[Fri May 10 10:52:21 2013] Detection parameters:
  Position = (838.2, 353.1) = 17 48 41.74 -27 6 9.0
  Extent = 0.6" x 0.5", rotation angle = 134 degrees
  Source counts = 11.8 +/- 3.7
  Background counts = 2.2
  Rate = 9e-05 +/- 3e-05

[Fri May 10 10:52:22 2013] Off-axis axis estimate = 3.77'
[Fri May 10 12:38:42 2013] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Fri May 10 12:38:42 2013] Initial guess for spatial extent in simple fitting = 0.76"
[Fri May 10 12:38:42 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.948
[Fri May 10 12:38:42 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 0.76"
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src22.ximg exists
[Fri May 10 13:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src22.csv
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src22_1.ximg exists
[Fri May 10 13:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src22.csv
[Fri May 10 13:09:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Fri May 10 13:09:47 2013] Fit fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src22 appears to have run properly
[Fri May 10 14:44:46 2013] Spatial fit model total counts = 31.411100, observed total counts = 36.000000
[Fri May 10 14:44:46 2013] Offset between fit and detection position for source 8 = 2.137324 pixels
[Fri May 10 14:44:46 2013] 33.932170 total counts/ 8.801270 bgd. counts: snr = 8.471013
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 2.137324 pixels
  Position = (840.0, 351.8) = 17 48 41.69 -27 6 9.9
  Extent = 1.5 (1.1-3.1)" x 0.7 (0.5-1.2)", rotation angle = 234 (215-264) degrees
  Source counts = 25.1 +/- 5.8
  Background counts = 8.8
  Rate = 0.0002 +/- 5e-05
[Fri May 10 14:44:46 2013] Vigneting correction estimate = 1.000000
[Fri May 10 14:44:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 14:44:46 2013] Assessing source extent using major axis lower bound
[Fri May 10 14:44:46 2013] Source does appear to be extended
[Fri May 10 14:44:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Fri May 10 16:10:43 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 16:10:43 2013] Initial guess for spatial extent in simple fitting = 1.11"
[Fri May 10 16:10:43 2013] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.182
[Fri May 10 16:10:43 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 1.11"
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src22.ximg exists
[Fri May 10 16:44:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src22.csv
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src22_1.ximg exists
[Fri May 10 16:44:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src22.csv
[Fri May 10 16:44:00 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Fri May 10 16:44:00 2013] Fit fullrun_ccd6_acisf12693_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Fri May 10 18:20:32 2013] Spatial fit model total counts = 32.101400, observed total counts = 37.000000
[Fri May 10 18:20:32 2013] Offset between fit and detection position for source 8 = 0.510794 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.510794 pixels
  Position = (840.5, 351.8) = 17 48 41.68 -27 6 9.9
  Extent = 1.9 (1.5-2.2)" x 0.9 (0.6-1.2)", rotation angle = 60 (46-75) degrees
  Source counts = 34.7 +/- 5.9
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Fri May 10 18:20:32 2013] Vigneting correction estimate = 1.000000
[Fri May 10 18:20:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 18:20:32 2013] Assessing source extent using major axis lower bound
[Fri May 10 18:20:32 2013] Source does appear to be extended
[Fri May 10 18:20:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Fri May 10 18:29:00 2013] Writing source region out to fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8_src.reg
[Fri May 10 18:29:00 2013] Extracting stamp from image fullrun_ccd6_acisf12693_pi14-548_cl_sm2.00.img.gz, (752, 264) - (929, 440)
[Fri May 10 18:29:00 2013] Writing fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8.gif
[Fri May 10 18:41:01 2013] Size of ../../acisf12693/products/events/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8_src.evt.gz[events] = 47 counts
[Fri May 10 18:41:01 2013] Mean chipx,y = (813.60, 332.96)
[Fri May 10 18:41:01 2013] Mean tdetx,y = (3688.60, 2034.96)
[Fri May 10 18:41:01 2013] chipx,y range = (790.00-840.00, 314.00-351.00)
[Fri May 10 18:41:01 2013] Size of ../../acisf12693/products/events/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 460 counts
[Fri May 10 18:41:02 2013] Not generating rmf since there are only 34 counts
[Fri May 10 18:41:02 2013] arf not found, will run specextract
[Fri May 10 18:41:33 2013] ../../acisf12693/products/spectra/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8.warf not found
[Fri May 10 18:41:33 2013] ../../acisf12693/products/spectra/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8.wrmf not found
[Fri May 10 18:41:33 2013] Removal of ../../acisf12693/products/spectra/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8.soff failed
[Fri May 10 18:47:22 2013] Spectrum 8 has only 35 counts, deleting rmf
[Fri May 10 18:47:22 2013] 199.973
[Fri May 10 19:14:17 2013] Updating aperture counts using extracted products
[Fri May 10 19:14:17 2013] Total counts from fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8_src.pi.gz = 47.00
[Fri May 10 19:14:17 2013] Total counts from fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8_bgd.pi.gz = 460.00
[Fri May 10 19:14:17 2013] Got source and background scale factors 0.000005, 0.000136
[Fri May 10 19:14:17 2013] User source parameters:
  Position = (840.5, 351.8) = 17 48 41.68 -27 6 9.9
  Extent = 1.9 (1.5-2.2)" x 0.9 (0.6-1.2)", rotation angle = 60 (46-75) degrees
  Source aperture counts = 28.7 +/- 7.9
  Background aperture counts = 18.3
  Rate = 0.0002 +/- 6e-05

[Fri May 10 19:14:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 19:14:19 2013] Using photon index=1.80, rate=0.000272, arf fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src8.arf
[Fri May 10 19:14:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 19:14:19 2013] Updating source flux to 4e-15
[Fri May 10 19:14:58 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting