[Fri Jan 13 23:40:30 2012] Detection parameters:
  Position = (908.4, 240.6) = 20 20 9.88 40 46 27.4
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 15.4 +/- 4.1
  Background counts = 1.6
  Rate = 0.0003 +/- 9e-05

[Fri Jan 13 23:40:30 2012] Off-axis axis estimate = 2.92'
[Sat Jan 14 01:12:37 2012] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Sat Jan 14 01:12:37 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Sat Jan 14 01:12:37 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.831
[Sat Jan 14 01:12:37 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 0.56"
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src14.ximg exists
[Sat Jan 14 01:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src14.csv
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src14_1.ximg exists
[Sat Jan 14 01:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src14.csv
[Sat Jan 14 01:31:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Sat Jan 14 01:31:57 2012] Fit fullrun_ccd2_acisf12676_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Sat Jan 14 04:17:09 2012] Spatial fit model total counts = 19.808400, observed total counts = 20.000000
[Sat Jan 14 04:17:09 2012] Offset between fit and detection position for source 28 = 0.699344 pixels
[Sat Jan 14 04:17:09 2012] 19.919870 total counts/ 3.752070 bgd. counts: snr = 8.346713
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.699344 pixels
  Position = (908.8, 241.1) = 20 20 9.88 40 46 27.4
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 16.2 +/- 4.5
  Background counts = 3.8
  Rate = 0.0003 +/- 0.0001
[Sat Jan 14 04:17:09 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 04:17:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 04:17:09 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 04:17:09 2012] Source does appear to be extended
[Sat Jan 14 04:17:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 05:37:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 14 05:37:45 2012] Initial guess for spatial extent in simple fitting = 0.61"
[Sat Jan 14 05:37:45 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.316
[Sat Jan 14 05:37:45 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 0.61"
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src14.ximg exists
[Sat Jan 14 05:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src14.csv
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src14_1.ximg exists
[Sat Jan 14 05:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src14.csv
[Sat Jan 14 05:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Jan 14 05:58:24 2012] Fit fullrun_ccd2_acisf12676_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Sat Jan 14 08:38:46 2012] Spatial fit model total counts = 19.917600, observed total counts = 20.000000
[Sat Jan 14 08:38:46 2012] Offset between fit and detection position for source 28 = 0.016078 pixels
[Sat Jan 14 08:38:46 2012] 19.956170 total counts/ 3.676270 bgd. counts: snr = 8.490789
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.016078 pixels
  Position = (908.9, 241.1) = 20 20 9.88 40 46 27.4
  Extent = 0.6 (0.4-0.8)", rotation angle = 0
  Source counts = 16.3 +/- 4.5
  Background counts = 3.7
  Rate = 0.0003 +/- 0.0001
[Sat Jan 14 08:38:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 08:38:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 08:38:46 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 08:38:46 2012] Source does appear to be extended
[Sat Jan 14 08:38:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 09:08:27 2012] Writing source region out to fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28_src.reg
[Sat Jan 14 09:08:27 2012] Extracting stamp from image fullrun_ccd2_acisf12676_pi14-548_cl_sm2.00.img.gz, (881, 213) - (937, 269)
[Sat Jan 14 09:08:27 2012] Writing fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28.gif
[Sat Jan 14 09:16:57 2012] Size of ../../acisf12676/products/events/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28_src.evt.gz[events] = 17 counts
[Sat Jan 14 09:16:57 2012] Mean chipx,y = (53.71, 681.94)
[Sat Jan 14 09:16:57 2012] Mean tdetx,y = (3742.94, 4032.29)
[Sat Jan 14 09:16:57 2012] chipx,y range = (39.00-70.00, 668.00-697.00)
[Sat Jan 14 09:16:57 2012] Size of ../../acisf12676/products/events/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 21 counts
[Sat Jan 14 09:16:58 2012] Not generating rmf since there are only 16 counts
[Sat Jan 14 09:16:58 2012] arf not found, will run specextract
[Sat Jan 14 09:17:31 2012] ../../acisf12676/products/spectra/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28.warf not found
[Sat Jan 14 09:17:31 2012] ../../acisf12676/products/spectra/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28.wrmf not found
[Sat Jan 14 09:17:31 2012] Removal of ../../acisf12676/products/spectra/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28.soff failed
[Sat Jan 14 09:26:52 2012] Spectrum 28 has only 16 counts, deleting rmf
[Sat Jan 14 09:26:52 2012] 194.769
[Sat Jan 14 10:00:50 2012] Updating aperture counts using extracted products
[Sat Jan 14 10:00:50 2012] Error reading totcts from fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28_src.pi.gz
[Sat Jan 14 10:00:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 14 10:00:50 2012] Using photon index=1.80, rate=0.000348, arf fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28.arf
[Sat Jan 14 10:00:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jan 14 10:00:50 2012] Updating source flux to 5.4e-15
[Sat Jan 14 10:01:17 2012] Source 28 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jan 14 10:01:18 2012] acisf12676/analysis//spectral/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete