[Fri May  3 23:36:32 2013] Detection parameters:
  Position = (604.0, 1311.6) = 20 34 45.53 -31 58 5.8
  Extent = 0.9" x 0.8", rotation angle = 129 degrees
  Source counts = 16.4 +/- 4.1
  Background counts = 0.6
  Rate = 0.002 +/- 0.0004

[Fri May  3 23:36:32 2013] Off-axis axis estimate = 4.60'
[Fri May  3 23:43:27 2013] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Fri May  3 23:43:27 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 23:43:27 2013] Initial guess for spatial extent in simple fitting = 1.03"
[Fri May  3 23:43:27 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.119
[Fri May  3 23:43:27 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 1.03"
[Fri May  3 23:44:22 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass0_src1.ximg exists
[Fri May  3 23:44:22 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass0_src1_1.ximg exists
[Fri May  3 23:44:22 2013] Fit fullrun_ccd6_acisf12669_pi14-548_cl_pass0_src1 appears to have run properly
[Fri May  3 23:44:22 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri May  3 23:44:22 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri May  3 23:44:22 2013] Fit fullrun_ccd6_acisf12669_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri May  3 23:54:46 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 11.973451 pixels away
[Fri May  3 23:54:46 2013] Vigneting correction estimate = 1.000000
[Fri May  3 23:54:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 23:54:46 2013] Assessing source extent using major
[Fri May  3 23:54:46 2013] Source does appear to be extended
[Fri May  3 23:54:46 2013] Computing asymmetry using major and minor axis, asym = 1.15
[Sat May  4 00:00:51 2013] Using EEF radius (= 1.03 ")to estimate initial spatial extent for simple fitting
[Sat May  4 00:00:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  4 00:00:51 2013] Initial guess for spatial extent in simple fitting = 1.03"
[Sat May  4 00:00:51 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.119
[Sat May  4 00:00:51 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 1.03"
[Sat May  4 00:02:21 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass1_src1.ximg exists
[Sat May  4 00:02:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12669_pi14-548_cl_pass1_src1.csv
[Sat May  4 00:02:21 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass1_src1_1.ximg exists
[Sat May  4 00:02:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12669_pi14-548_cl_pass1_src1.csv
[Sat May  4 00:02:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12669_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12669_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 00:02:21 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat May  4 00:02:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12669_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat May  4 00:02:21 2013] fullrun_ccd6_acisf12669_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May  4 00:02:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12669_pi14-548_cl_pass1_tfrozen_src1.csv
[Sat May  4 00:02:21 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12669_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12669_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 00:11:43 2013] Spatial fit model total counts = 21.956500, observed total counts = 25.000000
[Sat May  4 00:11:43 2013] Offset between fit and detection position for source 1 = 0.565619 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.565619 pixels
  Position = (603.8, 1312.1) = 20 34 45.56 -31 58 5.8
  Extent = 1.4 (0.9-1.9)", rotation angle = 0
  Source counts = 21.1 +/- 4.6
  Background counts = 0.0
  Rate = 0.002 +/- 0.0005
[Sat May  4 00:11:43 2013] Vigneting correction estimate = 1.000000
[Sat May  4 00:11:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 00:11:43 2013] Assessing source extent using major axis lower bound
[Sat May  4 00:11:43 2013] Source does appear to be extended
[Sat May  4 00:11:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 00:12:23 2013] Writing source region out to fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1_src.reg
[Sat May  4 00:12:23 2013] Extracting stamp from image fullrun_ccd6_acisf12669_pi14-548_cl_sm2.00.img.gz, (539, 1247) - (668, 1377)
[Sat May  4 00:12:23 2013] Writing fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1.gif
[Sat May  4 00:12:25 2013] Size of ../../acisf12669/products/events/fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1_src.evt.gz[events] = 26 counts
[Sat May  4 00:12:25 2013] Mean chipx,y = (908.00, 46.15)
[Sat May  4 00:12:25 2013] Mean tdetx,y = (3783.00, 1748.15)
[Sat May  4 00:12:25 2013] chipx,y range = (888.00-932.00, 27.00-63.00)
[Sat May  4 00:12:25 2013] Size of ../../acisf12669/products/events/fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 17 counts
[Sat May  4 00:12:26 2013] Not generating rmf since there are only 21 counts
[Sat May  4 00:12:26 2013] arf not found, will run specextract
[Sat May  4 00:12:36 2013] ../../acisf12669/products/spectra/fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1.warf not found
[Sat May  4 00:12:36 2013] ../../acisf12669/products/spectra/fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1.wrmf not found
[Sat May  4 00:12:36 2013] Removal of ../../acisf12669/products/spectra/fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1.soff failed
[Sat May  4 00:15:09 2013] Spectrum 1 has only 21 counts, deleting rmf
[Sat May  4 00:15:09 2013] 191.244
[Sat May  4 00:20:45 2013] Updating aperture counts using extracted products
[Sat May  4 00:20:45 2013] Total counts from fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1_src.pi.gz = 26.00
[Sat May  4 00:20:45 2013] Total counts from fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1_bgd.pi.gz = 17.00
[Sat May  4 00:20:45 2013] Got source and background scale factors 0.000006, 0.000073
[Sat May  4 00:20:45 2013] User source parameters:
  Position = (603.8, 1312.1) = 20 34 45.56 -31 58 5.8
  Extent = 1.4 (0.9-1.9)", rotation angle = 0
  Source aperture counts = 24.6 +/- 6.2
  Background aperture counts = 1.4
  Rate = 0.002 +/- 0.0006

[Sat May  4 00:20:46 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 00:20:46 2013] Using photon index=1.80, rate=0.00213, arf fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1.arf
[Sat May  4 00:20:46 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sat May  4 00:20:46 2013] Updating source flux to 2.6e-14
[Sat May  4 00:20:52 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May  4 00:20:53 2013] acisf12669/analysis//spectral/fullrun_ccd6_acisf12669_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete