oct 14 13:35:33 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 13:35:33 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 13:35:33 2011] Fit fullrun_ccd6_acisf12726_pi14-548_cl_pass1_src1 appears to have run properly
[Fri Oct 14 13:35:33 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 13:35:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12726_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct 14 13:35:33 2011] fullrun_ccd6_acisf12726_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 13:35:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12726_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct 14 13:35:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12726_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12726_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 13:35:39 2011] Spatial fit model total counts = 15.893500, observed total counts = 15.000000
[Fri Oct 14 13:35:39 2011] Offset between fit and detection position for source 4 = 0.093500 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.093500 pixels
  Position = (395.2, 717.5) = 4 52 24.44 52 4 48.4
  Extent = 1.5 (1.1-2.0)" x 0.6 (0.4-0.8)", rotation angle = 146 (125-159) degrees
  Source counts = 16.0 +/- 4.0
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Fri Oct 14 13:35:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 13:35:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 13:35:39 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 13:35:39 2011] Source does appear to be extended
[Fri Oct 14 13:35:39 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.37
[Fri Oct 14 13:36:01 2011] Not overwriting source region fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 14 13:36:01 2011] Extracting stamp from image fullrun_ccd6_acisf12726_pi14-548_cl_sm2.00.img.gz, (326, 649) - (464, 786)
[Fri Oct 14 13:36:01 2011] Writing fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4.gif
[Fri Oct 14 13:36:01 2011] ../../acisf12726/products/events/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_src.evt and ../../acisf12726/products/events/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 14 13:36:01 2011] Size of ../../acisf12726/products/events/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_src.evt.gz[events] = 13 counts
[Fri Oct 14 13:36:01 2011] Mean chipx,y = (746.31, 608.69)
[Fri Oct 14 13:36:01 2011] Mean tdetx,y = (3621.31, 2310.69)
[Fri Oct 14 13:36:01 2011] chipx,y range = (730.00-765.00, 594.00-622.00)
[Fri Oct 14 13:36:01 2011] Size of ../../acisf12726/products/events/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 27 counts
[Fri Oct 14 13:36:01 2011] ../../acisf12726/products/images/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_src.img and ../../acisf12726/products/images/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 14 13:36:01 2011] ../../acisf12726/products/spectra/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_src.pi and ../../acisf12726/products/spectra/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 14 13:36:01 2011] Not generating rmf since there are only 15 counts
[Fri Oct 14 13:36:05 2011] ../../acisf12726/products/lightcurves/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_src.lc and ../../acisf12726/products/lightcurves/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 14 13:36:11 2011] 198.388
[Fri Oct 14 13:36:49 2011] Updating aperture counts using extracted products
[Fri Oct 14 13:36:49 2011] Error reading totcts from fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 14 13:36:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 13:36:49 2011] Using photon index=1.80, rate=0.00201, arf fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4.arf
[Fri Oct 14 13:36:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 13:36:49 2011] Updating source flux to 2.4e-14
[Fri Oct 14 13:36:56 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 13:36:57 2011] acisf12726/analysis//spectral/fullrun_ccd6_acisf12726_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete