[Fri May 10 10:52:22 2013] Detection parameters:
  Position = (1033.1, 630.4) = 17 48 34.56 -27 3 52.6
  Extent = 0.7" x 0.6", rotation angle = 127 degrees
  Source counts = 11.0 +/- 4.2
  Background counts = 7.0
  Rate = 9e-05 +/- 3e-05

[Fri May 10 10:52:22 2013] Off-axis axis estimate = 6.41'
[Fri May 10 12:38:42 2013] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Fri May 10 12:38:42 2013] Initial guess for spatial extent in simple fitting = 1.84"
[Fri May 10 12:38:42 2013] source mask rpix=3.7, npix_max = 72, mask sum = 64, frac = 0.887
[Fri May 10 12:38:42 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 1.84"
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src24.ximg exists
[Fri May 10 13:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src24.csv
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src24_1.ximg exists
[Fri May 10 13:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src24.csv
[Fri May 10 13:09:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12693_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Fri May 10 13:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src24.csv
[Fri May 10 13:09:47 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 10 13:09:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src24.csv
[Fri May 10 13:09:47 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12693_pi14-548_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 14:44:46 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 22.418666 pixels away
[Fri May 10 14:44:46 2013] Vigneting correction estimate = 1.000000
[Fri May 10 14:44:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 14:44:46 2013] Assessing source extent using major
[Fri May 10 14:44:46 2013] Source does appear to be extended
[Fri May 10 14:44:46 2013] Computing asymmetry using major and minor axis, asym = 1.13
[Fri May 10 14:44:46 2013] Source is confused with source 34
[Fri May 10 16:10:43 2013] Using EEF radius (= 1.84 ")to estimate initial spatial extent for simple fitting
[Fri May 10 16:10:43 2013] Initial guess for spatial extent in simple fitting = 1.84"
[Fri May 10 16:10:43 2013] source mask rpix=3.7, npix_max = 72, mask sum = 64, frac = 0.887
[Fri May 10 16:10:43 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 1.84"
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src24.ximg exists
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src24_1.ximg exists
[Fri May 10 16:44:00 2013] Fit fullrun_ccd6_acisf12693_pi14-548_cl_pass1_src24 appears to have run properly
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Fri May 10 16:44:00 2013] fullrun_ccd6_acisf12693_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Fri May 10 16:44:00 2013] Fit fullrun_ccd6_acisf12693_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Fri May 10 18:20:32 2013] Spatial fit model total counts = 34.819400, observed total counts = 34.000000
[Fri May 10 18:20:32 2013] Offset between fit and detection position for source 21 = 3.511363 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 3.511363 pixels
  Position = (1035.6, 627.9) = 17 48 34.49 -27 3 54.0
  Extent = 2.1 (1.4-2.6)", rotation angle = 0
  Source counts = 34.7 +/- 5.9
  Background counts = 0.0
  Rate = 0.0003 +/- 5e-05
[Fri May 10 18:20:32 2013] Vigneting correction estimate = 1.000000
[Fri May 10 18:20:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 18:20:32 2013] Assessing source extent using major axis lower bound
[Fri May 10 18:20:32 2013] Source does appear to be extended
[Fri May 10 18:20:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 18:29:00 2013] Writing source region out to fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21_src.reg
[Fri May 10 18:29:00 2013] Extracting stamp from image fullrun_ccd6_acisf12693_pi14-548_cl_sm2.00.img.gz, (939, 531) - (1133, 725)
[Fri May 10 18:29:00 2013] Writing fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21.gif
[Fri May 10 18:42:18 2013] Size of ../../acisf12693/products/events/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21_src.evt.gz[events] = 49 counts
[Fri May 10 18:42:18 2013] Mean chipx,y = (577.43, 85.86)
[Fri May 10 18:42:18 2013] Mean tdetx,y = (3452.43, 1787.86)
[Fri May 10 18:42:18 2013] chipx,y range = (551.00-606.00, 64.00-116.00)
[Fri May 10 18:42:18 2013] Size of ../../acisf12693/products/events/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 514 counts
[Fri May 10 18:42:19 2013] Not generating rmf since there are only 34 counts
[Fri May 10 18:42:19 2013] arf not found, will run specextract
[Fri May 10 18:42:34 2013] ../../acisf12693/products/spectra/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21.warf not found
[Fri May 10 18:42:34 2013] ../../acisf12693/products/spectra/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21.wrmf not found
[Fri May 10 18:42:34 2013] Removal of ../../acisf12693/products/spectra/fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21.soff failed
[Fri May 10 18:47:22 2013] Spectrum 21 has only 35 counts, deleting rmf
[Fri May 10 18:47:22 2013] 167.562
[Fri May 10 19:14:17 2013] Updating aperture counts using extracted products
[Fri May 10 19:14:17 2013] Total counts from fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21_src.pi.gz = 49.00
[Fri May 10 19:14:17 2013] Total counts from fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21_bgd.pi.gz = 514.00
[Fri May 10 19:14:17 2013] Got source and background scale factors 0.000014, 0.000162
[Fri May 10 19:14:17 2013] User source parameters:
  Position = (1035.6, 627.9) = 17 48 34.49 -27 3 54.0
  Extent = 2.1 (1.4-2.6)", rotation angle = 0
  Source aperture counts = 4.9 +/- 8.1
  Background aperture counts = 44.1
  Rate = 4e-05 +/- 6e-05

[Fri May 10 19:14:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 19:14:19 2013] Using photon index=1.80, rate=0.000272, arf fullrun_ccd6_acisf12693_pi14-548_pass1_cl_src21.arf
[Fri May 10 19:14:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 19:14:19 2013] Updating source flux to 4.7e-15
[Fri May 10 19:14:58 2013] Flag c found in src. 21 procflags, skipping spectral fitting
[Fri May 10 19:14:58 2013] Source 21 has fewer than 100.000000 counts, skipping spectral fitting