[Fri Jan 13 23:41:00 2012] Detection parameters:
  Position = (327.3, 182.2) = 20 19 52.17 40 48 10.5
  Extent = 0.9" x 0.6", rotation angle = 19 degrees
  Source counts = 13.4 +/- 4.0
  Background counts = 2.6
  Rate = 0.0003 +/- 9e-05

[Fri Jan 13 23:41:01 2012] Off-axis axis estimate = 0.97'
[Sat Jan 14 01:31:57 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Jan 14 01:31:57 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Jan 14 01:31:57 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.926
[Sat Jan 14 01:31:57 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 0.38"
[Sat Jan 14 02:35:37 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src42.ximg exists
[Sat Jan 14 02:35:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src42.csv
[Sat Jan 14 02:35:37 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src42_1.ximg exists
[Sat Jan 14 02:35:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src42.csv
[Sat Jan 14 02:35:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12676_pi14-548_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 02:35:38 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src42.ximg exists
[Sat Jan 14 02:35:38 2012] fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src42_1.ximg exists
[Sat Jan 14 02:35:38 2012] Fit fullrun_ccd3_acisf12676_pi14-548_cl_pass0_tfrozen_src42 appears to have run properly
[Sat Jan 14 04:17:16 2012] Spatial fit model total counts = 22.613100, observed total counts = 22.000000
[Sat Jan 14 04:17:16 2012] Offset between fit and detection position for source 24 = 1.243645 pixels
[Sat Jan 14 04:17:16 2012] 22.898070 total counts/ 12.955700 bgd. counts: snr = 2.762228
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 1.243645 pixels
  Position = (327.8, 183.3) = 20 19 52.17 40 48 10.9
  Extent = 0.5 (0.2-1.0)", rotation angle = 0
  Source counts = 9.9 +/- 4.8
  Background counts = 13.0
  Rate = 0.0002 +/- 0.0001
[Sat Jan 14 04:17:16 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 04:17:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 04:17:16 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 04:17:16 2012] Source does appear to be extended
[Sat Jan 14 04:17:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 05:58:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 14 05:58:25 2012] Initial guess for spatial extent in simple fitting = 0.51"
[Sat Jan 14 05:58:25 2012] Spatial fitting skipped for pass 1: source                                 has 9.9 net counts, is at off-axis angle 1.0'
[Sat Jan 14 08:38:52 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 08:38:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 08:38:52 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 08:38:52 2012] Source does appear to be extended
[Sat Jan 14 08:38:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 09:26:53 2012] Writing source region out to fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24_src.reg
[Sat Jan 14 09:26:53 2012] Extracting stamp from image fullrun_ccd3_acisf12676_pi14-548_cl_sm2.00.img.gz, (304, 160) - (351, 207)
[Sat Jan 14 09:26:53 2012] Writing fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24.gif
[Sat Jan 14 09:49:39 2012] Size of ../../acisf12676/products/events/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24_src.evt.gz[events] = 14 counts
[Sat Jan 14 09:49:39 2012] Mean chipx,y = (878.43, 935.43)
[Sat Jan 14 09:49:39 2012] Mean tdetx,y = (4196.57, 3939.43)
[Sat Jan 14 09:49:39 2012] chipx,y range = (859.00-890.00, 923.00-955.00)
[Sat Jan 14 09:49:39 2012] Size of ../../acisf12676/products/events/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24_bgd.evt.gz[events] = 21 counts
[Sat Jan 14 09:49:40 2012] Not generating rmf since there are only 9 counts
[Sat Jan 14 09:49:40 2012] arf not found, will run specextract
[Sat Jan 14 09:50:09 2012] ../../acisf12676/products/spectra/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24.warf not found
[Sat Jan 14 09:50:09 2012] ../../acisf12676/products/spectra/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24.wrmf not found
[Sat Jan 14 09:50:09 2012] Removal of ../../acisf12676/products/spectra/fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24.soff failed
[Sat Jan 14 09:58:15 2012] Spectrum 24 has only 10 counts, deleting rmf
[Sat Jan 14 09:58:15 2012] 200.454
[Sat Jan 14 10:00:51 2012] Updating aperture counts using extracted products
[Sat Jan 14 10:00:51 2012] Error reading totcts from fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24_src.pi.gz
[Sat Jan 14 10:00:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 14 10:00:51 2012] Using photon index=1.80, rate=0.000213, arf fullrun_ccd3_acisf12676_pi14-548_pass1_cl_src24.arf
[Sat Jan 14 10:00:51 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jan 14 10:00:51 2012] Updating source flux to 3.2e-15
[Sat Jan 14 10:01:18 2012] Source 24 has fewer than 100.000000 counts, skipping spectral fitting