[Fri Feb 24 21:42:43 2012] Detection parameters:
  Position = (265.2, 130.0) = 14 1 27.15 -63 29 47.6
  Extent = 2.0" x 1.2", rotation angle = 138 degrees
  Source counts = 25.9 +/- 6.5
  Background counts = 16.1
  Rate = 0.0005 +/- 0.0001

[Fri Feb 24 21:42:43 2012] Off-axis axis estimate = 6.39'
[Fri Feb 24 21:53:37 2012] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 21:53:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 21:53:37 2012] Initial guess for spatial extent in simple fitting = 1.83"
[Fri Feb 24 21:53:37 2012] source mask rpix=3.7, npix_max = 71, mask sum = 64, frac = 0.895
[Fri Feb 24 21:53:37 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 1.83"
[Fri Feb 24 22:15:44 2012] fullrun_ccd7_acisf12567_pi14-548_cl_pass0_src11.ximg exists
[Fri Feb 24 22:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12567_pi14-548_cl_pass0_src11.csv
[Fri Feb 24 22:15:44 2012] fullrun_ccd7_acisf12567_pi14-548_cl_pass0_src11_1.ximg exists
[Fri Feb 24 22:15:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12567_pi14-548_cl_pass0_src11.csv
[Fri Feb 24 22:15:44 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12567_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12567_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 22:15:44 2012] fullrun_ccd7_acisf12567_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Fri Feb 24 22:15:44 2012] fullrun_ccd7_acisf12567_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Feb 24 22:15:44 2012] Fit fullrun_ccd7_acisf12567_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Feb 24 22:15:51 2012] Spatial fit model total counts = 52.469700, observed total counts = 47.000000
[Fri Feb 24 22:15:51 2012] Offset between fit and detection position for source 17 = 0.759771 pixels
[Fri Feb 24 22:15:51 2012] 53.196400 total counts/ 40.203900 bgd. counts: snr = 2.049079
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.759771 pixels
  Position = (265.9, 129.8) = 14 1 27.13 -63 29 48.0
  Extent = 0.5" x 0.5", rotation angle = 0
  Source counts = 13.0 +/- 7.3
  Background counts = 40.2
  Rate = 0.0002 +/- 0.0001
[Fri Feb 24 22:15:51 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 22:15:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 22:15:51 2012] Assessing source extent using major
[Fri Feb 24 22:15:51 2012] Source does appear to be extended
[Fri Feb 24 22:15:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:15:51 2012] Deleting source due to low Poisson probability 0.7