[Mon Feb 20 09:57:41 2012] Detection parameters:
  Position = (797.7, 1039.7) = 8 34 14.75 -45 47 31.8
  Extent = 0.7" x 0.5", rotation angle = 95 degrees
  Source counts = 13.5 +/- 4.0
  Background counts = 2.5
  Rate = 0.0006 +/- 0.0002

[Mon Feb 20 09:57:42 2012] Off-axis axis estimate = 3.43'
[Mon Feb 20 10:24:55 2012] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:24:55 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Feb 20 10:24:55 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.138
[Mon Feb 20 10:24:55 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 0.68"
[Mon Feb 20 10:38:44 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass0_src9.ximg exists
[Mon Feb 20 10:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12697_pi14-548_cl_pass0_src9.csv
[Mon Feb 20 10:38:44 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Feb 20 10:38:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12697_pi14-548_cl_pass0_src9.csv
[Mon Feb 20 10:38:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12697_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12697_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 10:38:44 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Feb 20 10:38:44 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Feb 20 10:38:44 2012] Fit fullrun_ccd3_acisf12697_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Feb 20 10:38:50 2012] Spatial fit model total counts = 21.848100, observed total counts = 22.000000
[Mon Feb 20 10:38:50 2012] Offset between fit and detection position for source 8 = 0.885200 pixels
[Mon Feb 20 10:38:50 2012] 22.467520 total counts/ 7.870220 bgd. counts: snr = 5.203303
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.885200 pixels
  Position = (798.0, 1040.5) = 8 34 14.76 -45 47 31.6
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 14.6 +/- 4.7
  Background counts = 7.9
  Rate = 0.0006 +/- 0.0002
[Mon Feb 20 10:38:50 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:38:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:38:50 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 10:38:50 2012] Source does appear to be extended
[Mon Feb 20 10:38:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:56:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:56:07 2012] Initial guess for spatial extent in simple fitting = 0.68"
[Mon Feb 20 10:56:07 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.848
[Mon Feb 20 10:56:07 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 0.68"
[Mon Feb 20 11:09:22 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass1_src9.ximg exists
[Mon Feb 20 11:09:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12697_pi14-548_cl_pass1_src9.csv
[Mon Feb 20 11:09:22 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Feb 20 11:09:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12697_pi14-548_cl_pass1_src9.csv
[Mon Feb 20 11:09:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12697_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12697_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 11:09:23 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Feb 20 11:09:23 2012] fullrun_ccd3_acisf12697_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Feb 20 11:09:23 2012] Fit fullrun_ccd3_acisf12697_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Feb 20 11:09:29 2012] Spatial fit model total counts = 22.974600, observed total counts = 23.000000
[Mon Feb 20 11:09:29 2012] Offset between fit and detection position for source 8 = 0.062620 pixels
[Mon Feb 20 11:09:29 2012] 23.435600 total counts/ 8.784400 bgd. counts: snr = 4.943302
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.062620 pixels
  Position = (798.0, 1040.6) = 8 34 14.76 -45 47 31.6
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 14.7 +/- 4.8
  Background counts = 8.8
  Rate = 0.0006 +/- 0.0002
[Mon Feb 20 11:09:29 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 11:09:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 11:09:29 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 11:09:29 2012] Source does appear to be extended
[Mon Feb 20 11:09:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 11:18:49 2012] Writing source region out to fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8_src.reg
[Mon Feb 20 11:18:49 2012] Extracting stamp from image fullrun_ccd3_acisf12697_pi14-548_cl_sm2.00.img.gz, (766, 1009) - (830, 1072)
[Mon Feb 20 11:18:49 2012] Writing fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8.gif
[Mon Feb 20 11:23:59 2012] Size of ../../acisf12697/products/events/fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8_src.evt.gz[events] = 17 counts
[Mon Feb 20 11:23:59 2012] Mean chipx,y = (553.59, 891.00)
[Mon Feb 20 11:23:59 2012] Mean tdetx,y = (4241.00, 3614.59)
[Mon Feb 20 11:23:59 2012] chipx,y range = (536.00-571.00, 878.00-912.00)
[Mon Feb 20 11:23:59 2012] Size of ../../acisf12697/products/events/fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 43 counts
[Mon Feb 20 11:24:00 2012] Not generating rmf since there are only 14 counts
[Mon Feb 20 11:24:00 2012] arf not found, will run specextract
[Mon Feb 20 11:24:27 2012] ../../acisf12697/products/spectra/fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8.warf not found
[Mon Feb 20 11:24:27 2012] ../../acisf12697/products/spectra/fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8.wrmf not found
[Mon Feb 20 11:24:27 2012] Removal of ../../acisf12697/products/spectra/fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8.soff failed
[Mon Feb 20 11:28:42 2012] Spectrum 8 has only 15 counts, deleting rmf
[Mon Feb 20 11:28:42 2012] 188.135
[Mon Feb 20 11:28:45 2012] Updating aperture counts using extracted products
[Mon Feb 20 11:28:45 2012] Error reading totcts from fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8_src.pi.gz
[Mon Feb 20 11:28:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 11:28:45 2012] Using photon index=1.80, rate=0.000635, arf fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8.arf
[Mon Feb 20 11:28:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 11:28:45 2012] Updating source flux to 9.1e-15
[Mon Feb 20 11:28:53 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Feb 20 11:28:54 2012] acisf12697/analysis//spectral/fullrun_ccd3_acisf12697_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete