[Mon Feb 20 09:57:39 2012] Detection parameters:
  Position = (762.1, 1006.0) = 8 33 56.46 -45 40 5.6
  Extent = 2.5" x 1.8", rotation angle = 107 degrees
  Source counts = 282.1 +/- 17.9
  Background counts = 38.9
  Rate = 0.01 +/- 0.0008

[Mon Feb 20 09:57:40 2012] Off-axis axis estimate = 7.64'
[Mon Feb 20 10:19:04 2012] Using EEF radius (= 2.59 ")to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:19:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 10:19:04 2012] Initial guess for spatial extent in simple fitting = 2.59"
[Mon Feb 20 10:19:04 2012] source mask rpix=5.3, npix_max = 132, mask sum = 144, frac = 1.086
[Mon Feb 20 10:19:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 2.59"
[Mon Feb 20 10:24:55 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass0_src1.ximg exists
[Mon Feb 20 10:24:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12697_pi14-548_cl_pass0_src1.csv
[Mon Feb 20 10:24:55 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Feb 20 10:24:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12697_pi14-548_cl_pass0_src1.csv
[Mon Feb 20 10:24:55 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12697_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12697_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 10:24:55 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Feb 20 10:24:55 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Feb 20 10:24:55 2012] Fit fullrun_ccd2_acisf12697_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Feb 20 10:38:49 2012] Spatial fit model total counts = 355.998000, observed total counts = 356.000000
[Mon Feb 20 10:38:49 2012] Offset between fit and detection position for source 1 = 0.879382 pixels
[Mon Feb 20 10:38:49 2012] 356.131800 total counts/ 88.477800 bgd. counts: snr = 28.454868
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.879382 pixels
  Position = (763.0, 1006.2) = 8 33 56.44 -45 40 5.8
  Extent = 2.2 (2.0-2.5)", rotation angle = 0
  Source counts = 267.7 +/- 18.9
  Background counts = 88.5
  Rate = 0.01 +/- 0.0008
[Mon Feb 20 10:38:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 10:38:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 10:38:49 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 10:38:49 2012] Source does appear to be extended
[Mon Feb 20 10:38:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 10:52:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb 20 10:52:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 20 10:52:04 2012] Initial guess for spatial extent in simple fitting = 2.21"
[Mon Feb 20 10:52:04 2012] source mask rpix=4.5, npix_max = 99, mask sum = 100, frac = 1.001
[Mon Feb 20 10:52:04 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.21"
[Mon Feb 20 10:56:07 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass1_src1.ximg exists
[Mon Feb 20 10:56:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12697_pi14-548_cl_pass1_src1.csv
[Mon Feb 20 10:56:07 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Feb 20 10:56:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12697_pi14-548_cl_pass1_src1.csv
[Mon Feb 20 10:56:07 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12697_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12697_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 20 10:56:07 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Feb 20 10:56:07 2012] fullrun_ccd2_acisf12697_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Feb 20 10:56:07 2012] Fit fullrun_ccd2_acisf12697_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Feb 20 11:09:27 2012] Spatial fit model total counts = 337.000000, observed total counts = 337.000000
[Mon Feb 20 11:09:27 2012] Offset between fit and detection position for source 1 = 0.116988 pixels
[Mon Feb 20 11:09:27 2012] 336.879000 total counts/ 81.095000 bgd. counts: snr = 28.403793
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.116988 pixels
  Position = (763.0, 1006.1) = 8 33 56.44 -45 40 5.8
  Extent = 2.1 (1.9-2.4)", rotation angle = 0
  Source counts = 255.8 +/- 18.4
  Background counts = 81.1
  Rate = 0.01 +/- 0.0008
[Mon Feb 20 11:09:27 2012] Vigneting correction estimate = 1.000000
[Mon Feb 20 11:09:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 20 11:09:27 2012] Assessing source extent using major axis lower bound
[Mon Feb 20 11:09:27 2012] Source does appear to be extended
[Mon Feb 20 11:09:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 20 11:16:26 2012] Writing source region out to fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1_src.reg
[Mon Feb 20 11:16:26 2012] Extracting stamp from image fullrun_ccd2_acisf12697_pi14-548_cl_sm2.00.img.gz, (666, 909) - (860, 1103)
[Mon Feb 20 11:16:26 2012] Writing fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1.gif
[Mon Feb 20 11:16:27 2012] Size of ../../acisf12697/products/events/fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1_src.evt.gz[events] = 319 counts
[Mon Feb 20 11:16:27 2012] Mean chipx,y = (455.65, 187.45)
[Mon Feb 20 11:16:27 2012] Mean tdetx,y = (3248.45, 3630.35)
[Mon Feb 20 11:16:27 2012] chipx,y range = (423.00-481.00, 160.00-213.00)
[Mon Feb 20 11:16:27 2012] Size of ../../acisf12697/products/events/fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 274 counts
[Mon Feb 20 11:16:28 2012] rmf not found, will run specextract
[Mon Feb 20 11:16:28 2012] arf not found, will run specextract
[Mon Feb 20 11:16:51 2012] ../../acisf12697/products/spectra/fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1.warf not found
[Mon Feb 20 11:16:51 2012] ../../acisf12697/products/spectra/fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1.wrmf not found
[Mon Feb 20 11:16:51 2012] Removal of ../../acisf12697/products/spectra/fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1.soff failed
[Mon Feb 20 11:18:49 2012] Keeping rmf generated by specextract
[Mon Feb 20 11:18:49 2012] 162.368
[Mon Feb 20 11:28:45 2012] Updating aperture counts using extracted products
[Mon Feb 20 11:28:45 2012] Error reading totcts from fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1_src.pi.gz
[Mon Feb 20 11:28:45 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 11:28:45 2012] Using photon index=1.80, rate=0.0111, arf fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1.arf
[Mon Feb 20 11:28:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 11:28:45 2012] Updating source flux to 1.8e-13
[Mon Feb 20 11:28:53 2012] Reading fit data from acisf12697/analysis//spectral/fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1_pl.csv
[Mon Feb 20 11:28:53 2012] Spectral fit parameter nH value = 5.61285e+21
[Mon Feb 20 11:28:53 2012] Spectral fit parameter PhoIndex value = 6.55202
[Mon Feb 20 11:28:53 2012] Failed to get F(0.3-8.0) from acisf12697/analysis//spectral/fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Feb 20 11:28:53 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 20 11:28:53 2012] Using Nh = 5.6e+21, photon index=6.55, rate=0.0111, arf fullrun_ccd2_acisf12697_pi14-548_pass1_cl_src1.arf
[Mon Feb 20 11:28:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 20 11:28:53 2012] Updating source flux to 1.2e-13