[Fri Jan 13 23:39:29 2012] Detection parameters:
  Position = (597.8, 409.2) = 20 20 11.35 40 39 37.3
  Extent = 0.5" x 0.5", rotation angle = 70 degrees
  Source counts = 135.4 +/- 14.0
  Background counts = 59.6
  Rate = 0.003 +/- 0.0003

[Fri Jan 13 23:39:29 2012] Off-axis axis estimate = 8.37'
[Fri Jan 13 23:45:50 2012] Using EEF radius (= 3.09 ")to estimate initial spatial extent for simple fitting
[Fri Jan 13 23:45:50 2012] Initial guess for spatial extent in simple fitting = 3.09"
[Fri Jan 13 23:45:50 2012] source mask rpix=6.3, npix_max = 184, mask sum = 152, frac = 0.825
[Fri Jan 13 23:45:50 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 3.09"
[Sat Jan 14 00:20:58 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass0_src20.ximg exists
[Sat Jan 14 00:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12676_pi14-548_cl_pass0_src20.csv
[Sat Jan 14 00:20:58 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass0_src20_1.ximg exists
[Sat Jan 14 00:20:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12676_pi14-548_cl_pass0_src20.csv
[Sat Jan 14 00:20:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12676_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12676_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 00:20:58 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sat Jan 14 00:20:58 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jan 14 00:20:58 2012] Fit fullrun_ccd0_acisf12676_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Jan 14 04:17:03 2012] Spatial fit model total counts = 346.999000, observed total counts = 347.000000
[Sat Jan 14 04:17:03 2012] Offset between fit and detection position for source 28 = 2.595712 pixels
[Sat Jan 14 04:17:03 2012] 347.330000 total counts/ 135.099000 bgd. counts: snr = 18.259242
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.595712 pixels
  Position = (597.6, 406.6) = 20 20 11.38 40 39 35.8
  Extent = 3.3 (2.6-4.1)", rotation angle = 0
  Source counts = 212.2 +/- 18.6
  Background counts = 135.1
  Rate = 0.005 +/- 0.0004
[Sat Jan 14 04:17:03 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 04:17:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 04:17:03 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 04:17:03 2012] Source does appear to be extended
[Sat Jan 14 04:17:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 04:17:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan 14 04:17:43 2012] Initial guess for spatial extent in simple fitting = 3.33"
[Sat Jan 14 04:17:43 2012] source mask rpix=6.8, npix_max = 211, mask sum = 178, frac = 0.843
[Sat Jan 14 04:17:43 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 3.33"
[Sat Jan 14 04:57:15 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass1_src19.ximg exists
[Sat Jan 14 04:57:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12676_pi14-548_cl_pass1_src19.csv
[Sat Jan 14 04:57:15 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass1_src19_1.ximg exists
[Sat Jan 14 04:57:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12676_pi14-548_cl_pass1_src19.csv
[Sat Jan 14 04:57:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12676_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12676_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan 14 04:57:15 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Sat Jan 14 04:57:15 2012] fullrun_ccd0_acisf12676_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jan 14 04:57:15 2012] Fit fullrun_ccd0_acisf12676_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Jan 14 08:38:40 2012] Spatial fit model total counts = 367.217000, observed total counts = 368.000000
[Sat Jan 14 08:38:40 2012] Offset between fit and detection position for source 28 = 0.349038 pixels
[Sat Jan 14 08:38:40 2012] 366.504000 total counts/ 158.005000 bgd. counts: snr = 16.587027
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.349038 pixels
  Position = (597.9, 406.6) = 20 20 11.36 40 39 35.8
  Extent = 3.3 (2.7-4.0)", rotation angle = 0
  Source counts = 208.5 +/- 19.1
  Background counts = 158.0
  Rate = 0.004 +/- 0.0004
[Sat Jan 14 08:38:40 2012] Vigneting correction estimate = 1.000000
[Sat Jan 14 08:38:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan 14 08:38:40 2012] Assessing source extent using major axis lower bound
[Sat Jan 14 08:38:40 2012] Source does appear to be extended
[Sat Jan 14 08:38:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan 14 08:39:19 2012] Writing source region out to fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28_src.reg
[Sat Jan 14 08:39:19 2012] Extracting stamp from image fullrun_ccd0_acisf12676_pi14-548_cl_sm2.00.img.gz, (448, 257) - (748, 556)
[Sat Jan 14 08:39:19 2012] Writing fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28.gif
[Sat Jan 14 08:49:04 2012] Size of ../../acisf12676/products/events/fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28_src.evt.gz[events] = 341 counts
[Sat Jan 14 08:49:04 2012] Mean chipx,y = (305.79, 422.62)
[Sat Jan 14 08:49:04 2012] Mean tdetx,y = (3483.62, 4826.21)
[Sat Jan 14 08:49:04 2012] chipx,y range = (265.00-339.00, 384.00-457.00)
[Sat Jan 14 08:49:04 2012] Size of ../../acisf12676/products/events/fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 468 counts
[Sat Jan 14 08:49:05 2012] rmf not found, will run specextract
[Sat Jan 14 08:49:05 2012] arf not found, will run specextract
[Sat Jan 14 08:49:33 2012] ../../acisf12676/products/spectra/fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28.warf not found
[Sat Jan 14 08:49:33 2012] ../../acisf12676/products/spectra/fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28.wrmf not found
[Sat Jan 14 08:49:33 2012] Removal of ../../acisf12676/products/spectra/fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28.soff failed
[Sat Jan 14 08:49:41 2012] Keeping rmf generated by specextract
[Sat Jan 14 08:49:41 2012] 158.738
[Sat Jan 14 10:00:48 2012] Updating aperture counts using extracted products
[Sat Jan 14 10:00:48 2012] Error reading totcts from fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28_src.pi.gz
[Sat Jan 14 10:00:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 14 10:00:48 2012] Using photon index=1.80, rate=0.00446, arf fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28.arf
[Sat Jan 14 10:00:48 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jan 14 10:00:48 2012] Updating source flux to 8.3e-14
[Sat Jan 14 10:01:02 2012] Reading fit data from acisf12676/analysis//spectral/fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28_pl.csv
[Sat Jan 14 10:01:02 2012] Spectral fit parameter nH value = 2.63539e+22
[Sat Jan 14 10:01:02 2012] Spectral fit parameter PhoIndex value = 1.68259
[Sat Jan 14 10:01:02 2012] Failed to get F(0.3-8.0) from acisf12676/analysis//spectral/fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28_pl.csv, possibly due to different flux energy range selected
[Sat Jan 14 10:01:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan 14 10:01:02 2012] Using Nh = 2.6e+22, photon index=1.68, rate=0.00446, arf fullrun_ccd0_acisf12676_pi14-548_pass1_cl_src28.arf
[Sat Jan 14 10:01:02 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Jan 14 10:01:02 2012] Updating source flux to 1.1e-13