[Wed May  1 07:59:17 2013] Detection parameters:
  Position = (1051.5, 524.3) = 13 29 57.54 47 10 27.7
  Extent = 0.5" x 0.5", rotation angle = 43 degrees
  Source counts = 11.5 +/- 3.5
  Background counts = 0.5
  Rate = 0.001 +/- 0.0004

[Wed May  1 07:59:17 2013] Off-axis axis estimate = 1.36'
[Wed May  1 08:40:44 2013] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Wed May  1 08:40:44 2013] Initial guess for spatial extent in simple fitting = 0.39"
[Wed May  1 08:40:44 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.361
[Wed May  1 08:40:44 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 0.39"
[Wed May  1 09:02:35 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass0_src20.ximg exists
[Wed May  1 09:02:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12562_pi14-548_cl_pass0_src20.csv
[Wed May  1 09:02:35 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass0_src20_1.ximg exists
[Wed May  1 09:02:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12562_pi14-548_cl_pass0_src20.csv
[Wed May  1 09:02:35 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12562_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12562_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 09:02:35 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Wed May  1 09:02:35 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Wed May  1 09:02:35 2013] Fit fullrun_ccd7_acisf12562_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Wed May  1 09:02:41 2013] Spatial fit model total counts = 10.114000, observed total counts = 12.000000
[Wed May  1 09:02:41 2013] Offset between fit and detection position for source 9 = 0.505971 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.505971 pixels
  Position = (1051.7, 524.8) = 13 29 57.55 47 10 27.7
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.1-0.3)", rotation angle = 97 (81-115) degrees
  Source counts = 10.5 +/- 3.2
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May  1 09:02:41 2013] Vigneting correction estimate = 1.000000
[Wed May  1 09:02:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 09:02:41 2013] Assessing source extent using major axis lower bound
[Wed May  1 09:02:41 2013] Source does appear to be extended
[Wed May  1 09:02:41 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Wed May  1 09:29:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May  1 09:29:13 2013] Initial guess for spatial extent in simple fitting = 0.36"
[Wed May  1 09:29:13 2013] source mask rpix=0.7, npix_max = 6, mask sum = 6, frac = 0.977
[Wed May  1 09:29:13 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 0.36"
[Wed May  1 09:50:40 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass1_src20.ximg exists
[Wed May  1 09:50:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12562_pi14-548_cl_pass1_src20.csv
[Wed May  1 09:50:40 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass1_src20_1.ximg exists
[Wed May  1 09:50:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12562_pi14-548_cl_pass1_src20.csv
[Wed May  1 09:50:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12562_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12562_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 09:50:40 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Wed May  1 09:50:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12562_pi14-548_cl_pass1_tfrozen_src20.csv
[Wed May  1 09:50:40 2013] fullrun_ccd7_acisf12562_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Wed May  1 09:50:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12562_pi14-548_cl_pass1_tfrozen_src20.csv
[Wed May  1 09:50:40 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12562_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12562_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 09:50:47 2013] Spatial fit model total counts = 10.355300, observed total counts = 12.000000
[Wed May  1 09:50:47 2013] Offset between fit and detection position for source 9 = 0.030126 pixels
[Wed May  1 09:50:47 2013] 10.593160 total counts/ 0.002360 bgd. counts: snr = 217.997545
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.030126 pixels
  Position = (1051.7, 524.8) = 13 29 57.55 47 10 27.7
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.1-0.3)", rotation angle = 97 (81-116) degrees
  Source counts = 10.6 +/- 3.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed May  1 09:50:47 2013] Vigneting correction estimate = 1.000000
[Wed May  1 09:50:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May  1 09:50:47 2013] Assessing source extent using major axis lower bound
[Wed May  1 09:50:47 2013] Source does appear to be extended
[Wed May  1 09:50:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Wed May  1 09:58:26 2013] Writing source region out to fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9_src.reg
[Wed May  1 09:58:26 2013] Extracting stamp from image fullrun_ccd7_acisf12562_pi14-548_cl_sm2.00.img.gz, (1028, 501) - (1075, 548)
[Wed May  1 09:58:26 2013] Writing fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9.gif
[Wed May  1 10:03:54 2013] Size of ../../acisf12562/products/events/fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9_src.evt.gz[events] = 11 counts
[Wed May  1 10:03:54 2013] Mean chipx,y = (161.91, 660.36)
[Wed May  1 10:03:54 2013] Mean tdetx,y = (4078.91, 2362.36)
[Wed May  1 10:03:54 2013] chipx,y range = (143.00-176.00, 647.00-676.00)
[Wed May  1 10:03:54 2013] Size of ../../acisf12562/products/events/fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 6 counts
[Wed May  1 10:03:55 2013] Not generating rmf since there are only 10 counts
[Wed May  1 10:03:55 2013] arf not found, will run specextract
[Wed May  1 10:04:03 2013] ../../acisf12562/products/spectra/fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9.warf not found
[Wed May  1 10:04:03 2013] ../../acisf12562/products/spectra/fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9.wrmf not found
[Wed May  1 10:04:03 2013] Removal of ../../acisf12562/products/spectra/fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9.soff failed
[Wed May  1 10:06:33 2013] Spectrum 9 has only 11 counts, deleting rmf
[Wed May  1 10:06:33 2013] 231.959
[Wed May  1 10:06:40 2013] Updating aperture counts using extracted products
[Wed May  1 10:06:40 2013] Total counts from fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9_src.pi.gz = 11.00
[Wed May  1 10:06:40 2013] Total counts from fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9_bgd.pi.gz = 6.00
[Wed May  1 10:06:40 2013] Got source and background scale factors 0.000000, 0.000009
[Wed May  1 10:06:40 2013] User source parameters:
  Position = (1051.7, 524.8) = 13 29 57.55 47 10 27.7
  Extent = 0.5 (0.4-0.8)" x 0.2 (0.1-0.3)", rotation angle = 97 (81-116) degrees
  Source aperture counts = 10.8 +/- 4.4
  Background aperture counts = 0.2
  Rate = 0.001 +/- 0.0005

[Wed May  1 10:06:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May  1 10:06:41 2013] Using photon index=1.80, rate=0.0011, arf fullrun_ccd7_acisf12562_pi14-548_pass1_cl_src9.arf
[Wed May  1 10:06:41 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Wed May  1 10:06:41 2013] Updating source flux to 8.3e-15
[Wed May  1 10:06:47 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting