[Mon Jan 14 09:17:51 2013] Detection parameters:
  Position = (511.4, 275.5) = 17 11 47.52 -39 43 38.9
  Extent = 1.2" x 1.1", rotation angle = 177 degrees
  Source counts = 42.7 +/- 12.4
  Background counts = 110.3
  Rate = 0.0005 +/- 0.0001

[Mon Jan 14 09:17:52 2013] Off-axis axis estimate = 9.97'
[Mon Jan 14 09:24:43 2013] Using EEF radius (= 4.40 ")to estimate initial spatial extent for simple fitting
[Mon Jan 14 09:24:43 2013] Initial guess for spatial extent in simple fitting = 4.40"
[Mon Jan 14 09:24:43 2013] source mask rpix=8.9, npix_max = 356, mask sum = 361, frac = 1.012
[Mon Jan 14 09:24:43 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 4.40"
[Mon Jan 14 10:26:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass0_src20.ximg exists
[Mon Jan 14 10:26:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass0_src20_1.ximg exists
[Mon Jan 14 10:26:11 2013] Fit fullrun_ccd0_acisf12671_pi14-548_cl_pass0_src20 appears to have run properly
[Mon Jan 14 10:26:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Mon Jan 14 10:26:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Jan 14 10:26:11 2013] Fit fullrun_ccd0_acisf12671_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Jan 14 11:57:08 2013] Spatial fit model total counts = 628.679000, observed total counts = 622.000000
[Mon Jan 14 11:57:08 2013] Offset between fit and detection position for source 27 = 2.350977 pixels
[Mon Jan 14 11:57:08 2013] 629.156000 total counts/ 460.046000 bgd. counts: snr = 7.884400
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.350977 pixels
  Position = (512.9, 277.4) = 17 11 47.48 -39 43 38.3
  Extent = 8.8 (8.8-17.6)" x 5.6 (3.8-8.4)", rotation angle = 76 (42-102) degrees
  Source counts = 169.1 +/- 25.1
  Background counts = 460.0
  Rate = 0.002 +/- 0.0003
[Mon Jan 14 11:57:08 2013] Vigneting correction estimate = 1.000000
[Mon Jan 14 11:57:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 14 11:57:08 2013] Assessing source extent using major axis lower bound
[Mon Jan 14 11:57:08 2013] Source does appear to be extended
[Mon Jan 14 11:57:08 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Mon Jan 14 11:57:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 14 11:57:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jan 14 11:57:36 2013] Initial guess for spatial extent in simple fitting = 7.22"
[Mon Jan 14 11:57:36 2013] source mask rpix=14.7, npix_max = 920, mask sum = 930, frac = 1.010
[Mon Jan 14 11:57:36 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 7.22"
[Mon Jan 14 12:58:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass1_src15.ximg exists
[Mon Jan 14 12:58:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12671_pi14-548_cl_pass1_src15.csv
[Mon Jan 14 12:58:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass1_src15_1.ximg exists
[Mon Jan 14 12:58:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12671_pi14-548_cl_pass1_src15.csv
[Mon Jan 14 12:58:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12671_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12671_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 14 12:58:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Mon Jan 14 12:58:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12671_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon Jan 14 12:58:11 2013] fullrun_ccd0_acisf12671_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Mon Jan 14 12:58:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12671_pi14-548_cl_pass1_tfrozen_src15.csv
[Mon Jan 14 12:58:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12671_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12671_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 14 14:03:41 2013] Spatial fit model total counts = 1611.590000, observed total counts = 1443.000000
[Mon Jan 14 14:03:41 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jan 14 14:03:41 2013] Vigneting correction estimate = 1.000000
[Mon Jan 14 14:03:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 14 14:03:41 2013] Assessing source extent using major axis lower bound
[Mon Jan 14 14:03:41 2013] Source does appear to be extended
[Mon Jan 14 14:03:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.04
[Mon Jan 14 14:04:06 2013] Writing source region out to fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27_src.reg
[Mon Jan 14 14:04:06 2013] Extracting stamp from image fullrun_ccd0_acisf12671_pi14-548_cl_sm2.00.img.gz, (110, 0) - (915, 680)
[Mon Jan 14 14:04:06 2013] Writing fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27.gif
[Mon Jan 14 14:11:21 2013] Size of ../../acisf12671/products/events/fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27_src.evt.gz[events] = 1089 counts
[Mon Jan 14 14:11:21 2013] Mean chipx,y = (435.82, 52.61)
[Mon Jan 14 14:11:21 2013] Mean tdetx,y = (3113.61, 4696.18)
[Mon Jan 14 14:11:21 2013] chipx,y range = (366.00-499.00, 3.00-128.00)
[Mon Jan 14 14:11:21 2013] Size of ../../acisf12671/products/events/fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 11980 counts
[Mon Jan 14 14:11:22 2013] rmf not found, will run specextract
[Mon Jan 14 14:11:22 2013] arf not found, will run specextract
[Mon Jan 14 14:11:34 2013] ../../acisf12671/products/spectra/fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27.warf not found
[Mon Jan 14 14:11:34 2013] ../../acisf12671/products/spectra/fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27.wrmf not found
[Mon Jan 14 14:11:34 2013] Removal of ../../acisf12671/products/spectra/fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27.soff failed
[Mon Jan 14 14:13:25 2013] Keeping rmf generated by specextract
[Mon Jan 14 14:13:25 2013] 144.589
[Mon Jan 14 14:50:53 2013] Updating aperture counts using extracted products
[Mon Jan 14 14:50:53 2013] Error reading totcts from fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27_src.pi.gz
[Mon Jan 14 14:50:53 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jan 14 14:50:53 2013] Using photon index=1.80, rate=0.00188, arf fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27.arf
[Mon Jan 14 14:50:53 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 14 14:50:53 2013] Updating source flux to 4e-14
[Mon Jan 14 14:50:58 2013] Flag p found in src. 27 procflags, skipping spectral fitting
[Mon Jan 14 14:51:10 2013] Reading fit data from acisf12671/analysis//spectral/fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27_pl.csv
[Mon Jan 14 14:51:10 2013] Spectral fit parameter nH value = 9.67379e+21
[Mon Jan 14 14:51:10 2013] Spectral fit parameter PhoIndex value = 2.08029
[Mon Jan 14 14:51:10 2013] Failed to get F(0.3-8.0) from acisf12671/analysis//spectral/fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27_pl.csv, possibly due to different flux energy range selected
[Mon Jan 14 14:51:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jan 14 14:51:10 2013] Using Nh = 9.7e+21, photon index=2.08, rate=0.00188, arf fullrun_ccd0_acisf12671_pi14-548_pass1_cl_src27.arf
[Mon Jan 14 14:51:10 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Jan 14 14:51:10 2013] Updating source flux to 3.2e-14