[Thu Sep 29 22:16:14 2011] Detection parameters:
  Position = (986.9, 725.0) = 11 25 12.42 -59 13 55.1
  Extent = 0.8" x 0.5", rotation angle = 26 degrees
  Source counts = 24.2 +/- 5.3
  Background counts = 3.8
  Rate = 0.0006 +/- 0.0001

[Thu Sep 29 22:16:15 2011] Off-axis axis estimate = 2.92'
[Thu Sep 29 22:25:45 2011] Using EEF radius (= 0.56 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:25:45 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Thu Sep 29 22:25:45 2011] source mask rpix=1.1, npix_max = 10, mask sum = 16, frac = 1.473
[Thu Sep 29 22:25:45 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.56"
[Thu Sep 29 22:25:46 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass0_src14.ximg exists
[Thu Sep 29 22:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00126_pi14-548_cl_pass0_src14.csv
[Thu Sep 29 22:25:46 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass0_src14_1.ximg exists
[Thu Sep 29 22:25:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00126_pi14-548_cl_pass0_src14.csv
[Thu Sep 29 22:25:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00126_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00126_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:25:48 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Thu Sep 29 22:25:48 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Thu Sep 29 22:25:48 2011] Fit fullrun_ccd6_acisf00126_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Thu Sep 29 22:26:53 2011] Spatial fit model total counts = 35.998500, observed total counts = 36.000000
[Thu Sep 29 22:26:53 2011] Offset between fit and detection position for source 15 = 0.614214 pixels
[Thu Sep 29 22:26:53 2011] 35.758700 total counts/ 12.147400 bgd. counts: snr = 6.774515
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.614214 pixels
  Position = (987.3, 725.5) = 11 25 12.43 -59 13 55.1
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 23.6 +/- 6.0
  Background counts = 12.1
  Rate = 0.0005 +/- 0.0001
[Thu Sep 29 22:26:53 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:26:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:26:53 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:26:53 2011] Source does appear to be extended
[Thu Sep 29 22:26:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:28:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 22:28:14 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Thu Sep 29 22:28:14 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.804
[Thu Sep 29 22:28:14 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.70"
[Thu Sep 29 22:28:15 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass1_src14.ximg exists
[Thu Sep 29 22:28:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00126_pi14-548_cl_pass1_src14.csv
[Thu Sep 29 22:28:15 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass1_src14_1.ximg exists
[Thu Sep 29 22:28:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf00126_pi14-548_cl_pass1_src14.csv
[Thu Sep 29 22:28:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf00126_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf00126_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 22:28:16 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Thu Sep 29 22:28:16 2011] fullrun_ccd6_acisf00126_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Sep 29 22:28:16 2011] Fit fullrun_ccd6_acisf00126_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Sep 29 22:29:07 2011] Spatial fit model total counts = 35.999100, observed total counts = 36.000000
[Thu Sep 29 22:29:07 2011] Offset between fit and detection position for source 15 = 0.013183 pixels
[Thu Sep 29 22:29:07 2011] 35.757900 total counts/ 12.101300 bgd. counts: snr = 6.800429
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.013183 pixels
  Position = (987.3, 725.5) = 11 25 12.42 -59 13 55.1
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 23.7 +/- 6.0
  Background counts = 12.1
  Rate = 0.0005 +/- 0.0001
[Thu Sep 29 22:29:07 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 22:29:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 22:29:07 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 22:29:07 2011] Source does appear to be extended
[Thu Sep 29 22:29:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 22:31:19 2011] Not overwriting source region fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_src.reg
[Thu Sep 29 22:31:19 2011] Extracting stamp from image fullrun_ccd6_acisf00126_pi14-548_cl_sm2.00.img.gz, (955, 693) - (1020, 758)
[Thu Sep 29 22:31:19 2011] Writing fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15.gif
[Thu Sep 29 22:32:24 2011] ../../acisf00126/products/events/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_src.evt and ../../acisf00126/products/events/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Thu Sep 29 22:32:24 2011] Size of ../../acisf00126/products/events/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_src.evt.gz[events] = 28 counts
[Thu Sep 29 22:32:24 2011] Mean chipx,y = (977.75, 317.64)
[Thu Sep 29 22:32:24 2011] Mean tdetx,y = (3852.75, 2019.64)
[Thu Sep 29 22:32:24 2011] chipx,y range = (956.00-995.00, 300.00-332.00)
[Thu Sep 29 22:32:24 2011] Size of ../../acisf00126/products/events/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 61 counts
[Thu Sep 29 22:32:24 2011] ../../acisf00126/products/images/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_src.img and ../../acisf00126/products/images/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Thu Sep 29 22:32:24 2011] ../../acisf00126/products/spectra/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_src.pi and ../../acisf00126/products/spectra/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Thu Sep 29 22:32:24 2011] Not generating rmf since there are only 23 counts
[Thu Sep 29 22:32:28 2011] ../../acisf00126/products/lightcurves/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_src.lc and ../../acisf00126/products/lightcurves/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Thu Sep 29 22:33:28 2011] 217.032
[Thu Sep 29 23:05:30 2011] Updating aperture counts using extracted products
[Thu Sep 29 23:05:30 2011] Error reading totcts from fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_src.pi.gz
[Thu Sep 29 23:05:31 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 23:05:31 2011] Using photon index=1.80, rate=0.000542, arf fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15.arf
[Thu Sep 29 23:05:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 23:05:31 2011] Updating source flux to 6.1e-15
[Thu Sep 29 23:06:25 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 23:06:26 2011] acisf00126/analysis//spectral/fullrun_ccd6_acisf00126_pi14-548_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete