[Fri Jan 13 23:41:00 2012] Detection parameters:
  Position = (283.8, 634.9) = 20 19 54.05 40 51 53.3
  Extent = 0.9" x 0.7", rotation angle = 21 degrees
  Source counts = 26.1 +/- 5.4
  Background counts = 2.9
  Rate = 0.0006 +/- 0.0001

[Fri Jan 13 23:41:01 2012] Off-axis axis estimate = 4.47'
[Sat Jan 14 01:31:57 2012] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Sat Jan 14 01:31:57 2012] Initial guess for spatial extent in simple fitting = 0.98"
[Sat Jan 14 01:31:57 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.000
[Sat Jan 14 01:31:57 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 0.98"
[Sat Jan 14 02:35:37 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src24.ximg exists
[Sat Jan 14 02:35:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src24.csv
[Sat Jan 14 02:35:37 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src24_1.ximg exists
[Sat Jan 14 02:35:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src24.csv
[Sat Jan 14 02:35:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 02:35:38 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Sat Jan 14 02:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src24.csv
[Sat Jan 14 02:35:38 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jan 14 02:35:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src24.csv
[Sat Jan 14 02:35:38 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 04:17:16 2012] Spatial fit model total counts = 27.408900, observed total counts = 32.000000
[Sat Jan 14 04:17:16 2012] Offset between fit and detection position for source 28 = 0.611011 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.611011 pixels
  Position = (283.7, 635.5) = 20 19 54.07 40 51 53.3
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 27.8 +/- 5.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Jan 14 04:17:16 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 04:17:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 04:17:16 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 04:17:16 2012] Source does appear to be extended
[Sat Jan 14 04:17:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 05:58:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 14 05:58:25 2012] Initial guess for spatial extent in simple fitting = 1.04"
[Sat Jan 14 05:58:25 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.912
[Sat Jan 14 05:58:25 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 1.04"
[Sat Jan 14 07:02:40 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass1_src24.ximg exists
[Sat Jan 14 07:02:40 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass1_src24_1.ximg exists
[Sat Jan 14 07:02:40 2012] Fit fullrun_ccd3_acisf12676_pi14-548_cl_pass1_src24 appears to have run properly
[Sat Jan 14 07:02:41 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass1_tfrozen_src24.ximg exists
[Sat Jan 14 07:02:41 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Jan 14 07:02:41 2012] Fit fullrun_ccd3_acisf12676_pi14-548_cl_pass1_tfrozen_src24 appears to have run properly
[Sat Jan 14 08:38:52 2012] Spatial fit model total counts = 28.147900, observed total counts = 31.000000
[Sat Jan 14 08:38:52 2012] Offset between fit and detection position for source 28 = 0.147677 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.147677 pixels
  Position = (283.9, 635.4) = 20 19 54.07 40 51 53.3
  Extent = 1.1 (0.8-1.3)", rotation angle = 0
  Source counts = 28.3 +/- 5.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Sat Jan 14 08:38:52 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 08:38:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 08:38:52 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 08:38:52 2012] Source does appear to be extended
[Sat Jan 14 08:38:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 09:26:53 2012] Writing source region out to fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28_src.reg
[Sat Jan 14 09:26:53 2012] Extracting stamp from image fullrun_ccd3_acisf12676_pi14-548_cl_sm2.00.img.gz, (236, 587) - (332, 683)
[Sat Jan 14 09:26:53 2012] Writing fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28.gif
[Sat Jan 14 09:39:18 2012] Size of ../../acisf12676/products/events/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28_src.evt.gz[events] = 33 counts
[Sat Jan 14 09:39:18 2012] Mean chipx,y = (425.73, 854.27)
[Sat Jan 14 09:39:18 2012] Mean tdetx,y = (4277.73, 3486.73)
[Sat Jan 14 09:39:18 2012] chipx,y range = (407.00-447.00, 836.00-878.00)
[Sat Jan 14 09:39:18 2012] Size of ../../acisf12676/products/events/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 69 counts
[Sat Jan 14 09:39:20 2012] Not generating rmf since there are only 28 counts
[Sat Jan 14 09:39:20 2012] arf not found, will run specextract
[Sat Jan 14 09:39:47 2012] ../../acisf12676/products/spectra/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28.warf not found
[Sat Jan 14 09:39:47 2012] ../../acisf12676/products/spectra/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28.wrmf not found
[Sat Jan 14 09:39:47 2012] Removal of ../../acisf12676/products/spectra/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28.soff failed
[Sat Jan 14 09:58:15 2012] Spectrum 28 has only 28 counts, deleting rmf
[Sat Jan 14 09:58:15 2012] 182.982
[Sat Jan 14 10:00:50 2012] Updating aperture counts using extracted products
[Sat Jan 14 10:00:50 2012] Error reading totcts from fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28_src.pi.gz
[Sat Jan 14 10:00:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 14 10:00:51 2012] Using photon index=1.80, rate=0.000605, arf fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src28.arf
[Sat Jan 14 10:00:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jan 14 10:00:51 2012] Updating source flux to 9.8e-15
[Sat Jan 14 10:01:18 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting