[Wed Oct 19 10:02:33 2011] Detection parameters:
  Position = (892.9, 442.4) = 2 20 35.40 -1 58 55.2
  Extent = 0.6" x 0.5", rotation angle = 144 degrees
  Source counts = 41.9 +/- 6.6
  Background counts = 1.1
  Rate = 0.005 +/- 0.0008

[Wed Oct 19 10:02:34 2011] Off-axis axis estimate = 5.42'
[Wed Oct 19 10:03:01 2011] Using EEF radius (= 1.36 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 10:03:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 10:03:01 2011] Initial guess for spatial extent in simple fitting = 1.36"
[Wed Oct 19 10:03:01 2011] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.987
[Wed Oct 19 10:03:01 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.36"
[Wed Oct 19 10:03:02 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct 19 10:03:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12722_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 10:03:02 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct 19 10:03:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12722_pi14-548_cl_pass0_src2.csv
[Wed Oct 19 10:03:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12722_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12722_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 10:03:02 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct 19 10:03:02 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct 19 10:03:02 2011] Fit fullrun_ccd7_acisf12722_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct 19 10:03:06 2011] Spatial fit model total counts = 48.690800, observed total counts = 49.000000
[Wed Oct 19 10:03:06 2011] Offset between fit and detection position for source 2 = 0.915992 pixels
[Wed Oct 19 10:03:06 2011] 48.789700 total counts/ 11.872800 bgd. counts: snr = 10.713926
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.915992 pixels
  Position = (893.2, 443.2) = 2 20 35.41 -1 58 55.0
  Extent = 1.2 (0.7-1.7)", rotation angle = 0
  Source counts = 36.9 +/- 7.0
  Background counts = 11.9
  Rate = 0.005 +/- 0.0009
[Wed Oct 19 10:03:06 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 10:03:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 10:03:06 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 10:03:06 2011] Source does appear to be extended
[Wed Oct 19 10:03:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 10:03:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 10:03:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 10:03:18 2011] Initial guess for spatial extent in simple fitting = 1.16"
[Wed Oct 19 10:03:18 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.107
[Wed Oct 19 10:03:18 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.16"
[Wed Oct 19 10:03:19 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct 19 10:03:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12722_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 10:03:19 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct 19 10:03:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12722_pi14-548_cl_pass1_src2.csv
[Wed Oct 19 10:03:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12722_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12722_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 10:03:19 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct 19 10:03:19 2011] fullrun_ccd7_acisf12722_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct 19 10:03:19 2011] Fit fullrun_ccd7_acisf12722_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct 19 10:03:23 2011] Spatial fit model total counts = 46.318800, observed total counts = 47.000000
[Wed Oct 19 10:03:23 2011] Offset between fit and detection position for source 2 = 0.607653 pixels
[Wed Oct 19 10:03:23 2011] 45.768180 total counts/ 4.380780 bgd. counts: snr = 19.773904
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.607653 pixels
  Position = (893.4, 442.6) = 2 20 35.40 -1 58 55.3
  Extent = 1.2 (0.8-1.5)", rotation angle = 0
  Source counts = 41.4 +/- 6.8
  Background counts = 4.4
  Rate = 0.005 +/- 0.0009
[Wed Oct 19 10:03:23 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 10:03:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 10:03:23 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 10:03:23 2011] Source does appear to be extended
[Wed Oct 19 10:03:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 10:04:16 2011] Not overwriting source region fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 19 10:04:16 2011] Extracting stamp from image fullrun_ccd7_acisf12722_pi14-548_cl_sm2.00.img.gz, (837, 386) - (950, 499)
[Wed Oct 19 10:04:16 2011] Writing fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2.gif
[Wed Oct 19 10:04:20 2011] ../../acisf12722/products/events/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_src.evt and ../../acisf12722/products/events/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 19 10:04:20 2011] Size of ../../acisf12722/products/events/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_src.evt.gz[events] = 50 counts
[Wed Oct 19 10:04:20 2011] Mean chipx,y = (835.08, 618.22)
[Wed Oct 19 10:04:20 2011] Mean tdetx,y = (4752.08, 2320.22)
[Wed Oct 19 10:04:20 2011] chipx,y range = (816.00-854.00, 600.00-641.00)
[Wed Oct 19 10:04:20 2011] Size of ../../acisf12722/products/events/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 19 counts
[Wed Oct 19 10:04:20 2011] ../../acisf12722/products/images/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_src.img and ../../acisf12722/products/images/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 19 10:04:20 2011] ../../acisf12722/products/spectra/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_src.pi and ../../acisf12722/products/spectra/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 19 10:04:20 2011] Not generating rmf since there are only 41 counts
[Wed Oct 19 10:04:22 2011] ../../acisf12722/products/lightcurves/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_src.lc and ../../acisf12722/products/lightcurves/fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 19 10:04:47 2011] 217.345
[Wed Oct 19 10:04:49 2011] Updating aperture counts using extracted products
[Wed Oct 19 10:04:49 2011] Error reading totcts from fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 19 10:04:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 10:04:49 2011] Using photon index=1.80, rate=0.00521, arf fullrun_ccd7_acisf12722_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 10:04:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 10:04:49 2011] Updating source flux to 4.1e-14
[Wed Oct 19 10:04:54 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting