[Fri Jan 13 23:40:30 2012] Detection parameters:
  Position = (274.8, 107.5) = 20 20 37.31 40 45 21.5
  Extent = 1.8" x 0.9", rotation angle = 16 degrees
  Source counts = 12.9 +/- 4.1
  Background counts = 4.1
  Rate = 0.0003 +/- 9e-05

[Fri Jan 13 23:40:30 2012] Off-axis axis estimate = 8.21'
[Sat Jan 14 01:12:37 2012] Using EEF radius (= 2.98 ")to estimate initial spatial extent for simple fitting
[Sat Jan 14 01:12:37 2012] Initial guess for spatial extent in simple fitting = 2.98"
[Sat Jan 14 01:12:37 2012] source mask rpix=6.1, npix_max = 171, mask sum = 169, frac = 0.984
[Sat Jan 14 01:12:37 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 2.98"
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src15.ximg exists
[Sat Jan 14 01:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src15.csv
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src15_1.ximg exists
[Sat Jan 14 01:31:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src15.csv
[Sat Jan 14 01:31:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12676_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sat Jan 14 01:31:57 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Jan 14 01:31:57 2012] Fit fullrun_ccd2_acisf12676_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Jan 14 04:17:09 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 30.550365 pixels away
[Sat Jan 14 04:17:09 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 04:17:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 04:17:09 2012] Assessing source extent using major
[Sat Jan 14 04:17:09 2012] Source does appear to be extended
[Sat Jan 14 04:17:09 2012] Computing asymmetry using major and minor axis, asym = 1.88
[Sat Jan 14 04:17:09 2012] Source is asymmetric
[Sat Jan 14 05:37:45 2012] Using EEF radius (= 2.98 ")to estimate initial spatial extent for simple fitting
[Sat Jan 14 05:37:45 2012] Initial guess for spatial extent in simple fitting = 2.98"
[Sat Jan 14 05:37:45 2012] source mask rpix=6.1, npix_max = 171, mask sum = 169, frac = 0.984
[Sat Jan 14 05:37:45 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 2.98"
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src15.ximg exists
[Sat Jan 14 05:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src15.csv
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src15_1.ximg exists
[Sat Jan 14 05:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src15.csv
[Sat Jan 14 05:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12676_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sat Jan 14 05:58:24 2012] fullrun_ccd2_acisf12676_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Jan 14 05:58:24 2012] Fit fullrun_ccd2_acisf12676_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Jan 14 08:38:46 2012] Spatial fit model total counts = 31.996900, observed total counts = 32.000000
[Sat Jan 14 08:38:46 2012] Offset between fit and detection position for source 26 = 1.612816 pixels
[Sat Jan 14 08:38:46 2012] 31.840300 total counts/ 16.896800 bgd. counts: snr = 3.635382
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.612816 pixels
  Position = (273.5, 108.5) = 20 20 37.39 40 45 21.7
  Extent = 1.9 (0.8-2.9)", rotation angle = 0
  Source counts = 14.9 +/- 5.6
  Background counts = 16.9
  Rate = 0.0003 +/- 0.0001
[Sat Jan 14 08:38:46 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 08:38:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 08:38:46 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 08:38:46 2012] Source does appear to be extended
[Sat Jan 14 08:38:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 09:08:27 2012] Writing source region out to fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26_src.reg
[Sat Jan 14 09:08:27 2012] Extracting stamp from image fullrun_ccd2_acisf12676_pi14-548_cl_sm2.00.img.gz, (187, 22) - (360, 195)
[Sat Jan 14 09:08:27 2012] Writing fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26.gif
[Sat Jan 14 09:17:39 2012] Size of ../../acisf12676/products/events/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26_src.evt.gz[events] = 24 counts
[Sat Jan 14 09:17:39 2012] Mean chipx,y = (96.67, 31.92)
[Sat Jan 14 09:17:39 2012] Mean tdetx,y = (3092.92, 3989.33)
[Sat Jan 14 09:17:39 2012] chipx,y range = (78.00-116.00, 16.00-55.00)
[Sat Jan 14 09:17:39 2012] Size of ../../acisf12676/products/events/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 103 counts
[Sat Jan 14 09:17:40 2012] Not generating rmf since there are only 14 counts
[Sat Jan 14 09:17:40 2012] arf not found, will run specextract
[Sat Jan 14 09:17:49 2012] ../../acisf12676/products/spectra/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26.warf not found
[Sat Jan 14 09:17:49 2012] ../../acisf12676/products/spectra/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26.wrmf not found
[Sat Jan 14 09:17:49 2012] Removal of ../../acisf12676/products/spectra/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26.soff failed
[Sat Jan 14 09:26:52 2012] Spectrum 26 has only 15 counts, deleting rmf
[Sat Jan 14 09:26:52 2012] 165.827
[Sat Jan 14 10:00:50 2012] Updating aperture counts using extracted products
[Sat Jan 14 10:00:50 2012] Error reading totcts from fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26_src.pi.gz
[Sat Jan 14 10:00:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 14 10:00:50 2012] Using photon index=1.80, rate=0.00032, arf fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26.arf
[Sat Jan 14 10:00:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jan 14 10:00:50 2012] Updating source flux to 5.7e-15
[Sat Jan 14 10:01:17 2012] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jan 14 10:01:18 2012] acisf12676/analysis//spectral/fullrun_ccd2_acisf12676_pi14-548_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete