[Sun May  5 17:10:43 2013] Detection parameters:
  Position = (572.0, 684.4) = 11 55 51.34 55 22 28.1
  Extent = 0.7" x 0.5", rotation angle = 48 degrees
  Source counts = 14.7 +/- 3.9
  Background counts = 0.3
  Rate = 0.001 +/- 0.0004

[Sun May  5 17:10:44 2013] Off-axis axis estimate = 3.26'
[Sun May  5 17:50:01 2013] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Sun May  5 17:50:01 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Sun May  5 17:50:01 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.935
[Sun May  5 17:50:01 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 0.64"
[Sun May  5 17:59:31 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass0_src5.ximg exists
[Sun May  5 17:59:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass0_src5.csv
[Sun May  5 17:59:31 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass0_src5_1.ximg exists
[Sun May  5 17:59:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass0_src5.csv
[Sun May  5 17:59:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12563_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12563_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:59:31 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun May  5 17:59:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass0_tfrozen_src5.csv
[Sun May  5 17:59:31 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May  5 17:59:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass0_tfrozen_src5.csv
[Sun May  5 17:59:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12563_pi14-548_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12563_pi14-548_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 17:59:35 2013] Spatial fit model total counts = 10.150500, observed total counts = 16.000000
[Sun May  5 17:59:35 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 17:59:35 2013] Vigneting correction estimate = 1.000000
[Sun May  5 17:59:35 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 17:59:35 2013] Assessing source extent using major
[Sun May  5 17:59:35 2013] Source does appear to be extended
[Sun May  5 17:59:35 2013] Computing asymmetry using major and minor axis, asym = 1.50
[Sun May  5 18:26:32 2013] Using EEF radius (= 0.64 ")to estimate initial spatial extent for simple fitting
[Sun May  5 18:26:32 2013] Initial guess for spatial extent in simple fitting = 0.64"
[Sun May  5 18:26:32 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.935
[Sun May  5 18:26:32 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 0.64"
[Sun May  5 18:35:55 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass1_src5.ximg exists
[Sun May  5 18:35:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass1_src5.csv
[Sun May  5 18:35:55 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass1_src5_1.ximg exists
[Sun May  5 18:35:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass1_src5.csv
[Sun May  5 18:35:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12563_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12563_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 18:35:55 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Sun May  5 18:35:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass1_tfrozen_src5.csv
[Sun May  5 18:35:55 2013] fullrun_ccd7_acisf12563_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May  5 18:35:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12563_pi14-548_cl_pass1_tfrozen_src5.csv
[Sun May  5 18:35:55 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12563_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12563_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 18:35:59 2013] Spatial fit model total counts = 10.150500, observed total counts = 16.000000
[Sun May  5 18:35:59 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 18:35:59 2013] Vigneting correction estimate = 1.000000
[Sun May  5 18:35:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 18:35:59 2013] Assessing source extent using major
[Sun May  5 18:35:59 2013] Source does appear to be extended
[Sun May  5 18:35:59 2013] Computing asymmetry using major and minor axis, asym = 1.50
[Sun May  5 18:42:31 2013] Writing source region out to fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10_src.reg
[Sun May  5 18:42:31 2013] Extracting stamp from image fullrun_ccd7_acisf12563_pi14-548_cl_sm2.00.img.gz, (538, 651) - (606, 718)
[Sun May  5 18:42:31 2013] Writing fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10.gif
[Sun May  5 18:43:42 2013] Size of ../../acisf12563/products/events/fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10_src.evt.gz[events] = 15 counts
[Sun May  5 18:43:42 2013] Mean chipx,y = (587.33, 487.47)
[Sun May  5 18:43:42 2013] Mean tdetx,y = (4504.33, 2189.47)
[Sun May  5 18:43:42 2013] chipx,y range = (569.00-600.00, 477.00-507.00)
[Sun May  5 18:43:42 2013] Size of ../../acisf12563/products/events/fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 6 counts
[Sun May  5 18:43:43 2013] Not generating rmf since there are only 14 counts
[Sun May  5 18:43:43 2013] arf not found, will run specextract
[Sun May  5 18:43:50 2013] ../../acisf12563/products/spectra/fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10.warf not found
[Sun May  5 18:43:50 2013] ../../acisf12563/products/spectra/fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10.wrmf not found
[Sun May  5 18:43:50 2013] Removal of ../../acisf12563/products/spectra/fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10.soff failed
[Sun May  5 18:47:38 2013] Spectrum 10 has only 15 counts, deleting rmf
[Sun May  5 18:47:38 2013] 225.681
[Sun May  5 18:47:42 2013] Updating aperture counts using extracted products
[Sun May  5 18:47:42 2013] Total counts from fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10_src.pi.gz = 15.00
[Sun May  5 18:47:42 2013] Total counts from fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10_bgd.pi.gz = 6.00
[Sun May  5 18:47:42 2013] Got source and background scale factors 0.000001, 0.000020
[Sun May  5 18:47:42 2013] User source parameters:
  Position = (572.0, 684.4) = 11 55 51.34 55 22 28.1
  Extent = 0.7" x 0.5", rotation angle = 48
  Source aperture counts = 14.7 +/- 5.0
  Background aperture counts = 0.3
  Rate = 0.001 +/- 0.0005

[Sun May  5 18:47:42 2013] Updating counts from extracted products
[Sun May  5 18:47:42 2013] Set source signif. to 14.66/0.58 = 25.20
[Sun May  5 18:47:43 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 18:47:43 2013] Using photon index=1.80, rate=0.00148, arf fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10.arf
[Sun May  5 18:47:43 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Sun May  5 18:47:43 2013] Updating source flux to 1.1e-14
[Sun May  5 18:47:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 18:47:52 2013] acisf12563/analysis//spectral/fullrun_ccd7_acisf12563_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete