[Tue May 7 08:37:27 2013] Detection parameters: Position = (231.1, 67.4) = 16 53 3.30 2 31 16.8 Extent = 1.0" x 0.9", rotation angle = 27 degrees Source counts = 38.9 +/- 7.7 Background counts = 20.1 Rate = 0.0003 +/- 5e-05 [Tue May 7 08:37:27 2013] Off-axis axis estimate = 7.47' [Tue May 7 08:42:49 2013] Using EEF radius (= 2.47 ")to estimate initial spatial extent for simple fitting [Tue May 7 08:42:49 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue May 7 08:42:49 2013] Initial guess for spatial extent in simple fitting = 2.47" [Tue May 7 08:42:49 2013] source mask rpix=5.0, npix_max = 121, mask sum = 121, frac = 0.992 [Tue May 7 08:42:49 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 2.47" [Tue May 7 10:01:02 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass0_src1.ximg exists [Tue May 7 10:01:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12713_pi14-548_cl_pass0_src1.csv [Tue May 7 10:01:02 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass0_src1_1.ximg exists [Tue May 7 10:01:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12713_pi14-548_cl_pass0_src1.csv [Tue May 7 10:01:02 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf12713_pi14-548_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf12713_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 10:01:02 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass0_tfrozen_src1.ximg exists [Tue May 7 10:01:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12713_pi14-548_cl_pass0_tfrozen_src1.csv [Tue May 7 10:01:02 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists [Tue May 7 10:01:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12713_pi14-548_cl_pass0_tfrozen_src1.csv [Tue May 7 10:01:02 2013] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf12713_pi14-548_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf12713_pi14-548_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 7 14:19:47 2013] Warning, spatial fit 1 centroid is now closest to src. 5 [Tue May 7 14:19:47 2013] Source 1 is offset by 2.088902 and 3.438686 pixels which is larger than 2 X fitted extent = 2.375703 x 2.375703, not incorporating fit results [Tue May 7 14:19:47 2013] Vigneting correction estimate = 1.000000 [Tue May 7 14:19:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 14:19:47 2013] Assessing source extent using major [Tue May 7 14:19:47 2013] Source does appear to be extended [Tue May 7 14:19:47 2013] Computing asymmetry using major and minor axis, asym = 1.11 [Tue May 7 14:20:21 2013] Using EEF radius (= 2.47 ")to estimate initial spatial extent for simple fitting [Tue May 7 14:20:21 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue May 7 14:20:21 2013] Initial guess for spatial extent in simple fitting = 2.47" [Tue May 7 14:20:21 2013] source mask rpix=5.0, npix_max = 121, mask sum = 121, frac = 0.992 [Tue May 7 14:20:21 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 2.47" [Tue May 7 15:04:25 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass1_src1.ximg exists [Tue May 7 15:04:25 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass1_src1_1.ximg exists [Tue May 7 15:04:25 2013] Fit fullrun_ccd2_acisf12713_pi14-548_cl_pass1_src1 appears to have run properly [Tue May 7 15:04:25 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass1_tfrozen_src1.ximg exists [Tue May 7 15:04:25 2013] fullrun_ccd2_acisf12713_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists [Tue May 7 15:04:25 2013] Fit fullrun_ccd2_acisf12713_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly [Tue May 7 17:50:26 2013] Spatial fit model total counts = 117.945000, observed total counts = 115.000000 [Tue May 7 17:50:26 2013] Offset between fit and detection position for source 1 = 1.078665 pixels [Tue May 7 17:50:26 2013] 119.125100 total counts/ 73.521500 bgd. counts: snr = 5.318534 Spatial fit parameters: Offset between fit and detection position for source 1 = 1.078665 pixels Position = (231.4, 68.5) = 16 53 3.31 2 31 17.1 Extent = 2.4 (1.7-3.5)" x 1.4 (1.0-2.1)", rotation angle = 91 (240-303) degrees Source counts = 45.6 +/- 10.9 Background counts = 73.5 Rate = 0.0003 +/- 8e-05 [Tue May 7 17:50:26 2013] Vigneting correction estimate = 1.000000 [Tue May 7 17:50:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 7 17:50:26 2013] Assessing source extent using major axis lower bound [Tue May 7 17:50:26 2013] Source does appear to be extended [Tue May 7 17:50:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.83 [Tue May 7 17:50:56 2013] Writing source region out to fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1_src.reg [Tue May 7 17:50:56 2013] Extracting stamp from image fullrun_ccd2_acisf12713_pi14-548_cl_sm2.00.img.gz, (121, 0) - (342, 179) [Tue May 7 17:50:56 2013] Writing fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1.gif [Tue May 7 17:50:58 2013] Size of ../../acisf12713/products/events/fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1_src.evt.gz[events] = 81 counts [Tue May 7 17:50:58 2013] Mean chipx,y = (969.07, 1005.86) [Tue May 7 17:50:58 2013] Mean tdetx,y = (4066.86, 3116.93) [Tue May 7 17:50:58 2013] chipx,y range = (936.00-994.00, 983.00-1023.00) [Tue May 7 17:50:58 2013] Size of ../../acisf12713/products/events/fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 314 counts [Tue May 7 17:50:59 2013] Not generating rmf since there are only 45 counts [Tue May 7 17:50:59 2013] arf not found, will run specextract [Tue May 7 17:51:29 2013] ../../acisf12713/products/spectra/fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1.warf not found [Tue May 7 17:51:29 2013] ../../acisf12713/products/spectra/fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1.wrmf not found [Tue May 7 17:51:29 2013] Removal of ../../acisf12713/products/spectra/fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1.soff failed [Tue May 7 17:57:52 2013] Spectrum 1 has only 46 counts, deleting rmf [Tue May 7 17:57:52 2013] 112.633 [Tue May 7 18:38:15 2013] Updating aperture counts using extracted products [Tue May 7 18:38:15 2013] Total counts from fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1_src.pi.gz = 81.00 [Tue May 7 18:38:15 2013] Total counts from fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1_bgd.pi.gz = 314.00 [Tue May 7 18:38:15 2013] Got source and background scale factors 0.000011, 0.000212 [Tue May 7 18:38:15 2013] User source parameters: Position = (231.4, 68.5) = 16 53 3.31 2 31 17.1 Extent = 2.4 (1.7-3.5)" x 1.4 (1.0-2.1)", rotation angle = 91 (240-303) degrees Source aperture counts = 65.1 +/- 10.0 Background aperture counts = 15.9 Rate = 0.0004 +/- 7e-05 [Tue May 7 18:38:17 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 7 18:38:17 2013] Using photon index=1.80, rate=0.000314, arf fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1.arf [Tue May 7 18:38:17 2013] Assuming count rate is from the 0.20-8.00 bandpass [Tue May 7 18:38:17 2013] Updating source flux to 6.5e-15 [Tue May 7 18:38:34 2013] Flag b found in src. 1 procflags, skipping spectral fitting [Tue May 7 18:38:34 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting [Tue May 7 18:38:39 2013] acisf12713/analysis//spectral/fullrun_ccd2_acisf12713_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete