[Fri Feb 24 21:42:20 2012] Detection parameters:
  Position = (790.2, 764.0) = 13 59 42.23 -63 20 17.5
  Extent = 4.2" x 2.3", rotation angle = 64 degrees
  Source counts = 40.0 +/- 8.4
  Background counts = 31.0
  Rate = 0.0008 +/- 0.0002

[Fri Feb 24 21:42:21 2012] Off-axis axis estimate = 8.71'
[Fri Feb 24 21:44:31 2012] Using EEF radius (= 3.35 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 21:44:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 21:44:31 2012] Initial guess for spatial extent in simple fitting = 3.35"
[Fri Feb 24 21:44:31 2012] source mask rpix=6.8, npix_max = 213, mask sum = 193, frac = 0.902
[Fri Feb 24 21:44:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.35"
[Fri Feb 24 21:53:37 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass0_src1.ximg exists
[Fri Feb 24 21:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12567_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 21:53:37 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Feb 24 21:53:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12567_pi14-548_cl_pass0_src1.csv
[Fri Feb 24 21:53:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12567_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12567_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 21:53:37 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Feb 24 21:53:37 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Feb 24 21:53:37 2012] Fit fullrun_ccd6_acisf12567_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Feb 24 22:15:48 2012] Spatial fit model total counts = 113.796000, observed total counts = 115.000000
[Fri Feb 24 22:15:48 2012] Offset between fit and detection position for source 1 = 1.663427 pixels
[Fri Feb 24 22:15:48 2012] 113.605500 total counts/ 82.740100 bgd. counts: snr = 3.393235
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.663427 pixels
  Position = (790.0, 765.7) = 13 59 42.28 -63 20 17.0
  Extent = 2.3 (1.7-4.2)", rotation angle = 0
  Source counts = 30.9 +/- 10.7
  Background counts = 82.7
  Rate = 0.0006 +/- 0.0002
[Fri Feb 24 22:15:48 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 22:15:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 22:15:48 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 22:15:48 2012] Source does appear to be extended
[Fri Feb 24 22:15:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:15:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 22:15:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 22:15:59 2012] Initial guess for spatial extent in simple fitting = 2.32"
[Fri Feb 24 22:15:59 2012] source mask rpix=4.7, npix_max = 108, mask sum = 96, frac = 0.883
[Fri Feb 24 22:15:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.32"
[Fri Feb 24 22:24:15 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 24 22:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12567_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 22:24:15 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 24 22:24:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12567_pi14-548_cl_pass1_src1.csv
[Fri Feb 24 22:24:15 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12567_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12567_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 22:24:15 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 24 22:24:15 2012] fullrun_ccd6_acisf12567_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 24 22:24:15 2012] Fit fullrun_ccd6_acisf12567_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 24 22:30:27 2012] Warning, spatial fit 1 centroid is now closest to src. 7
[Fri Feb 24 22:30:27 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 22:30:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 22:30:27 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 22:30:27 2012] Source does appear to be extended
[Fri Feb 24 22:30:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 22:30:37 2012] Writing source region out to fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1_src.reg
[Fri Feb 24 22:30:37 2012] Extracting stamp from image fullrun_ccd6_acisf12567_pi14-548_cl_sm2.00.img.gz, (684, 660) - (896, 872)
[Fri Feb 24 22:30:37 2012] Writing fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1.gif
[Fri Feb 24 22:30:38 2012] Size of ../../acisf12567/products/events/fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1_src.evt.gz[events] = 69 counts
[Fri Feb 24 22:30:38 2012] Mean chipx,y = (180.88, 665.80)
[Fri Feb 24 22:30:38 2012] Mean tdetx,y = (3055.88, 2367.80)
[Fri Feb 24 22:30:38 2012] chipx,y range = (150.00-210.00, 636.00-696.00)
[Fri Feb 24 22:30:38 2012] Size of ../../acisf12567/products/events/fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 291 counts
[Fri Feb 24 22:30:39 2012] Not generating rmf since there are only 30 counts
[Fri Feb 24 22:30:39 2012] arf not found, will run specextract
[Fri Feb 24 22:31:06 2012] ../../acisf12567/products/spectra/fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1.warf not found
[Fri Feb 24 22:31:06 2012] ../../acisf12567/products/spectra/fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1.wrmf not found
[Fri Feb 24 22:31:06 2012] Removal of ../../acisf12567/products/spectra/fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1.soff failed
[Fri Feb 24 22:36:14 2012] Spectrum 1 has only 31 counts, deleting rmf
[Fri Feb 24 22:36:14 2012] 170.003
[Fri Feb 24 22:37:45 2012] Updating aperture counts using extracted products
[Fri Feb 24 22:37:45 2012] Error reading totcts from fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Feb 24 22:37:45 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 22:37:45 2012] Using photon index=1.80, rate=0.000585, arf fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1.arf
[Fri Feb 24 22:37:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 22:37:45 2012] Updating source flux to 1.1e-14
[Fri Feb 24 22:37:48 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Feb 24 22:37:49 2012] acisf12567/analysis//spectral/fullrun_ccd6_acisf12567_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete